Interaction of Naproxen with Crystalline and Amorphous Methylated β-Cyclodextrin in the Liquid and Solid State

Abstract

Interactions of naproxen (NAP) with amorphous, randomly methylated β-cyclodextrin at a degree of substitution per anhydroglucose unit of 1.8 (RAMEB) and with crystalline heptakis-(2,6-di-O-methyl)-β-cyclodextrin (DIMEB) were studied in aqueous solution and in the solid state using, respectively, phase-solubility analysis (at 25 °C, 37 °C and 47 °C) and differential scanning calorimetry (DSC) supported by X-ray powder diffractometry. RAMEB and DIMEB displayed similar solubilizing and complexing abilities towards NAP, suggesting analogous inclusion modes of the drug in the host cavity in aqueous solution. Differences were instead observed in interactions in the solid state, where the amorphizing capacity of RAMEB toward NAP (evaluated by DSC) was about twice that of DIMEB at each drug-to-carrier ratio. Assuming that inclusion complexation is also involved in solid-state interactions, molecular modelling accounted for the experimental results in terms of structural features of DIMEB, i.e. the particular inwards orientation of O-6-C-8 groups of three alternate glucoses on the primary hydroxyl side which hampers a deep penetration of NAP in the DIMEB cavity in the solid state. On the contrary, no obstruction of the cavity apparently occurs with RAMEB due its noncrystalline state. The aqueous dissolution rate of NAP from NAP-RAMEB and NAP-DIMEB blends containing 0.59, 0.73, 0.85, and 0.92 mass fraction of carrier linearly increased at decreasing drug-to-carrier ratios. The improvement was 5 to 20 times (from powders) and 50 to 200 times (from discs) the dissolution rate of NAP alone for both carrier. Therefore the choice of the amorphous RAMEB in pharmaceutical formulations can be recommended mainly for economic reasons, though the anhydrous and non-hygroscopic nature of crystalline DIMEB might be of particular advantage in case of moisture sensitive formulations.     

Scanning Probe Microscopy beyond Imaging: A General Tool for Quantitative Analysis

A simple, fast and general approach for quantitative analysis of scanning probe microscopy (SPM) images is reported. As a proof of concept it is used to determine with a high degree of precision the value of observables such as 1) the height, 2) the flowing current and 3) the corresponding surface potential (SP) of flat nanostructures such as gold electrodes, organic semiconductor architectures and graphenic sheets. Despite histogram analysis, or frequency count (Fc), being the most common mathematical tool used to analyse SPM images, the analytical approach is still lacking. By using the mathematical relationship between Fc and the collected data, the proposed method allows quantitative information on observable values close to the noise level to be gained. For instance, the thickness of nanostructures deposited on very rough substrates can be quantified, and this makes it possible to distinguish the contribution of an adsorbed nanostructure from that of the underlying substrate. Being non‐numerical, this versatile analytical approach is a useful and general tool for quantitative analysis of the Fc that enables all signals acquired and recorded by an SPM data array to be studied with high precision.     

Equilibrium Topology and Partial Inversion of Janus Drops: A Numerical Analysis

The equilibrium topology of an aqueous Janus emulsion of two oils, O1 and O2, with water, W, [(O1+O2)/W], is numerically evaluated with the following realistic interfacial tensions (γ): γ_O2/W=5 mN m⁻¹, γ_O1/O2=1 mN m⁻¹, and γ_O1/W varies within the range 4–5 mN m⁻¹, which is the limiting range for stable Janus drop topology. The relative significance of the two independently pivotal factors for the topology is evaluated, that is, the local equilibrium at the line of contact between the three liquids and the volume fraction of the two dispersed liquids within the drop. The results reveal a dominant effect of the local equilibrium on the fraction of the O2 drop surface that is covered by O1. In contrast, for a constant volume of O2, the impact of the interfacial tension balance on the limit of the coverage is modest for an infinite volume of O1. Interestingly, when the O1 volume exceeds this value, an emulsion inversion occurs, and the O1 portion of the (O1+O2)/W topology becomes a continuous phase, generating a (W+O2)/O1 Janus configuration.     

Chlorine‐Enhanced Surface Mobility of Au(100)

Motivated by experimental studies of two‐dimensional Ostwald ripening on Au(100) electrodes in chlorine‐containing electrolytes, we have studied diffusion processes using density functional theory. We find that chlorine has a propensity to temporary form AuCl complexes, which diffuse significantly faster than gold adatoms. With and without chlorine, the lowest activation energy is found for the exchange mechanism. Chlorine furthermore reduces the activation energy for the detachment from kink sites. Kinetic Monte Carlo simulations were performed on the basis of extensive density functional theory calculations. The island‐decay rate obtained from these Monte Carlo simulations, as well as the decay rate obtained from the theoretical activation energies and frequency factors when inserted into analytical solutions for Ostwald ripening, are in agreement with experimental island‐decay rates in chlorine‐containing electrolytes.     

Temperature-Dependent Surface-Enrichment Effects of Imidazolium-Based Ionic Liquids

We present the first systematic study of the influence of temperature on the degree of surface enrichment of 1-alkyl-3-methylimidazolium-based ionic liquids (ILs). Using angle-resolved X-ray photoelectron spectroscopy, we demonstrate that the degree of surface enrichment strongly decreases with increasing temperature for all the studied ILs. For ILs with the same cation, but different anions, [C₈C₁Im]Br, [C₈C₁Im][TfO] and [C₈C₁Im][Tf₂N], no significant differences of the temperature-induced partial loss of surface enrichment are found. Measurements for [C₄C₁Im][TfO], [C₈C₁Im][TfO] and [C₁₈C₁Im][TfO] indicate a small effect of the chain length. For [C₁₈C₁Im][TfO], a continuous decrease of alkyl surface enrichment is found with increasing temperature, with no abrupt changes at the phase-transition temperature from the smectic A to the isotropic phase, indicating that the surface enrichment is not affected by this phase transition.     

Ion‐Transfer Electrochemistry of Rat Amylin at the Water–Organogel Microinterface Array and Its Selective Detection in a Protein Mixture

The behavior of proteins and polypeptides at electrified aqueous–organic interfaces is of benefit in label‐free detection strategies. In this work, rat amylin (or islet amyloid polypeptide) was studied at the interface formed between aqueous liquid and gelled organic phases. Amylin is a polypeptide that is co‐secreted with insulin from islet beta‐cells and is implicated in fibril formation. In this study, rat amylin was used, which does not undergo aggregation. The polypeptide underwent an interfacial transfer process, from water to the gelled organic phase, under applied potential stimulation. Cyclic voltammetry revealed steady‐state forward and peak‐shaped reverse voltammograms, which were consistent with diffusion‐controlled water‐to‐organic transfer and thin‐film stripping or desorptive back‐transfer. The diffusion‐controlled forward current was greater when amylin was present in an acidic aqueous phase than when it was present in an aqueous phase at physiological pH; this reflects the greater charge on the polypeptide under acidic conditions. The amylin transfer current was concentration dependent over the range 2–10 μM , at both acidic and physiological pH. At physiological pH, amylin was selectively detected in the presence of a protein mixture, which illustrated the bioanalytical possibilities for this electrochemical behavior.     

Substrate interaction effects on order to disorder transition behavior in block copolymer films

We present an overview of the recent progress on the phase transition in the block copolymer (BCP) films in terms of the interfacial interactions effects of the substrates and the χ (Flory-Huggins segmental interaction parameter) effects between the two blocks. For the BCP films thinner than a critical thickness (L_c) above which the transition is independent of film thickness, the order-to-disorder transition (ODT) increased or decreased with decreasing film thickness depending on the interfacial interaction types. The rapid and slow changes in the ODT were attributed to the relative magnitude of enthalpic contribution to χ between two blocks. Interestingly, a periodic amplification in the block composition for the BCP films suppressed the compositional fluctuation in the film geometry, resulting in the ODT shifts from the bulk ODTs above L_c. This effect of the BCP films was more illustrated by the ODT shift effects depending on the strength of the preferential interactions on the substrates. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Phenylethenyl‐Substituted Triphenylamines: Efficient,Easily Obtainable,and Inexpensive Hole‐Transporting Materials

Star‐shaped charge‐transporting materials with a triphenylamine (TPA) core and various phenylethenyl side arm(s) were obtained in a one‐step synthetic procedure from commercially available and relatively inexpensive starting materials. Crystallinity, glass‐transition temperature, size of the π‐conjugated system, energy levels, and the way molecules pack in the solid state can be significantly influenced by variation of the structure of these side arm(s). An increase in the number of phenylethenyl side arms was found to hinder intramolecular motions of the TPA core, and thereby provide significant enhancement of the fluorescence quantum yield of the TPA derivatives in solution. On the other hand, a larger number of side arms facilitated exciton migration through the dense side‐arm network formed in the solid state and, thus, considerably reduces fluorescence efficiency by migration‐assisted nonradiative relaxation. This dense network enables charges to move more rapidly through the hole‐transport material layer, which results in very good charge drift mobility (μ up to 0.017 cm² V ^?1 s^?1).     

结晶高分子非晶区的结构及其动力学行为研究进展

非晶结构对结晶高分子材料结构和最终使用性能有非常重要的影响,但目前对半晶高分子中非晶结构的认识还不太清晰并且有待进一步完善.随着研究手段的发展,结晶高分子中非晶区结构及其动力学行为的研究受到越来越多的关注.本文简要概述了目前对结晶高分子中非晶相的研究进展,主要从结晶高分子中非晶区的结构﹑结晶高分子中非晶区的松弛行为﹑非晶相对结晶高分子性能的影响以及等温结晶过程中非晶相的结构演化这四个方面进行介绍,并对它们的研究现状进行了概述,同时指出了目前在这方面研究中存在的争议和问题.     

Interface structure and misfit relaxation in YBa2Cu3O7‐δ/PrBa2Cu3O7‐δ heterostructures on SrTiO3(001) substrates

Structural properties of YBa₂Cu₃O_7‐δ/PrBa₂Cu₃O_7‐δ heterointerfaces have been investigated by aberration‐corrected electron microscopy. Experimental evidence shows that c‐axis‐oriented YBa₂Cu₃O_7‐δ/PrBa₂Cu₃O_7‐δ heterostructures with atomically sharp interface epitaxially grow on SrTiO₃(001) substrates. In terms of the contrast analysis, no apparent interdiffusion between YBa₂Cu₃O_7‐δ and PrBa₂Cu₃O_7‐δ occurs at the interface. In addition, stand‐off misfit dislocations and planar faults appear within PrBa₂Cu₃O_7‐δ layer near the interface. Both misfit dislocations and interfacial dislocations resulting from the termination of planar faults contribute to misfit relaxation at the YBa₂Cu₃O_7‐δ/PrBa₂Cu₃O_7‐δ interface. The defect configuration of planar faults and stand‐off misfit dislocations is explored. Copyright © 2013 John Wiley & Sons, Ltd.