平面阵列波导光栅波导模式参量的分析

用周期波导的方法分析平面阵列波导光栅(AWG)的本征方程及波导模式参数,结果表明波导传播常数是带状分布的,与波导间隔有关。分析结果对器件的优化设计有一定的指导意义。     

Multiple Scan Chain Design for Two-Pattern Testing

Non-standard fault models often require the application of two-pattern testing. A fully-automated approach for generating a multiple scan chain-based architecture is presented so that two-pattern test sets generated for the combinational core can be applied to the sequential circuit. Test time and area overhead constraints are considered.     

基于ASP.NET技术的新闻发布系统的设计与实现

完整描述了一种在部队师旅级单位通用的新闻发布系统。首先根据用户的特点,对系统进行了需求分析与功能模块划分,然后在此基础上从系统架构、系统流程和数据库设计等3个方面阐述了系统设计中的关键点,并以设计用户登录界面为例写出了部分功能的实现程序,最后对其在中小型企业建站中的应用进行了展望。     

VFP环境下报表设计研究

Visual FoxPro是小型数据库应用系统开发工具,而报表设计是数据库应用系统开发的一个重要组成部分,直接决定系统的输出是否能够满足用户的需要。为此详细研究了报表设计方法,结合Microsoft的OLE技术,引入面向对象方法,提出了一种新的报表设计方法。实践应用证明,该方法非常适合设计复杂的报表。     

无线通信的跨层优化

传统的OSI分层结构无法适应无线网络环境，随着越来越多无线应用的出现，人们提出了跨层设计，其主要内容就是通过在协议栈的各层之间（主要是应用层、传输层、网络层、链路层和物理层）传递特定的信息，使协议栈能够根据无线环境的变化来实现对资源的自适应优化配置，从而更有效的利用无线网络资源，提高系统的性能。     

交流伺服系统在玻璃裂片机中的应用

随着运动控制技术的飞速发展，交流伺服系统应用的日益广泛。介绍了液晶生产中的关键设备玻璃裂片机，并详细分析松下MINAS A系列交流伺服系统在玻璃裂片机中的应用。     

结构振动试验转接器的设计及安装问题

一些产品及其相关部件在作振动试验时，由于产品的外形或特殊要求不能直接安装在振动台面上，需要通过特别设计的转接器（夹具）来进行连接，这种夹具实际上是一种附加结构，它作为台面与试件之间的中介，如设置不当将影响振动试验结果的可靠性。本文通过对某事例的分析与研究，从试验频带、允许误差、跟随条件以及安装共振频率等方面阐明与讨论了相关夹具的特性、设计原则与安装等问题。     

一般阵列误差情况下信号二维方向角估计

针对均匀圆阵存在一般阵列误差的情况,提出一种信号二维方向角估计方法.基于均匀圆阵的阵列流形和阵列输出的协方差矩阵,采用加权总体最小二乘法估计信号二维方向角.并给出了解整周期性模糊的方法.计算机仿真表明了此方法估计精度高,对阵列误差鲁棒性强,并且各项性能都接近于CRB.     

动感像素全息母版图案的设计制作研究

本文介绍了一种新颖的数码像素全息高速拍摄装置来实现全息母版的制作。提出和介绍了运用Photoshop软件一些特殊的图像处理功能设计制作动感像素全息图的方法,并结合多种防伪技术,使产生的图案具有不可仿制的图形畸变特点,并列举了设计实例。     

Protecting local access telecommunications networks: Toward a minimum-cost solution

The problem of designing fibre-optic networks for local-access telecommunications generates (at least) three non-trivial subproblems. In the first of these subproblems one must determine how many fibre-optic cables (fibres) are required at either end of a street. In the next subproblem a minimum-cost network must be designed to support the fibres. The network must also provide distinct paths from either end of the street to the central exchange(s). Finally, the fibre-optic cables must be placed in protective covers. These covers are available in a number of different sizes, allowing some flexibility when covering each section of the network. In this paper we describe a dynamic programming (DP) formulation for finding a minimum-cost (protective) covering for the network (the third of the subproblems). This problem is a generalised set covering problem with side constraints and is further complicated by the introduction of fixed and variable welding costs. The DP formulation selects covers along each arc (in the network), but cannot exactly model the fixed costs and so does not guarantee optimality. We also describe an integer programming (IP) formulation for assessing the quality of the DP solutions. The cost of the networks constructed by the IP model is less than those designed using the DP model, but the saving is not significant for the problems examined (less than 0.1%). This indicates that the DP model will generally give very good solutions. Furthermore, as the problem dimensions grow, DP gives significantly better solution times than IP.