New antenna design approach – 3D polymer printing and metallization. experimental test at 14–18 GHz

This paper proves a new approach for rapid prototyping of radio antennas through 3D printing and chemical metallization. For this purpose, a standard metal pyramidal horn prototype is compared with its 3D printed replica. Three different 3D polymer printers are tested. The printed samples are assessed nondestructively by an X-ray Industrial Computed Tomography (CT) scanner, and then metalized via chemical deposition and chemical-electrochemical deposition. Copper with two different layer thicknesses and nickel materials are deployed and verified as a metallization opportunity. Again the CT scanner, X-ray fluorescent analysis and nanoindentation technique were used to perform the metallization quality estimation. As a result, a qualitative polymer prototype was produced having weight of 13 g – ten times lighter than the original. The prototype was successfully metalized and was able to be soldered. The radio-measurement comparison with the metal original for frequencies 14–18 GHz showed no significant differences. Finally, a simple dynamometric test confirmed the bonding between the metal and the polymer. To the best of our knowledge this is the first known comprehensive analysis of the possibility to print 3D lightweight wideband polymer antenna prototypes with a stable chemical metallization and radio properties very close to the original at 14–18 GHz.     

Performance analysis of multi‐antenna relay communication systems with MRC

The performance of multi‐antenna relay communication systems is investigated in this letter. The source broadcasts the signal to all the relays and the destination. Decode‐and‐forward scheme is adopted at the relays, and the destination employs maximum ratio combining (MRC) technique to maximize the received signal‐to‐noise ratio. Closed‐form expressions of outage probability are derived in the MRC case and minimum routes MRC case. An adaptive grouping algorithm of relay antennas is also presented under the constraint of total antenna number. Simulation results show that the analytical curves agree with the simulated ones very well, and the performance of the proposed grouping algorithm is very close to the upper bound mentioned in other papers. Copyright © 2012 John Wiley & Sons, Ltd.     

Design and analysis of implantable CPW fed bowtie antenna for ISM band applications

A novel implantable coplanar waveguide (CPW) fed crossed bowtie antenna is proposed for short-range biomedical applications. The antenna is designed to resonate at 2.45 GHz, one of the industrial-scientific-medical (ISM) bands. It is investigated by use of the method of moments design equations and its simulation software (IE3D version 15). The size of the antenna is 371.8 mm³ (26 mm × 22 mm × 0.65 mm). The simulated and analyzed return losses are −23 and −25 dB at the resonant frequency of 2.45 GHz. We have analyzed some more performances of the proposed antenna and the results show that the proposed antenna is a perfect candidate for implantation. The proposed antenna has substantial merits like low profile, miniaturization, lower return loss and better impedance matching with high gain over other implanted antennas.     

A Low‐Cost Method to Evaluate Absorber Reflectivity Using an Antenna with a Small Radiating Aperture and Frequency‐Domain Instrument

We propose a way to measure the absorber reflectivity at a low cost. Only one simple antenna with a small radiating aperture and a frequency‐domain instrument are utilized. The previously used equation for calculating the reflectivity of an absorber is inaccurate, and, therefore, a new equation is derived based on multiple reflection analysis and three test models. Notably, the reflection coefficient of the antenna is included in the derived equation. The accuracy of the proposed method is proven through simulation and measurements. It can be easily applied to a product examination by absorber manufacturers and customers owing to its advantages of simplicity, cost effectiveness, and non‐cutting examination.     

甘蓝夜蛾信息素类似物的设计合成及初步活性研究

甘蓝夜蛾隶属鳞翅目夜蛾科,主要危害甘蓝、西兰花、萝卜等十字花科蔬菜。与传统的化学农药防治相比,昆虫信息素防治具有专一性强、灵敏度高、绿色环保、同时不会误伤天敌等优点。但天然信息素易降解、持效期短,长期单一使用会诱导昆虫产生抗性等问题。针对这些问题,本文设计并合成了4种结构新颖的信息素类似物:反-11-十六碳烯-3-氯丙酸酯(G1)、反-11-十六碳烯-2-溴丙酸酯(G2)、11,12-二氟十六烷基-1-醇(G3)、11,12-二氟十六烷基乙酸酯(G4),并表征了其结构。通过触角电生理试验(EAG)初步测试了G1~G4的室内生物活性。     

超越SNOM探针通光孔径尺寸的金属纳米间隙超分辨测量

采用电磁场有限元方法,数值模拟了孔径型扫描近场光学显微镜(aperture Scanning Near-field Optical Microscopy,a-SNOM)在照明模式下的工作过程.针对金偶极天线结构,改变天线长度和纳米间隙尺寸,计算了a-SNOM探针孔径的远场辐射速率随探针端面中心坐标变化的扫描曲线,实现了超越a-SNOM探针通光孔径尺寸的天线金属纳米间隙的超分辨测量,对于100nm通光孔径的探针,可分辨最小尺寸为10nm(0.016倍波长)的金属间隙.通过对比金属和介质偶极天线的a-SNOM探针远场辐射速率测量的计算结果,表明天线金属纳米间隙的超分辨测量的实现是由于金属间隙表面等离激元的激发.     

一种用于星载SAR天线的转动控制技术

针对星载合成孔径雷达（SAR）天线要求在超低转速下平稳转动，同时满足小型化轻量化的要求，本文提出一种基于微步距模式的天线转动控制技术，该技术使用两个带PWM电路的全桥驱动器通过微步距方式驱动步进电机。在给出系统架构、微步距控制原理后，进一步提出可靠性设计的具体措施。经测试和环境试验验证，该技术对同类应用具有一定的参考价值。     

低截止频率多倍频程高增益对跖Vivaldi天线北大核心CSCD

针对传统对跖Vivaldi天线的最低截止工作频率较高、增益较低和方向性较差的问题,文中设计了一种新型超宽带对跖Vivaldi天线。融合运用辐射极板开矩形斜槽、加载吸收电阻和寄生矩形贴片等一系列电磁调控措施,扩展了天线的低频工作带宽;采取在天线极板间加载椭圆寄生贴片的技术方式大幅提高了天线的方向性和辐射增益。最后给出了天线的设计流程,从电场分布和表面电流分布的角度揭示了天线的微观工作机制。仿真和实测结果表明:天线的工作频带为0.85~16 GHz(近20倍频程),相对带宽达180%,在3 GHz以上频段增益均超过10 dBi,并且具有较好的端射方向性,在超宽带无线通信、雷达探测、电子对抗和遥感遥测等领域具有广泛的应用前景。     

A narrow-frame antenna for WWAN/LTE/WiMAX/WLAN mobile phones

In this paper, we present a novel narrow-frame antenna with a size of 75 × 8 × 5.8 mm³ for 5.7 in. mobile phones. The antenna mainly consists of a monopole with four branches that are coupled to a two-branch grounded strip. Our antenna is able to cover more bands than other narrow-frame antennas by excitation of several resonant modes. The improved range of the antenna covers the following eleven bands: LTE700, GSM850, GSM900, DCS, PCS, UMTS, LTE2300, LTE2500, LTE3400 (3400–3800 MHz)/WiMAX3.5 GHz (3400–3650 MHz), WLAN5.2 GHz (5150–5350 MHz) and WLAN5.8 GHz (5725–5875 MHz). Another advantage of the proposed antenna is that it does not need any lumped element to match the antenna. The working principles of the proposed antenna are thoroughly studied. A prototype of the proposed antenna is fabricated and measured, with the results in good agreement with the simulation results.     

基于火箭遥测的地面站接收信号情况预估方法

火箭尾焰造成的信号衰减是地面测量点位选择重点考虑的问题,通常采用传统β角确定火箭尾焰对遥测地面站接收信号的影响程度。针对新型固体火箭发射中β角分析法对遥测地面站接收信号情况预测不准确的问题,文中在分析影响遥测地面站信号接收因素的基础上,提出了一种采用信号衰减方向性预估遥测地面站接收信号情况的模型。通过分析火箭遥测实测飞行姿态、位置以及地面遥测设备实际跟踪信号情况确定了模型参数,并通过实例计算证明了该方法优的优越性。