Electrical properties of polypyrrole/p‐InP structure

The polypyrrole/p‐InP structure has been fabricated by the electrochemical polymerization of the organic polypyrrole onto the p‐InP substrate. The current–voltage (I–V), capacitance–voltage (C–V), and capacitance–frequency (C–f) characteristics of the PPy/p‐InP structure have been determined at room temperature. The structure showed nonideal I–V behavior with the ideality factor and the barrier height 1.48 and 0.69 eV respectively. C–f measurements of the structure have been carried out using the Schottky capacitance spectroscopy technique and it has been seen that there is a good agreement between the experimental and theoretical values. Also, it has been seen that capacitance almost show a plateau up to a certain value of frequency, after which, the capacitance decreases. The higher values of capacitance at low frequencies were attributed to the excess capacitance resulting from the interface states in equilibrium with the p‐InP that can follow the a.c. signal. The interface state density N_ss and relaxation time τ of the structure were determined from C–f characteristics. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1572–1579, 2006     

基于界面跟踪方法的汽蚀模型和算法的有效性验证

针对两相附着汽蚀流动机理,基于界面跟踪方法发展了新的汽蚀模型和算法。所发展的汽蚀模型和算法不仅考虑了液相／气相界面处的压力差,而且考虑了耦合Reynolds-Averaged Navier-Stokes方程求解技术得到的流场压力梯度信息来迭代计算附着汽蚀形状。采用具有试验数据的半球形头部圆柱体汽蚀绕流作为算例来验证所提出的汽蚀模型和算法的有效性。采用不同的网格数和松弛因子数值验证了发展的汽蚀模型和算法的有效性。三种汽蚀数下的数值计算结果得到的压力系数分布与试验数据完全吻合。结果表明所提出的汽蚀模型和算法能够准确模拟出汽蚀发生点和汽蚀长度。     

Antiplane time-harmonic green’s functions for a circular inhomogeneity with an imperfect interface

Two-dimensional antiplane time-harmonic Green’s functions for a circular inhomogeneity with an imperfect interface are derived. Here the linear spring model with vanishing thickness is employed to characterize the imperfect interface. Explicit expressions for the displacement and the stress fields induced by time-harmonic antiplane line forces located both in the unbounded matrix and in the circular inhomogeneity are presented. When the circular frequency approaches zero, our results reduce to those for the static case. Numerical results are presented to show the influence of the frequency and the imperfection of the interface on the stress and displacement fields.     

各向异性接合材料界面端部场数值分析

为了求解各向异性接合材料界面端部奇异性应力场,建立了一种新型杂交元模型.该模型的独特之处在于:基于有限元特征法得到的奇异性场数值特征解建立了一种新型界面端奇异单元.通过算例证明,新型杂交元模型能够利用较少的单元数获得较为精确的数值结果.当前模型应用范围广泛,能够用于复杂结构的界面端部场求解.     

三维立体成像及其应用

本文首先介绍了三种传统的主要三维立体成像方法，即透镜板三维成像方法，投影式三维显示和全息照相术，其次，重点对于采用计算机产生的三维立体景象的方法进行了综述，其中包括人们近年来研究较多的自动立体成像技术等，最后给出了三维立体成像技术在航空航天，工业，教育，医学，军事等领域的应用实例，并预测了三维立体成像技术今后的主要发展方向。     

新型的数字音频系统—数字盒式磁带（DCC）原理

数字盒式磁带录音机,简称DCC,是一种将现有的盒式磁带与数字声频相结合的产物。它采用了新的有效的精确自适应子带编码技术,简称PASC,使重放的声音达到CD的音质。PASC依据数字声频中两个新的原理:与人耳的听觉特性相适应原理和有效的自适原应理。DCC系统可以与模拟音乐盒带兼容,现有的盒带可以在DCC放音设备上重放。     

Design considerations and an example of application of an in-house made TG-MS interface

The design, the abilities and a characteristic application of an in-house made interface for combining thermogravimetry (TG) with mass spectrometry (MS) are presented. The TG-MS interface consists mainly of three co-axial tubes. The position of the intermediate tube was determined after calculation of the temperature profile at the TG furnace exit tube. The inner tube position was determined taking into consideration its protection against condensation of heavy molecules and the time delay for the transfer of the evolved gases. This interface allows either continuous sampling and transferring of the evolved gases from the TG to the MS or repetitive introduction of short sampling pulses of TG evolved gases to MS. The interface is capable of coupling various commercial instruments. In the present work two configurations of this interface are demonstrated. Finally an example of application of this interface on forest fuel pyrolysis is presented. This revised version was published online in July 2006 with corrections to the Cover Date.     

薄层液/液界面电子转移动力学的研究进展

薄层循环伏安法是研究液/液界面电荷转移的一种新方法,具有简单、快速、易操作的优点。文章回顾了液/液界面电化学的发展历史,介绍了薄层法的实验原理,对其在电化学中的应用和研究进展进行了评述,总结了界面驱动力与电子转移速率的关系。     

表面能与晶体生长/溶解动力学研究的新动向

界面现象使物质在结晶过程中出现了临界现象.但最近的研究指出在物质溶解过程中,在表面能量的控制下也存在着临界现象以及尺寸效应.实验发现,当晶体自身小到一 定的程度时(通常在纳米尺度上并和临界蚀坑的大小相近),在溶解过程中其速度会自发降 低,反应被抑制乃至停止.尽管在热力学上表面能的因素可以赋予小颗粒晶体较大的溶解度 ,但表面能却也能通过对临界条件的控制而使这些微粒在动力学上不被溶解.这个发现不仅 解决了纳米颗粒在水溶液中稳定性的问题,而且还从动力学的角度解释了生物矿物选择纳米 尺度作为其基本构成单元的原因.由于表面能和晶体生长/溶解的动力学有着密切的关系, 我们可以通过对表面能的调节来修改它们的动力学速度和晶体的形貌.反过来,也可以用动力学的方法来测定表面能及表面吸附/脱附常数等.相对于常规的界面研究手段,通过生 长和溶解动力学途径所得的数据有着很好的可靠性及重复性.我们认为,晶体生长和溶解的 动力学和表面能的研究相结合,不仅为界面研究提供了新的思路和方法,而且也会推动晶体生长和材料科学的发展.