TNF-α、IL-6、IL-8在Modic I型改变腰椎终板与椎间盘髓核中的表达及关系研究

目的 探讨腰椎Modic I型改变的腰椎终板与椎间盘髓核中TNF-α、IL-6、IL-8 的相关性。方法 收集30 例因下腰痛入院手术治疗并行腰椎MRI 检查确认为腰椎Modic I型改变患者的术中病灶椎间盘标本,进行免疫组化检测,并观察椎间盘组织病理变化及炎症因子的表达,IL-6、IL-8 相对表达水平以相对表达量△Ct 或（2-△Ct×104）进行分析。结果 Modic I型终板中TNF-α表达水平（9.2±0.7）高于髓核（7.2±0.5）,差异有统计学意义（P＜0.05）;髓核中△Ct IL-6、△Ct IL-8 相对表达量（6.34±1.82、10.62±1.88）高于终板（4.07±1.86、5.92±1.31）,差异均有统计学意义（均P＜0.05）。结论 Modic I型终板中TNF-α、IL-6、IL-8的表达水平明显高于髓核,其引起下腰痛的原因主要为终板的炎症改变。     

使用曲面微通道板和感应电荷位置灵敏阳极的软X射线-极紫外光子计数成像探测器研究

本项目对我国空间探测的极紫外(EUV)波段大视场相机所需求的球面光子计数成像探测器的关键技术进行了研究。首先,建立了光阴极材料次级电子产出模型,利用该模型计算了软X射线-EUV波段常用的光电阴极材料—碱卤化物的次级电子产出,分析了微通道板(MCP)的次级电子产出。建立了测量MCP量子探测效率的装置,并推导出MCP量子探测效率的计算公式,测量了MCP在软X射线-EUV波段的量子效率以及MCP量子效率随掠入射角的变化。其次,建立了球面实芯微通道板的制备装置,利用高温热成型方法制备出曲率半径为150 mm球面MCP,利用光刻技术制备出有效直径为48 mm的楔条形感应电荷位置灵敏阳极,在此基础上集成了一套使用球面MCP和感应电荷位置灵敏阳极的两维光子计数成像探测器。再次,研制出包括快速前端模拟电路与后续数字电路的成像读出电路,编制了能矫正图像畸变的图像实时采集和处理软件。最后,建立了MCP探测器空间分辨率、图像线性的检测装置,对研制出的探测器性能进行了检测,检测结果表明:探测器的各项技术指标完全满足要求。     

Influence of the molding angle on tensile properties of FDM parts with orthogonal layering

Fused deposition molding (FDM) is one of the most widely used three‐dimensional (3D) printing technologies. This paper explores the influence of the forming angle on the tensile properties of FDM specimens. Orthogonal layering details were studied through experiments, theory, and finite element simulations. The stiffness and strength of the specimens were analyzed using the classical laminated plate theory and the Tsai–Wu failure criterion. The experimental process was simulated using finite element simulations. Results show that it is feasible to predict the stiffness and strength of FDM specimens using classical laminated plate theory and the Tsai–Wu failure criterion. A molding angle of 45° leads to specimens with maximized tensile properties. Numerical simulations show that changing the molding angle changes the internal stress and deformation fields inside samples, leading to FDM samples with different mechanical properties due to the orthogonal layers at different molding angles.     

分布振子复合板的模态阻尼及多点激励下阻尼减振相关性

分布阻尼振子可拓宽结构减振频带,因此可将振子分布于板中以形成复合板（简称“分布振子复合板”）,进而实现较宽的减振频带．对于多点支撑处受到宽频非一致激励（例如在不同激励点处的激励频率、幅值与相位有差异）的分布振子复合板,目前还缺乏有效简便的优化控制指标．在作者之前的研究中,针对含分布振子的梁推导了基于模态应变能的模态阻尼计算理论,讨论了模态阻尼与单点激励下梁的减振效果的相关性,并应用于宽频减振设计优化．本文进一步将模态阻尼计算理论推广到分布振子复合板,并将研究从梁的单点激励扩展到板的多点非一致激励下的阻尼减振相关性．首先,在利用模态应变能法推导得到分布振子复合板的模态阻尼计算公式后,从理论上讨论了不同边界条件与模态阶次对计算结果的影响,以及计算理论的适用性．而后,进一步通过有限元参数分析了边界条件、频率比、模态阶次与质量比的影响．最后,通过算例分析了无振子板或分布振子复合板在四个激励点具有多种幅值与相位组合情况下的稳态响应．结果表明,推导的模态阻尼计算公式可正确预测不同边界条件下的模态阻尼,且理论预测的模态阻尼与基板的稳态平均加速度减小率、稳态峰值应变能减小率均有较高的相关性．     

Experimental investigation on the distribution uniformity and pressure drop of perforated plate distributors for the innovative spray-type packed bed thermal storage

As an innovative thermal energy technology, the spray-type packed bed has advantages of high efficiency and low cost. A liquid distributor is the key component for the spray-type packed bed for scattering heat-transfer liquid drops evenly. In this study, the distribution performance and pressure drop of the perforated plate distributors of different orifice diameters were studied experimentally. The experimental results indicate that orifice diameter has a greater effect on the distribution performance compared to flow rate. With an increase in flow rate, the flow pattern through the distributor changes from the uncovered drop to the covered drop and then to the jet flow. The covered drop pattern shows the best performance with a good distribution and a small pressure drop simultaneously, which is the design and optimization principle of the distributor for a spray-type packed bed.     

任意边界条件下双模量矩形薄板的弯曲

将双模量板等效为两个各向同性小矩形板组成的层合板,假定该层合板的中性面即为两个小矩形板的交界面。根据中性面上应力为零且薄板全厚度上应力的代数和为零,推导了双模量矩形薄板的中性面位置。本文采用严宗达提出的带补充项的双重正弦傅里叶级数通解,该通解可以适用于任意边界条件的矩形薄板且不需要叠加或者重新构造。联立边界条件和控制方程,求得通解中的待定系数并代入到通解中,即可得到任意边界条件下双模量矩形薄板的弯曲解析解。与有限元结果比较,本文结果符合工程精度要求。     

基于高斯混合模型的车辆字符识别算法

在基于统计方法的车牌字符识别算法中,为了更有效地描述车牌字符特征的类条件概率密度,提出了一种基于高斯混合模型(GMM)的识别方法.首先采用Gabor变换来提取车牌字符的特征参数,然后通过GMM来逼近字符特征的类条件概率密度分布,最后根据得到的类条件概率密度分布函数构造贝叶斯分类器.其中,GMM的参数估计采用EM算法.实验表明,这种方法具有良好的字符识别效果、较强的鲁棒性以及较大的应用价值.     

一种复杂车辆图像中的多车牌定位方法

针对复杂背景中多个车牌的定位问题,提出一种新的定位方法.该方法综合利用边缘检测、连通域分析、倾斜矫正等多种方法,解决了复杂背景中定位难的问题.能够准确定位杂乱背景中的车牌,对天气、光照变化、车牌在图像中的移动和旋转等,具有良好的适应能力.该方法为后续的字符分割和字符识别提供旋转角度、字符区域定位信息.     

ANALYTICAL EVALUATION OF PERMANENT DEFLECTION OF A THIN CIRCULAR PLATE STRUCK NORMALLY AT ITS CENTER BY A PROJECTILE

The permanent deflection of a thin circular plate struck normally at its center by a projectile is studied by an approximate theoretical analysis,FEM simulation and experiment.The plate made of rate sensitive and strain-hardening material undergoes serious local deformation but is not perforated during the impact.The theoretical analysis is based on an energy approach, in which the Cowper-Symonds equation is used for the consideration of strain rate sensitive effects and the parameters involved are determined with the aid of experimental data.The maximum permanent deflections predicted by the theoretical model are compared with those of FEM sim- ulation and published papers obtained both by theory and experiment,and good agreement is achieved for a wide range of thickness of the plates and initial impact velocities.     

非保守力下温度场中FGM圆板的非线性力学行为

研究了温度场中非保守功能梯度材料(FGM)圆板的非线性力学行为.基于经典板理论,推导了受非保守力作用的FGM圆板在温度场中的控制微分方程.采用打靶法分析了由陶瓷二氧化锆和金属钛合金两相材料组成的非保守FGM圆板在均匀和非均匀升温场中的非线性力学行为.给出了不同均匀升温和非均匀升温场下,FGM圆板在非保守载荷作用下的平衡...