锆系Laves相储氢合金电极的性能研究

Ｚｒ（Ｖ０．２Ｍｎ０．２Ｍｏ０．０６Ｎｉ０．５４）２．４合金经ＨＦ溶液处理后，合金表面由富Ｚｒ和富Ｍｎ层转变成富Ｎｉ层，从而使电极初期活化周期明显缩短，电极表面氢吸附性能改善。表面反应电阻减小。本文探讨了上述电极表面反应机理，即表面Ｎｉ的催化、氢吸附和氢转移机理，对阻抗谱进行拟合，给出了相应的电极反应等效电路。     

碱性电镀光亮锌镍合金研究

在总结镀液的电化学特性和锌镍合金镀层的晶体结构与性能等实验结果的基础上,提出碱性电镀光亮锌镍合金的工艺规范和直接把锌酸盐镀锌液转化为碱性电镀光亮锌镍合金镀液的方法。生产实践证明,该工艺稳定,镀层光亮、耐腐性好、硬度较高、无氢脆,镍含量可在９～２０ｗｔ％范围内随意控制。     

非晶态Fe－W合金镀层的表面改性

将Ｆｅ－Ｗ非晶态镀层在铬酸盐钝化液中进行化学钝化与电化学钝化，使之形成含铬钝化膜。阳极极化曲线说明，钝化后镀层的孔蚀电位向正向移动了约１．６８Ｖ；Ｆｅ－Ｗ非晶镀层在氯化钠溶液中浸泡近１ｈ表面发生严重腐蚀，而经钝化处理的镀层浸泡１个月，表面无变化，仍具有金属光泽。     

镧与镍共沉积的研究

由于含稀土的合金新材料具有多种特殊功能，因此，其制备技术已为人们所关注．制备含稀土合金的方法有高温烧结法、真空蒸发法、离子溅射法及电化学法等．其中电化学法设备简单，容易获得不同组份的表层材料，但是，由于稀土元素的电位很负，从电解质水溶液中沉积稀土及其合金是相当困难的，以往曾有采用熔融盐电解质或非水电解质制备稀土合金的一些报导[1，2]，而从电解质水溶液中电沉积稀土合金的报导甚少．本研究采用适宜的络合剂，实现了从电解质水溶液中电沉积Ni－La合金，镀层中钠含量最高达22．58％（质量分数，下同）．通过XPS及…     

铝镁混合金属氢氧化物溶胶阴离子交换性能研究

本文研究了电解质对铝镁混合金属氢氧化物（Ａｌ－ＭｇＭＭＨ）溶胶粒子中Ｃｌ－和ＯＨ－的阴离子交换性能。在所研究的电解质ＮａＮＯ３，ＨＣＯＯＮａ，ＣＨ３ＣＯＯＮａ，Ｎａ２ＣＯ３，Ｎａ２ＳＯ４和Ｎａ３ＰＯ４中，发现高价阴离子的交换能力大于低价阴离子的交换能力，无机阴离子的交换能力大于有机阴离子的交换能力。所研究Ａｌ－ＭｇＭＭＨ溶胶粒子的阴离子交换容量为２．８２ｍｍｏｌ／ｇ，比粘土粒子的阳离子交换容量大得多。     

ESR study of electron interaction in a Tc/Al2O3 system

An investigation was made into the nature of paramagnetic centers in a Tc/Al₂O₃ system under varying conditions as to heat treatment and technetium content, and in O₂ and CO adsorption environments. It was found that in the case of reduction at 573 K Tc²⁺ ions and, conceivably, other ionic forms developed and stabilized on the carrier surface. After reduction at 973 K two types of electron center appeared, whose concentration increased as reduction was prolonged. Signals were observed in the low fields (3–20 mT) of the ESR spectra having g₁ 13.5 and g₂>30, which could be assigned to free charge carriers in a cluster of metal atoms or ions. Adsorption of O₂ at 300 K caused O ₂ ^– ion radicals to form on the surface of the reduced Tc/Al₂O₃ samples, both electron centers and technetium ions constituting the electron donors. In the case of CO adsorption paramagnetic (CO) ₂ ^– particles appeared on the Tc/Al₂O₃ samples after prolonged exposure. On reaction with O₂ two types of O ₂ ^– ion-radical with differing thermal stability were formed.Institute of Physical Chemistry, Russian Academy of Sciences, Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 9, pp. 1972–1978, September, 1992.     

密度泛函理论研究CO和 O2在NiFeB2/TiO2表面的吸附

 运用密度泛函理论中广义梯度近似的 PW91 方法结合周期平板模型, 研究了 NiFeB2 合金簇在 TiO2(110) 面的吸附模式. 结果表明, NiFeB2 平行吸附在 TiO2 面的 Ot-Ot 位最稳定, 吸附能为 526.4 kJ/mol. 为了探明 NiFeB2/TiO2 是否具有催化氧化 CO 活性, 进一步研究了 CO 和 O2 在 NiFeB2/TiO2 面的共吸附行为. 结果表明, CO 和 O2 以 Eley-Rideal 机理共吸附在 Fe 上时, 易形成碳酸盐, 而以 Langmuir-Hinshelwood 机理共吸附在 Fe 上时, O2 发生分解, 与 Fe, Ni 和 B 形成稳定的六元环.     

3,5-Bis(2-hydroxyphenyl)-1<Emphasis Type="Italic">H</Emphasis>-1,2,4-triazole based ligands — protonation and metal complex formation

3,5-Bis(2-hydroxyphenyl)-1H-1,2,4-triazole (H₂L^a) and 4-[3,5-bis(2-hydroxyphenyl)-1H-1,2,4-triazol-1-yl]benzoic acid (H₃L^b) have been prepared, and crystal structure of the intermediate 2-(2-hydroxyphenyl)-4H-1,3-benzoxazin-4-one has been determined. Temperature dependent ¹H NMR spectroscopic measurements of H₂L^a indicated dynamic behavior with the equilibrium between the two asymmetric tautomers. For H₃L^b, pD-dependent ¹H NMR spectroscopic measurements showed small but characteristic shifts in the range of 0 ≤ pD ≤ 1, indicative of a triazole nitrogen atom protonation; the corresponding pK _a of 0.98 ± 0.04 was determined by spectrophotometric titrations. (H₂O, 26°C, 1 M KCl/HCl). Formation of [Fe^III(L^a)]⁺ (pH 2.5) and [Fe^III(L^a)₂]⁻ (pH > 6) was verified by UV-Vis spectroscopy. Complex formation of H₃L^b with Al³⁺ and VO²⁺ was investigated by ¹H NMR spectroscopic titration and cyclic voltammetry, respectively. Single crystals of the phenoxo bridged [V^VO(HL^b)(EtO)]₂·2EtOH were characterized by X-ray structural analysis. Dedicated to Professor Milan Melník on the occasion of his 70th birthday     

一步阳极氧化法制备超亲水氧化铝

本文应用一步阳极氧化法在铝表面制作纳米粗糙结构的超亲水表面.考察控槽压、控电流及氧化时间对氧化铝表面超亲水性的影响.测试表明,控电流法更有利于制作超亲水表面,增大电流密度可缩短氧化时间,该法可制作稳定性好、机械强度高的超亲水氧化铝表面,富有潜在的应用价值.     

乙醇水汽重整制氢反应中钯铜合金膜的透氢性能

 采用真空化学镀技术制备了厚度较薄的具有 fcc 结构的 Pd0.9Cu0.1/Al2O3 合金复合膜, 在 250~500 °C, 160~310 kPa 的乙醇水汽重整制氢模拟反应条件下, 考察了不同醇/水比的 H2-Ar-C2H5OH-H2O 混合气体系中该膜的透氢性能. 结果表明, 乙醇和水的存在均相同程度地降低了膜的透氢性能, 但测试条件下 Pd-Cu 合金膜仍保持完整的膜致密性和稳定的相结构. 在 500 °C, 310 kPa, H2-Ar-C2H5OH-H2O (H2:Ar:(C2H5OH+H2O) 体积比为 60:30:10) 混合气中, 膜的最大透氢量为 11.3 m3/(m2?h), H2 回收率大于 62.5%. Pd-Cu 合金膜在乙醇水汽重整制氢反应中具有潜在的应用前景.