Toward Fuzzy Optimization without Mathematical Ambiguity

Fuzzy programming has been discussed widely in literature and applied in such various disciplines as operations research, economic management, business administration, and engineering. The main purpose of this paper is to present a brief review on fuzzy programming models, and classify them into three broad classes: expected value model, chance-constrained programming and dependent-chance programming. In order to solve general fuzzy programming models, a hybrid intelligent algorithm is also documented. Finally, some related topics are discussed.     

Lower Bounds from State Space Relaxations for Concave Cost Network Flow Problems

In this paper we obtain Lower Bounds (LBs) to concave cost network flow problems. The LBs are derived from state space relaxations of a dynamic programming formulation, which involve the use of non-injective mapping functions guaranteing a reduction on the cardinality of the state space. The general state space relaxation procedure is extended to address problems involving transitions that go across several stages, as is the case of network flow problems. Applications for these LBs include: estimation of the quality of heuristic solutions; local search methods that use information of the LB solution structure to find initial solutions to restart the search (Fontes et al., 2003, Networks, 41, 221–228); and branch-and-bound (BB) methods having as a bounding procedure a modified version of the LB algorithm developed here, (see Fontes et al., 2005a). These LBs are iteratively improved by penalizing, in a Lagrangian fashion, customers not exactly satisfied or by performing state space modifications. Both the penalties and the state space are updated by using the subgradient method. Additional constraints are developed to improve further the LBs by reducing the searchable space. The computational results provided show that very good bounds can be obtained for concave cost network flow problems, particularly for fixed-charge problems.     

基于BOOSt结构下不连续导电模式的PFC电路

采用现代高频功率变换技术的有源功率因数校正（Power Factor Corrector,PFC)技术是解决高频开关变换器谐波污染的有效手段。与传统的PFC电路相比，有源PFC电路的输入电流接近正弦波且与输与电压同相位，能有效抑制电流波形畸变和谐波，因此避免了对同一电网设施的干扰。在PFC电路中，Boost变换器是研究和应用得最多的一种变换器。本文着重分析了Boost电路在不连续导电模式状态下，PFC电路的临界条件，对实际电路结构的设计有很好的指导意义。     

低潮时期宽带网建设需要注意的问题

宽带建设低潮期实际上是一次优胜劣汰的过程,宽带运营竞争的手段将由低价竞争转向服务质量和特色的竞争。应在重视宽带接入建设的同时,也要重视业务运营管理平台的建设。应从长远考虑,不应仅为了节省投资而降低对设备的要求。由于降低成本的主要方向是在线缆部分,因此EVDSL技术应用的速度将大大超过人们的预期。在网络建设上,IPDSLAM虽有优势但也有不足,还需要进一步的成熟、稳定和实践的检验。     

Active long pulse shaping technique of pulsed CO2 laser using multi-pulse discharge control

We describe the pulse forming of pulsed CO₂ laser using multi-pulse superposition technique. Various pulse shapes, high duty cycle pulse forming network (PFN) are constructed by time sequence. This study shows a technology that makes it possible to make various long pulse shapes by activating SCRs of three PFN modules consecutively at a desirable delay time with the aid of a PIC one-chip microprocessor. The power supply for this experiment consists of three PFN modules. Each PFN module uses a capacitor, a pulse forming inductor, a SCR, a high voltage pulse transformer, and a bridge rectifier on each transformer secondary. The PFN modules operate at low voltage by driving the primary of HV pulse transformer. The secondary of the transformer has a full-wave rectifier, which passes the pulse energy to the load in a continuous sequence.We investigated various long pulse shapes as different trigger time intervals of SCRs among three PFN modules. As a result, we could obtain laser beam with various pulse shapes and durations from about 250 to 1000 μs.     

VLSI Implementation of Forward Error Control Technique for ATM Networks

In asynchronous transfer mode (ATM) networks, fixed length cells of 53 bytes are transmitted. A cell may be discarded during transmission due to buffer overflow or a detection of errors. Cell discarding seriously degrades transmission quality. The quality degradation can be reduced by employing efficient forward error control (FEC) to recover discarded cells. In this paper, we present the design and implementation of decoding equipment for FEC in ATM networks based on a single parity check (SPC) product code using very‐large‐scale integration (VLSI) technology. FEC allows the destination to reconstruct missing data cells by using redundant parity cells that the source adds to each block of data cells. The functionality of the design has been tested using the Model Sim 5.7cXE Simulation Package. The design has been implemented for a 5 ° 5 matrix of data cells in a Virtex‐E XCV 3200E FG1156 device. The simulation and synthesis results show that the decoding function can be completed in 81 clock cycles with an optimum clock of 56.8 MHz. A test bench was written to study the performance of the decoder, and the results are presented.     

New FIR laser lines and frequency measurements for optically pumped CD3OH

Twenty new cw FIR laser lines in CD₃OH, optically pumped by a CO₂ laser, are reported. The frequencies of 39 of the stronger laser lines were measured relative to stabilized CO₂ lasers with a fractional uncertainty, as determined by the reproducibility of the FIR frequency itself, of 2 parts in 10⁷.Contribution of the U.S. Government, not subject to copyright.     

基于双因子认证技术的网络身份识别

本文提出了一种基于动态双因子认证技术的网络身份识别方法,用户每次登录的口令是利用系统时间和用户ID通过MD5加密算法计算得到,其通过MD5加密后生成的登录口令是随机的,这将进一步提高开放网络环境下身份识别的可靠性和安全性。同时,本文还提出网络身份识别技术可以应用到各类网站的服务器上,用来完成对用户身份的识别,以提高网络系统的安全性。     

数据通信网综合网管的设计分析

结合TMN电信管理网的体系结构．对数据通信网综合网管的结构和功能进行了分析。     

软交换技术的发展及其应用

软交换是下一代网络NGN的核心技术，本文从软交换的概念入手，介绍了软交换的基本功能及其优点．软交换的网络系统结构、软交换的对外接口等内容，并探讨了软交换技术的应用。