基于半定规划的阵列天线方向图旁瓣抑制

基于半定规划理论提出了一种新的阵列天线方向图旁瓣抑制算法。与传统旁瓣抑制方法不同,该方法通过合理设计优化准则,避免了在凸优化问题建模过程中引入近似,保证了波束形成器的最优性;并且使得在压低旁瓣的同时,可准确控制信噪比增益和主瓣宽度到期望的范围之内。该方法对阵列流形没有限制,计算机仿真结果验证了其有效性。     

干涉仪测向技术现状与发展研究

从解模糊和天线排列形式、鉴相技术、通道幅相不一致校正方法和接收数据处理方式四个方面论述了干涉仪测向技术的现状和发展趋势。对每一方面现存的不同实现方法的主要原理和优劣性做了详细说明和比较,探讨了下一步的发展和改进思路。为干涉仪测向装备在特定条件下应用技术的选择提供理论依据,为新装备的研制提供参考意见。     

热处理气氛对 TiO2 纳米管阵列薄膜光电催化性能的影响

 采用原位阳极氧化法在 Ti 基底上制备了高度有序的 TiO₂ 纳米管阵列薄膜, 分别在 O₂, 空气, Ar 和 H₂ 气氛中于 500 oC 进行结晶热处理, 考察了热处理气氛对 TiO₂ 纳米管阵列薄膜光电催化降解亚甲基蓝 (MB) 反应性能的影响. 结果表明, 在这些气氛中热处理得到的锐钛矿晶型的纳米管阵列薄膜对 MB 降解满足一级反应, 其速率常数分别为 4.967, 3.127, 1.989 和 1.625 h^-1 (0.5 V). 电化学阻抗分析表明, TiO₂ 纳米管的光电催化性能受控于光生电荷的传递特性. 在 O₂ 中热处理, TiO₂ 纳米管的光吸收及激发性能得以改善, 且电荷传递阻抗降低, 因而其光电催化性能最好.     

CdS量子点敏化ZnO纳米棒阵列电极的制备和光电化学性能

采用连续式离子层吸附与反应法制备了CdS量子点敏化的ZnO纳米棒电极.应用扫描电子显微镜(SEM)、X射线衍射(XRD)和透射电子显微镜(TEM)对CdS量子点/ZnO纳米棒电极的形貌、晶型和颗粒尺寸进行了分析和表征;采用光电流-电位曲线和光电流谱研究了不同CdS循环沉积次数及不同沉积浓度对复合电极的光电性能影响.结果表明,前驱体浓度都为0.1mol·L-1且沉积15次敏化后的ZnO纳米棒阵列电极光电性能最好.与单纯的ZnO纳米棒阵列电极和单纯的CdS量子点电极相比,其光电转换效率显著提高,单色光光子-电流转换效率(IPCE)在380nm处达到76%.这是因为CdS量子点可以拓宽光的吸收到可见光区,并且在所形成的界面上光生载流子更容易分离.荧光光谱实验进一步说明了光电增强的原因是,两者间形成的界面中表面态大大减少,有利于减少光生电子和空穴的复合.     

激光等离子体微推进技术的研究进展

为了加快激光等离子体微推进技术(μLPP)在航天领域的应用,介绍了该项技术近10年的发展状况。讨论了激光等离子体微推进技术发展过程中衍生出的各种工作模式,并简略分析了不同工作模式的优缺点。着重介绍了靶特性对激光微推进性能的影响,包括靶材的选择、靶的结构、靶材掺杂,以及靶物相特性等。针对该项技术的最终发展目标是研制微小卫星姿轨控的激光等离子体微推力器(μLPT),介绍并分析了美国Phipps小组开展的激光微推力器的研制工作。最后,指出了激光等离子体微推进技术目前存在的一些问题,并展望了它的发展前景。     

单纵模671nm红光激光器

利用全波片和Nd:YVO4激光器的偏振特性构成双折射滤光片,使用I类临界相位匹配LBO作为倍频晶体,在注入泵浦功率2.7W的情况下获得149mW的671nm单纵模红光输出,光-光转换率5.6%,该结构简单、紧凑,适合用于中低功率激光器。     

Modeling and characterization of fiber Bragg grating for maximum reflectivity

This paper presents the modeling and characterization of an optical fiber grating for maximum reflectivity. Grating length and change in refractive index are the critical parameters in contributing to the performance of fiber Bragg grating. The wavelength chosen for analysis is from the third window to minimize the attenuation. The reflection spectra, bandwidth and side lobes strength were analyzed with different lengths and change in refractive index. The simulations are based on solving coupled mode equations by transfer matrix method that describes the interaction of guided modes.     

Diffraction errors in micromirror-array based wavefront generation

Using Laser-based Speckle-Interferometers, the shape of optically rough surfaces can be measured precisely and contactlessly from variable measuring distances even in regions of difficult access. This work is concerned with the integration of a micromirror array (MMA) into an electronic Speckle-Pattern-Interferometer. With the adaptive optics, it is intended to adapt the phasefront of a reference wave to critical surface areas of the measurement object. Yet, due to the topography of the MMA, diffraction effects occur which affect the phase and intensity of the generated wavefront. We demonstrate how these diffraction effects can be efficiently modelled by a Fraunhofer diffraction method. We compare the results of this model to theoretical data obtained by a numerical Fresnel diffraction model and to measurement data obtained from a measurement setup incorporating a multi mirror array.     

Long-exposure far-field properties of the array of mutually-injected fiber lasers

In this paper, the long-exposure far-field properties of the array of mutually-injected fiber lasers are studied to understand the effect of the multiple phase-locked states on coherent beam combining of the array. It is found that the long-exposure far-field will degenerate into the superposition of the intensities of the elementary lasers when all the phase-locked states of the array are exported with the same probability. It means that the interference pattern will be greatly weakened in the long-exposure far-field because of the export of multiple phase-locked states of the array. This result implies that the multiple phase-locked states of the array go against coherent beam combining of the array, and only some of these phase-locked states should be exported. Then, the effects of the high-order phase-locked states on the far-field are discussed. The result suggests that only the in-phase state should be exported (i.e., all the other phase-locked states should be suppressed) in order to realize high-efficiency (> 80%) coherent beam combining when the number of the elementary lasers of the array is smaller than 19.