过氧化苯甲酰的光敏电荷转移分解反应及引发甲基丙烯酸甲酯的聚合

过氧化苯甲酰(BPO)的光诱导分解曾为许多工作者所注意。Walling和Gibian认为:以二苯酮为敏化剂时,BPO的敏化光解是通过三重态的能量转移过程。Encinas和Lissi则认为敏化是通过单重激发态使激发能转移至过氧化物基态的热振动态,从而导致过氧化物的分解。Tokumarur是最早提出过氧化苯甲酰光敏化诱导分解过程中存在着激基复合物(Exciplex)的可能性。最近他们又进一步研究以BPO为猝灭剂去猝     

Pre-Column Derivatization of Amines with 1,2-Benzo-3,4-Dihydrocarbazole-9-Isopropyl Chloroformate Followed by LC-Fluorescence and LC-APCI-MS

A pre-column derivatization method for the sensitive determination of amines using the labeling reagent 1,2-benzo-3,4-dihydrocarbazole-9-isopropyl chloroformate (BCIC-Cl) followed by high-performance liquid chromatography with fluorescence detection has been developed. Identification of derivatives is carried out by high performance liquid chromatography/atmospheric pressure chemical ionization (LC-APCI-MS-MS). The chromophore of 2-(9-carbazole)-ethyl chloroformate (CEOC) reagent is replaced by 1,2-benzo-3,4-dihydrocarbazole-9-isopropyl functional group, which results in a sensitive fluorescence derivatizing reagent BCIC-Cl. BCIC-Cl can easily and quickly label amines. Derivatives are stable enough to be efficiently analyzed by high-performance liquid chromatography and show an intense protonated molecular ion corresponding m/z [MH]⁺ under APCI in positive-ion mode. The collision-induced dissociation of protonated molecular ion formed a product at m/z 260 corresponding to the cleavage of CH₂-OCO bond. Studies on derivatization demonstrate excellent derivative yields over the pH 9.0–10.0. Maximal yields close to 100% are observed with a 3 to 4-fold molar reagent excess. In addition, the detection responses for BCIC derivatives are compared with those obtained using CEOC and FMOC as derivatization reagents. The ratios of I_BCIC/I_CEOC and I_BCIC/I_FMOC are, respectively, 1.23–3.14 and 1.25–3.08 for fluorescent (FL) responses (here, I is relative fluorescence intensity). Separation of the derivatized amines had been optimized on reversed-phase Eclipse XDB-C₈ column. Detection limits are calculated from 1.0 pmol injection, at a signal-to-noise ratio of 3, are 10.6–37.8 fmol. The mean interday accuracy ranges from 94 to 105% for fluorescence detection with the largest mean %CV<7.5. The mean interday precision for all standards is < 6.0% of the expected concentration. Excellent linear responses are observed with coefficients of > 0.9997. Revised: 12 December 2005 and 13 Febrauary 2006     

COMPOSITION OF THE ESSENTIAL OIL OF Haplophyllum myrtifolium

The chemical composition of the essential oil ofHaplophyllum myrtifoliumBoiss., endemic to Turkey, was examined by GC/MS. Ninety-seven compounds were characterized with linalool (12.8%), -caryophyllene (10.3 %), and methyleugenol (5.9 %) as the main constituents.     

Purine Nucleoside Analogs. 12. Synthesis of Novel 8,9-Disubstituted Guanine Derivatives by S-Alkylation of 2-Acetamido-9-(2-acetoxyethoxymethyl)-6-oxo-8-thioxopurine

S-Alkylation of 2-acetamido-9-(2-acetoxyethoxymethyl)-6-oxo-8-thioxopurine was used to synthesize its novel S- and N₍₇₎-substituted derivatives. We have established the effect of the structure of the alkylating agent on the reaction conditions and its regioselectivity. We have shown that the synthesized guanine derivatives can be modified further.     

Intramolecular Diels—Alder reaction of 4-(N-furfuryl)aminobut-1-enes. New approach to the synthesis of 6,8a-epoxyoctahydroisoquinoline (3-aza-11-oxatricyclo[6.2.1.01,6]undec-9-ene) derivatives

The intramolecular Diels—Alder reaction of readily accessible 4-substituted 4-(N-furfuryl)aminobut-1-enes was studied and a new one-step method was developed for the synthesis of 6,8a-epoxy-1,2,3,4,4a,5,6,8a-octahydroisoquinoline (3-aza-11-oxatricyclo[6.2.1.0^1,6]undec-9-ene) derivatives. The [4+2]-cycloaddition proceeds stereoselectively to form exo-adducts. The influence of substituents at the nitrogen atom in 4-(N-furfuryl)aminobut-1-enes on the cycloaddition pathway was examined.     

Synthesis and characterisation of bis(pentafluorophenyl)antimony(V) cations, [(C6F5)2SbL3]

Pentacoordinate complex cations of the general formula [(C₆F₅)₂SbL₃]³⁺ stabilized as solid salts in combination with tetraphenylborate (BPh₄), tetrafluorobroate (BF₄) anions, where L=DMSO, Ph₃AsO, PyO, DMF, α-, β- and γ-picoline have been isolated. The newly formed complexes were characterized by elemental analysis, molar conductance measurements, solid-state IR and and NMR. From these results, a five-fold coordination around antimony was required.     

α,ω-Diisocyanatocarbodiimides, -Polycarbodiimides,and Their Derivatives

Research in the field of low-molecular weight, oligomeric and polymeric α,ω-diisocyanatocarbodiimides and -polycarbodiimides has been fruitful, not only in connection with these compounds themselves, but also—as so often happens in chemistry—with quite different problems. Novel synthetic methods, discoveries concerning the properties of low-molecular weight carbodiimides and phosphane imide derivatives, as well as results on the fragmentation reactions of four-membered heterocyclic compounds containing oxygen, phosphorus, and nitrogen, and a better understanding of the diisocyanate polyaddition process are among the many by-products of this research. The “high- and low-temperature formation” of polycarbodiimides and the homogeneous and heterogeneous catalysis of this process are described, and the fundamental importance of four-membered ring fragmentation mechanisms resulting in the formation of phosphane imide derivatives is outlined. Interesting building blocks for the diisocyanate polyaddition and polycondensation processes can be synthesized by many derivatization reactions of oligomeric and high-molecular weight polycarbodiimides and polyuretonimines. The in situ production of polycarbodiimides via matrix reactions in flexible polyurethane foams leads to a cellular arrangement of the material due to the pronounced symmetrical growth processes. Combination-foams with increased carbonation tendencies are formed in this way. Attention is drawn to several industrial applications of α,ω-diisocyanatopolycarbodiimides, of high-molecular weight cross-linked polyuretonimines, and of polycarbodiimide foams.     

Selective Oxidation of Betulin by Cr(VI) Reagents

Oxidation of betulin by pyridinium dichromate, pyridinium chlorochromate, and K₂Cr₂O₇ -H₂SO₄ in the presence of tetrabutylammonium bromide was studied. Products of regioselective C-3, C-28-, and exhaustive oxidation, 28-hydroxylup-20(29)-3-one, 3-hydroxy- and 3-oxolup-20(29)-en-28-al were obtained.     

Derivatization of carboxylic acids with 9-bromomethylacridine using micellar phase-transfer catalysis

Summary Micellar phase-transfer catalysis (MPTC) offers the opportunity to derivatize carboxylic acids directly in an aqueous matrix without prior extraction of the acids into a suitable aprotic solvent. The currently developed MPTC system consists of a non-ionic surfactant, Arkopal N-130, an ion-pair agent, tetrakis-(decyl)-ammonium bromide, and a novel fluorescence reagent, 9-bromomethylacridine. The MPTC system can be applied to the derivatization of many types of carboxylic acids. The reaction rate is affected by the lipophilicity of the acid and by the presence of other functional groups. For lipophilic carboxylic acids the reaction is complete within 5 min at 60°C and pH 7.0.     

Morphology Control over the Organic Nanoparticles of 1,3-Diphenyl-5-（9-anthryl）-2-pyrazoline

The organic nanoparticles of a blue-light-emitting molecule, 1,3-diphenyl-5-(9-anthryl)-2-pyrazuline, were prepared by reprecipitation method using acetonitrile as the solvent for the molecular precursor. Three morphologies, spherical, doughnut-shaped and cubic, could be observed on the silicon substrate forthe nanoparfides by the volume-controlled addition of acetonitrile. The evolution of particle morphology as a function of acetonitrile addition was attributed to the variation of the growth habits of the particles in the different environment. The nanoparticles exhibit the novel photoluminescence spectra as compared to those of monomer and the bulk crystals.