Hydrodynamic voltammetry at the liquid|liquid interface: facilitated ion transfer and the rotating diffusion cell

A new approach to the voltammetric investigation of facilitated ion transfer processes is reported. The technique uses a rotating diffusion cell approach to induce laminar flow in the organic phase of a liquid|liquid electrochemical cell. The interface between two immiscible electrolyte solutions (ITIES) was stabilised against rotation with either γ-alumina or a track-etched polyester membrane. The resultant voltammetry is shown to be consistent with the Koutecký–Levich equation enabling kinetic parameters associated with facilitated transfer of sodium by dibenzo-18-crown-6 across the water|1,2-dichloroethane interface to be evaluated. In particular, the use of the more hydrophilic alumina membrane permits the uncertainties regarding the use of the membrane-stabilised ITIES, namely the interfacial position, to be eliminated.     

Molecular dynamics and phase transitions in phospholipid monolayers at liquid-liquid interfaces

Stablen-hexadecane/water andn-tetradecane/water macroemulsions containing monolayers of natural (egg yolk lecithin, EY) and synthetic (dimyristoylphosphatidylcholine, DMPC) phospholipids at liquid-liquid interfaces were prepared. The existence of the monolayers was proved by studying the reduction kinetics of a surface-active spin probe with ascorbate anions. Spin labeled derivatives of stearic acid in which the nitroxide group is locared at different distances from the polar head (5-, 12-, and 16-doxylstearic acids) were used to study the temperature dependences of the molecular ordering, rotational mobility, and local polarity in the monolayers in emulsions and also in bilayers in liposomes obtained from the same lipids. In the EY monolayers, the degree of spin probe solubilization is higher, while the order parameters (S) and rotational correlation times (τ) are lower than those in EY bilayers. The differences between these parameters for mono- and bilayers increase with an increase in the distance of the reporter group from the aqueous phase. In the DMPC monolayers, a first-order phase transition was detected by measuring the temperature dependences ofS and τ. The temperature region of the phase transition in monolayers is shifted to lower temperatures with respect to that for bilayers and depends on the nature of the oil phase. It was concluded that the phospholipid monolayers in emulsions incorporate hydrocarbon molecules, whose concentration in the DMPC monolayers increases on going from the low-temperature (gel) to the high-temperature (liquid crystal) phase. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 418–425, March, 1998.     

Cyclic voltammetry of highly hydrophilic ions at a supported liquid membrane

Cyclic voltammetry has been used to study the coupling of ion transfer reactions at a liquid membrane. The liquids are either supported by a porous hydrophobic membrane (polyvinylidene difluoride, PVDF) when the organic solvent is non-volatile (o-nitrophenyloctylether) or are merely a free standing organic solvent layer such as 1,2-dichloroethane comprised between two hydrophilic dialysis membranes supporting the adjacent aqueous phases. The passage of current across the liquid membrane is associated with two ion transfer reactions across the two polarised liquid liquid interfaces in series. It is shown that it is possible to study the transfer of highly hydrophilic ions at one interface by limiting the mass transfer of the other ion transfer reaction at the other interface. Indeed, for systems comprising an ion M in one aqueous phase and a reference ion R partitioned between the membrane and the other aqueous phase, the observed and simulated cyclic voltammograms have a half-wave potential determined by the Gibbs energy of transfer of M transferring at one interface and by the limiting mass transfer of R at the other interface. This new methodology opens a way to measure the Gibbs energy of transfer of highly hydrophilic or hydrophobic ions, which usually limits the potential window at single liquid liquid interfaces (ITIES).     

离子交换树脂负载Ni—B无定形合金催化剂的制备与性能

制备了一种新型离子交换树脂负载的Ｎｉ－Ｂ无定形合金催化剂．用３种树脂作为催化剂载体，即弱酸型阳离子树脂Ｄ１５２，强酸型阳离子树脂Ｄ７２及强碱型阴离子树脂Ｄ２６１．用ＸＰＳ、ＴＥＭ和ＩＣＰ等技术对催化剂进行了表征．结果表明，催化剂上镍与带有功能基的载体树脂之间有着很强的相互作用，但其强度与所带的功能基有关．３种催化剂Ｎｉ２ｐ３／２的ＸＰＳ谱图上，ＮｉＢ／Ｄ１５２催化剂的氧化态峰最小，而ＮｉＢ／Ｄ２６１的氧化态峰最大．异丙醇脱氢反应活性实验证实了这一结果．     

Morphology and degradation of biodegradable poly(L-lactide-co-β-malic acid)

Poly(L -lactide-co-β-malic acid) was obtained after the hydrogenolysis of the copolymer of L -lactide (L-LA) and β-benzyl malate (MA). ¹H-NMR demonstrated that the composition of the copolymer was identical to the feeding dose. Thermal property study revealed the morphology of the copolymer could be changed from semi-crystalline to amorphous with increasing hydrophilic β-malic acid content. The copolymers with 8 and 13 mol% β-malic acid content possessed enough mechanical property for fabricating cell scaffold. Degradation result demonstrated that most of the hydrophilic β-malic acid units broke down from the copolymer within 1 week and the ester bond between L -lactide and β-malic acid hydrolyzed prior to the inner ester bond of poly(L -lactide) (PLLA). Copyright © 2003 John Wiley & Sons, Ltd.     

Wetting of surfactant solutions by alkanes.

Ellipsometry, surface tensiometry, and contact-angle measurement have been used to study the transition between partial wetting and pseudo-partial wetting of surfactant solutions by alkanes. In the partial wetting regime, the air-water surface tension is the same with and without alkane. In the pseudo-partial wetting regime, the air-water surface tension is lowered by the presence of alkane, showing that oil is solubilised into the surfactant monolayer. A discontinuous change in the coefficient of ellipticity with increasing surfactant concentration provides unequivocal evidence for the first-order nature of the wetting transitions. Ellipsometry has been used to explore the generality of wetting transitions of alkanes (dodecane, hexadecane, and squalane) on surfactant solutions [dodecyltrimethylammonium bromide, tetredecyltrimethylammonium bromide, dibucaine hydrochloride, and Aerosol OT (AOT)]. Of the systems studied, only hexadecane on AOT solutions did not show a wetting transition. Excess alkane remains as a lens on the surface of the surfactant solutions at all concentrations, but the contact angle is a minimum at the wetting transition. A semiquantitative model for the variation of the contact angle with surfactant concentration is provided.     

Investigation of the rigid amorphous fraction in Nylon-6

A three-phase model, comprising crystalline, mobile amorphous, and rigid amorphous fractions (χ _c, χ _MA, χ _RA, respectively) has been applied in the study of semicrystalline Nylon-6. The samples studied were Nylon-6 alpha phase prepared by subsequent annealing of a parent sample slowly cooled from the melt. The treated samples were annealed at 110°C, then briefly heated to 136°C, then re-annealed at 110°C. Temperature-modulated differential scanning calorimetry (TMDSC) measurements allow the devitrification of the rigid amorphous fraction to be examined. We observe a lower endotherm, termed the ‘annealing’ peak in the non-reversing heat flow after annealing at 110°C. By brief heating above this lower endotherm and immediately quenching in LN₂-cooled glass beads, the glass transition temperature and χ _RA decrease substantially, χ _MA increases, and the annealing peak disappears. The annealing peak corresponds to the point at which partial de-vitrification of the rigid amorphous fraction (RAF) occurs. Re-annealing at 110°C causes the glass transition and χ _RA to increase, and χ _MA to decrease. None of these treatments affected the measured degree of crystallinity, but it cannot be excluded that crystal reorganization or recrystallization may also occur at the annealing peak, contributing to the de-vitrification of the rigid amorphous fraction. Using a combined approach of thermal analysis with wide and small angle X-ray scattering, we analyze the location of the rigid amorphous and mobile amorphous fractions within the context of the Heterogeneous and Homogeneous Stack Models. Results show the homogeneous stack model is the correct one for Nylon-6. The cooperativity length (ξ_A) increases with a decrease of rigid amorphous fraction, or, increase of the mobile amorphous fraction. Devitrification of some of the RAF leads to the broadening of the glass transition region and shift of T _g.     

Perfluoro-1,3,5-tris(p-oligophenyl)benzenes: Amorphous Electron-Transport Materials with High-Glass-Transition Temperature and High Electron Mobility

Perfluoro-1,3,5-tris(p-quaterphenyl)benzene (PF-13Y) and perfluoro-1,3,5-tris(p-quinquephenyl)benzene (PF-16Y) have been synthesized and characterized. They showed higher glass transition temperatures compared with perfluoro-1,3,5-tris(p-terphenyl)benzene (PF-10Y). Organic light-emitting diodes were fabricated using these materials as the electron-transport layers. PF-13Y and -16Y are better electron transporters than PF-10Y. The electron mobilities of PF-10Y and Alq₃ were measured by the time-of-flight technique. PF-10Y showed higher electron mobilities (10⁻⁴ cm²/V s) and weaker electric field dependence compared with Alq₃.     

Computer simulation of electron transfer processes across the electrode|electrolyte interface: a treatment of solvent and electrode polarizability

A polarizable molecular dynamics model for adiabatic electron transfer across the electrode|electrolyte interface is presented. The electronic polarizability of the water and of the metal electrode is accounted for by a dynamical fluctuating charge algorithm, image charges, and the Ewald summation adapted for a conducting interface. The effects of the solvent electronic polarizability are studied by computing the diabatic and adiabatic free energy curves for both polarizable and non-polarizable water models. This represents the first effort to compute the adiabatic free energy curves from simulation for a fully polarizable electrochemical system.     

Interface interactions in modulated phases,and upsilon points

Certain features in Frenkel-Kontorova and other models of phases with a one-dimensional modulation can be analyzed by assuming parallel interfaces separating sets of lattice planes belonging to two different phases, and treating the free energy to create interfaces, as well as the interaction of two, three, or more interfaces, as phenomenological parameters. A strategy employed by Fisher and Szpilka for interacting defects can be extended to the case of interfaces, allowing a systematic study of the phase diagram by ignoring all interface interactions, and then successively taking into account pair, triple, and higher-order terms. The possible phase diagrams which can occur near the point where =0 include: various sorts of endpoints analogous to critical endpoints, an accumulation point of first-order transitions and triple points, and a self-similar structure which we call an upsilon point, which turns out to be an accumulation point of an infinite number of segments of first-order transition lines, each of which terminates in two upsilon points.