IPv4/IPv6翻译网关的研究

In this paper, a model of translation gateway is proposed. The communications between IPv4 network and IPv6 network are realized by using the Microsoft intermediate driver technology in environment of Windows 2000.     

SW233 PIN驱动器自动测试系统的研制

介绍了一种集成电路自动测试系统，该系统采用计算机并口作通信接口，用VB6编程，实现了对外围测试电路的控制，用IEEE-488接口卡控制测试仪器，可对SW233电路的36个参数进行自动测试，并将测试结果自动保存在数据库中。该测试系统具有自动化程度高、操作方便、测试结果精确等特点。     

适用于LED显示屏或照明工程的异步控制卡DS2000-M1

DS2000-M1是高性能、开放式的LED控制系统,本文从软硬件两方面简述其设计原理。     

A hybrid finite-element–volume-of-fluid method for simulating free surface flows and interfaces

A numerical technique is developed for the simulation of free surface flows and interfaces. This technique combines the strength on the finite element method (FEM) in calculating the field variables for a deforming boundary and the versatility of the volume-of-fluid (VOF) technique in advection of the fluid interfaces. The advantage of the VOF technique is that it allows the simulation of interfaces with large deformations, including surface merging and breaking. However, its disadantage is that is solving the flow equations, it cannot resolve interfaces smaller than the cell size, since information on the subgrid scale is lost. Therefore the accuracy of the interface reconstruction and the treatment of the boundary conditions (i.e. viscous stresses and surface tension forces) become grid-size-dependent. On the other hand, the FEM with deforming interface mesh allows accurate implementation of the boundary conditions, but it cannot handle large surface deformations occurring in breaking and merging of liquid regions. Combining the two methods into a hybrid FEM-VOF method eliminates the major shortcomings of both. The outcome is a technique which can handle large surface deformations with accurate treatment of the boundary conditions. For illustration, two computational examples are presented, namely the instability and break-up of a capillary jet and the coalescence collision of two liquid drops.     

Structural anisotropy in friction‐deposited layers of polystyrene

Friction‐deposited layers of atactic polystyrene (PS) on inert and OH‐grafted gold substrates were the subject of this study to establish a relationship between the friction process and the resulting anisotropy of the transferred polymer chains. We show, by using polarization‐modulation infrared reflection‐absorption spectroscopy that the deposited PS chains involve an anisotropy in which PS main backbone is rather perpendicular to the friction support, fact that is surprising when compared with the majority of polymers where the anisotropy is along the sliding direction. Moreover, our calculation of the orientation angles revealed that PS chains are more perpendicular in the transferred layers than in spin‐coated films. This particular anisotropy is probably due to a parallel reorientation of the phenyl ring on the friction support whatever the surface chemistry is. On the other hand, this study was useful to rectify the assignment of infrared bands unclearly reported in the literature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3272–3281, 2006     

Electrical properties of polypyrrole/p‐InP structure

The polypyrrole/p‐InP structure has been fabricated by the electrochemical polymerization of the organic polypyrrole onto the p‐InP substrate. The current–voltage (I–V), capacitance–voltage (C–V), and capacitance–frequency (C–f) characteristics of the PPy/p‐InP structure have been determined at room temperature. The structure showed nonideal I–V behavior with the ideality factor and the barrier height 1.48 and 0.69 eV respectively. C–f measurements of the structure have been carried out using the Schottky capacitance spectroscopy technique and it has been seen that there is a good agreement between the experimental and theoretical values. Also, it has been seen that capacitance almost show a plateau up to a certain value of frequency, after which, the capacitance decreases. The higher values of capacitance at low frequencies were attributed to the excess capacitance resulting from the interface states in equilibrium with the p‐InP that can follow the a.c. signal. The interface state density N_ss and relaxation time τ of the structure were determined from C–f characteristics. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1572–1579, 2006     

三维立体成像及其应用

本文首先介绍了三种传统的主要三维立体成像方法，即透镜板三维成像方法，投影式三维显示和全息照相术，其次，重点对于采用计算机产生的三维立体景象的方法进行了综述，其中包括人们近年来研究较多的自动立体成像技术等，最后给出了三维立体成像技术在航空航天，工业，教育，医学，军事等领域的应用实例，并预测了三维立体成像技术今后的主要发展方向。     

新型的数字音频系统—数字盒式磁带（DCC）原理

数字盒式磁带录音机,简称DCC,是一种将现有的盒式磁带与数字声频相结合的产物。它采用了新的有效的精确自适应子带编码技术,简称PASC,使重放的声音达到CD的音质。PASC依据数字声频中两个新的原理:与人耳的听觉特性相适应原理和有效的自适原应理。DCC系统可以与模拟音乐盒带兼容,现有的盒带可以在DCC放音设备上重放。     

Design considerations and an example of application of an in-house made TG-MS interface

The design, the abilities and a characteristic application of an in-house made interface for combining thermogravimetry (TG) with mass spectrometry (MS) are presented. The TG-MS interface consists mainly of three co-axial tubes. The position of the intermediate tube was determined after calculation of the temperature profile at the TG furnace exit tube. The inner tube position was determined taking into consideration its protection against condensation of heavy molecules and the time delay for the transfer of the evolved gases. This interface allows either continuous sampling and transferring of the evolved gases from the TG to the MS or repetitive introduction of short sampling pulses of TG evolved gases to MS. The interface is capable of coupling various commercial instruments. In the present work two configurations of this interface are demonstrated. Finally an example of application of this interface on forest fuel pyrolysis is presented. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effects of Amplitude of the Radiofrequency Electromagnetic Radiation on Aqueous Suspensions and Solutions

The effects of radiofrequency (RF) (1–4) and magnetic fields (5–9) on the behavior of aqueous solutions and suspensions have been a popular subject in recent years. The mechanism of the magnetic “water memory” effect, though, is still largely unknown (5). In this work, we present evidence that the primary “receptor” of the electromagnetic radiation is a gas/liquid interface. Gas can be either already present in water or produced by the effects of electromagnetic fields. Perturbed gas/liquid interfaces require hours to equilibrate. Certain RF and magnetic signals also produce reactive oxygen and hydrogen species (superoxide, hydrogen peroxide, hydrogen, atomic hydrogen). The perturbed gas/liquid interface modifies the hydrogen bonding networks in water and also the hydration of ions and interfaces. Careful outgassing removes all of the effects of the electromagnetic fields, including the magnetic memory effect. The amplitude of the applied field influences the observed effects. Different amplitudes of RF radiation perturb the interfacial water in different ways and consequently affect the behavior of colloids and ions in specific manners. For instance, the bulk and template precipitation of calcium carbonate, zeta potentials of suspended colloids, rate of dissolution of colloidal silica, and attachment of colloidal silica to metal surfaces are modified in specific ways with the low amplitude or high amplitude RF treatments described in this paper. The solubility/diffusivity of gas species is also modified in a different manner, and it is probably at the core of the specificity of the RF amplitude effects.