Crystal Structures and Electrochemical Properties of R1.5Ca1.5MgNi14(R=Nd,Gd and Er)Hydrogen Storage Alloys

Ca₃MgNi₁₄, Nd_1.5Ca_1.5MgNi₁₄, Gd_1.5Ca_1.5MgNi₁₄ and Er_1.5Ca_1.5MgNi₁₄ alloys were prepared by high frequency induction melting and sintering. Characterization and analysis were performed by X-ray diffraction/Rietveld full-spectrum fitting, gaseous P-C-T hydrogen storage test and electrochemical properties tests. It can be found that all alloys consist of Gd₂Co₇-type 3R phase and Ce₂Ni₇-type 2H phase. Although the hydrogen storage capacities of Nd_1.5Ca_1.5MgNi₁₄, Gd_1.5Ca_1.5MgNi₁₄ and Er_1.5Ca_1.5MgNi₁₄ decrease to some extent compared to that of Ca₃MgNi₁₄, their equilibrium pressures for absorption and desorption increase markedly. Moreover, R_1.5Ca_1.5MgNi₁₄ alloys have better cycling stabilities and high-rate discharge(HRD) properties as compared to Ca₃MgNi₁₄. The hydrogen diffusion in alloy electrodes is the main factor to influence the HRD performance.     

含铜三元类水滑石化合物的合成及其性质

 以Cu（NO3）2，Zn（NO3）2和Al（NO3）3为原料，以NaOH为沉淀剂，利用共沉淀法合成了含铜三元类水滑石化合物CuZnAl－HTLcs．从不同Cu／Zn／Al比的混合原料溶液的滴定曲线入手，详细探讨了溶液pH值、原料加入方式、组分配比及水热处理条件对类水滑石合成的影响，利用XRD，ICP及比表面积测定对合成物进行了表征，并以苯酚羟基化为探针反应评价了催化剂的催化性能．结果表明，在体系pH＝5．0～6．2，（Cu＋Zn）／Al摩尔比＝2．0，Cu／Zn摩尔比≤1．0及室温条件下共沉淀后，于100℃水热处理3h，即可得到晶相单一和结晶度高的CuZnAl－HTLcs．变化pH法合成的样品的相对结晶度为100％，低过饱和法为76．5％，高过饱和法为75．9％．合成的CuZnAl－HTLcs中Cu2＋的含量均比原料液中Cu2＋的含量有所增加，这可能是由于在pH＝5．8时Cu2＋对Al（OH）3的同晶取代能力比Zn2＋强．随着CuZnAl－HTLcs中Cu含量的增加，催化剂对苯酚羟化反应的催化活性逐渐增大．     

高分子合金分离膜材料及结构研究进展

膜材料液相共混制备高分子合金分离膜不但可以调节膜材料与被分离物的亲和性，也在一定程度上改变了膜的结构。本文介绍高分子材料浓相共混对膜材料的亲水性、耐污染性及其它理化性能的影响和对膜结构的调节作用，同时指出高分子材料间的相容性是影响合金膜结构的重要因素。     

低钴AB5型稀土系贮氢电极合金的研究

为了进一步降低AB5型混合稀土系贮氢合金的成本,采用Cr,Si,Cu替代Co和调节化学计量比的方法制备低钴AB5型贮氢合金。结果表明:3种取代元素在寿命方面的效果依次为Si>Cr>Cu,在放电容量和活化性能方面依次是Cu>Cr>Si。Cr,Cu,Si只有少量的替代才可能发挥其有利影响;通过非化学计量比的调节,低钴混合稀土系贮氢电极合金的放电容量、活化性能及倍率放电能力都能较好地达到实用要求,但是循环寿命有待提高。     

单一稀土Ce, La和混合稀土在工业纯铝中的作用

通过对比实验的方法，研究了稀土Ce，La和混合稀土对工业纯铝组织、电性能和机械性能的影响。结果表明：单一稀土La，Ce可降低工业纯铝的电阻率，提高工业纯铝的导电性，其中La的效果优于Ce．而混合稀土对电阻率几乎无影响；La，Ce和混合稀土均能减小工业纯铝的晶粒度，在其加入量为0．1％后细化效果明显，当其含量大于0．5％后细化效果趋于平缓，其中Ce的效果最佳，La次之，混合稀土最弱；单一稀土La，Ce在一定含量时可提高工业纯铝的σb6和δ，Ce的作用强于La，混合稀土对σb和δ的影响不明显。     

Al3Ti1B1RE细化剂对罐用铝材的细化效果及稀土的作用

采用XRD，OM，SEM，EDAX等探讨了一种新型Al3Ti1B1RE中间合金细化剂对罐用铝材的细化效果及RE的作用。结果表明，该细化剂对罐用铝材的细化效果优于进口和国产Al3Ti1B，且具有长效性，达6h后仍未见明显衰退，明显提高了该材料的强度和塑性；其细化效果及稳定性好的主要原因是：RE可降低铝液的表面能，增加铝液对细化核心(如TiAl3，TiB2)的润湿性，既充分发挥了异质形核作用，又防止了TiB2聚集沉淀倾向；RE也极易在结晶前沿富集造成成分过冷，阻碍了α-Al晶粒生长，并促进其在细化核心上形核；此外RE还兼有一定的净化、细化和变质作用，尤其是净化作用提高了该细化剂的冶金质量。     

色谱法分析环境中铝形态的进展

综述了色谱法在环境体系铝形态研究中的应用进展,比较了离子交换色谱、体积排阻色谱、反相高效液相色谱、快速蛋白质液相色谱、毛细管电泳以及流路中嵌入色谱小柱的流动注射分析法的优缺点。引用文献55篇。     

铁铬合金空蚀过程的研究

研究了4种铁铬合金在氯化钠溶液体系中的空泡腐蚀行为.重点考察合金性能及空泡作用区的相对面积对合金空蚀损失量的影响.结果表明:合金空蚀损失量随空泡作用区与非空泡作用区表面面积比的增大而增加;合金的耐蚀性和机械性能同时影响其空蚀损失量.     

Asymmetric reduction of acetophenone and propiophenone by NaAl(IPTOLate)H2 combined with enantiomeric enrichment of the reaction product as an inclusion complex with IPTOL

An improved procedure was developed for asymmetric reduction of acetophenone and propiophenone by the chiral reagent NaAl(IPTOLate)H₂. This procedure is based on isolation of the chiral alcohol that formed as a crystalline host—guest complex with the IPTOL ligand. The enantiomeric enrichment of the product was as high as 97% ee. The ability of IPTOL and its analogs to form host—guest complexes with a number of ether-type solvents, 1-phenylethanol, and 1-phenylpropan-1-ol as well as thermal stabilities of IPTOL-containing complexes with these alcohols were studied.     

3-Cyanopyridine-2(1H)-thiones and 3-cyano-2-(methylthio)pyridines in the synthesis of substituted 3-(aminomethyl)pyridines

The reactions of substituted 3-cyanopyridine-2(1H)-thiones and 3-cyano-2-(methylthio)pyridines with lithium aluminum hydride in anhydrous diethyl ether afforded the corresponding 3-aminomethyl derivatives, which were used in the synthesis of the corresponding amides.