Synthesis and characterization of new optically active poly(amide‐imide)s containing epiclon and L‐methionine moieties in the main chain

Epiclon [3a,4,5,7a‐tetrahydro‐7‐methyl‐5‐(tetrahydro‐2,5‐dioxo‐3‐furanyl)‐1,3‐isobenzofurandione] (1) was reacted with L ‐methionine (2) in acetic acid and the resulting imide‐acid 3 was obtained in high yield. The diacid chloride 4 was prepared from diacid derivative 3 by reaction with thionyl chloride. Thermostable poly(amide‐imide)s containing epiclon structure were synthesized by reacting of diacid chloride 4 with various aromatic diamines. Polymerization reaction was performed by two conventional methods: low temperature solution polycondensation and short period reflux conditions. In order to compare conventional solution polycondensation reaction methods with microwave‐assisted polycondensation, the reactions were also carried out under microwave conditions with a small amount of o‐cresol that acts as a primary microwave absorber. The reaction mixture was irradiated for 6 min with 100% radiation power. Several new optically active poly(amide‐imide)s with inherent viscosity ranging from 0.15 to 0.36 dl/g were obtained with high yield. All of the above polymers were fully characterized by ¹H‐NMR, FT‐IR, elemental analyses and specific rotation techniques. Some structural characterizations and physical properties of these new optically active poly(amide‐imide)s are reported. Copyright © 2005 John Wiley & Sons, Ltd.     

Doped Sol-Gel Films for Silica-on-Silicon Photonic Components

Further expansion of optical communication systems depends strongly on the development of cheap component technologies for functions such as switching, demultiplexing and amplification. Silica-on-silicon is increasingly recognised as the best approach to low cost integrated optics for such applications, but so far the functionality is limited. The purpose of NODES, a basic research collaboration sponsored by the European Union under the programme ESPRIT, has been to examine the application of sol-gel to a highly functional silica-on-silicon technology. In particular, the project has investigated film processing and characterisation, rare-earth doping for amplification, and semiconductor nanocrystallite doping for nonlinear functions. This paper presents the background and context to this work, summarises the technical results obtained, and discusses requirements and challenges for successful application of sol-gel in photonics.     

基于主被动合作博弈的医患关系研究

针对我国医患关系日趋紧张,医患矛盾逐渐凸显这一问题,在对中国近五年医患事件进行分析的基础上,分别从信任程度、信息不对称程度、诊疗代价等多个视角出发,利用演化博弈理论和复制动态方程,构建了医患双方合作策略选择演化博弈模型,探究了影响医患关系演化的相关因素。研究表明:从长期来看,医患关系博弈系统存在两种演化路径:主动合作和被动合作;增大医患双方的信任程度,减小医患双方的信息不对称程度,降低医患双方合作成本,增大以政府为主导的仲裁机构对医患双方的奖励和惩罚都将会促使医患双方由被动合作转向主动合作。     

一种应用于5G毫米波通信的双极化有源相控阵模组

针对5G毫米波通信,研制了一种双极化有源相控阵天线模组。厚度为2 mm的多层PCB正面印制阵列天线,在其背面集成多通道波束成形芯片,通过中间层实现天线与芯片的互连以及供电、控制等。测试结果表明,研制的板状4×4双极化相控阵模组在E面和H面均实现了不小于±40度的波束扫描范围（不大于3 dB的电平下降）和低于-18 dB的归一化交叉极化电平,在24～27.5 GHz的频率范围内实现了V极化和H极化分别为42.6～45.7 dBm和43.5～46.1 dBm的等效全向辐射功率（EIRP）。     

Single-Atom Metal Sites Anchored Hydrogen-Bonded Organic Frameworks for Superior “Two-In-One” Photocatalytic Reaction

Photoredox catalysis is a green solution for organics transformation and CO₂ conversion into valuable fuels, meeting the challenges of sustainable energy and environmental concerns. However, the regulation of single-atomic active sites in organic framework not only influences the photoredox performance, but also limits the understanding of the relationship for photocatalytic selective organic conversion with CO₂ valorization into one reaction system. As a prototype, different single-atomic metal (M) sites (M²⁺ = Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺) in hydrogen-bonded organic frameworks (M-HOF) backbone with bridging structure of metal-nitrogen are constructed by a typical “two-in-one” strategy for superior photocatalytic C N coupling reactions integrated with CO₂ valorization. Remarkably, Zn-HOF achieves 100% conversion of benzylamine oxidative coupling reactions, 91% selectivity of N-benzylidenebenzylamine and CO₂ conversion in one photoredox cycle. From X-ray absorption fine structure analysis and density functional theory calculations, the superior photocatalytic performance is attributed to synergic effect of atomically dispersed metal sites and HOF host, decreasing the reaction energy barriers, enhancing CO₂ adsorption and forming benzylcarbamic acid intermediate to promote the redox recycle. This work not only affords the rational design strategy of single-atom active sites in functional HOF, but also facilitates the fundamental insights upon the mechanism of versatile photoredox coupling reaction systems.     

Aperture-Adjustable and Repairable Metal-Based MOFs Catalysis Membrane for Water Purification

Precise adjustment of the pore size, damage repair, and efficient cleaning is all challenges for the wider application of inorganic membranes. This study reports a simple strategy of combining dry-wet spinning and electrosynthesis to fabricate stainless-steel metal–organic framework composite membranes characterized by customizable pore sizes, targeted reparability, and high catalytic activity for membrane cleaning. The membrane pore size can be precisely customized in the range of 14–212 nm at nanoscale, and damaged membranes can be repaired by targeted treatment in 120 s. In addition, advanced oxidation processes can be used to quickly clean the membrane and achieve 98% flux recovery. The synergistic actions of the membrane matrix and the selective layer increase the adsorption energy of active sites to oxidant, shorten the electron transfer cycle, and enhance the overall catalytic performance. This study can provide a new direction for the development of advanced membranes for water purification and high-efficiency membrane cleaning methods.     

Light Controlled Biohybrid Microbots

Biohybrid microbots integrate biological actuators and sensors into synthetic chassis with the aim of providing the building blocks of next-generation micro-robotics. One of the main challenges is the development of self-assembled systems with consistent behavior and such that they can be controlled independently to perform complex tasks. Herein, it is shown that, using light-driven bacteria as propellers, 3D printed microbots can be steered by unbalancing light intensity over different microbot parts. An optimal feedback loop is designed in which a central computer projects onto each microbot a tailor-made light pattern, calculated from its position and orientation. In this way, multiple microbots can be independently guided through a series of spatially distributed checkpoints. By exploiting a natural light-driven proton pump, these bio-hybrid microbots are able to extract mechanical energy from light with such high efficiency that, in principle, hundreds of these systems can be controlled simultaneously with a total optical power of just a few milliwatts.     

Solid Solvation Assisted Electrical Doping Conserves High-Performance in 500 nm Active Layer Organic Solar Cells

Organic solar cells (OSCs) process fascinating solution-printing capability to achieve low-cost and large-scale manufacture. However, the rapid power conversion efficiency (PCE) decay with active layer thickness enlargement inhibits the implement of OSCs’ potential advantages. To overcome the bottlenecks of PCE decay in thick active layer OSCs, the electrical doping with componential selectivity in bulk heterojunction (BHJ) film is achieved by introducing a solid solvation additive. Benefiting from the higher exciton splitting efficiency together with the longer drift (L_dr) and diffusion (L_diff) lengths, an OSC with 100 nm BHJ film demonstrates a PCE increment from 16.44% to 18.24% with prolonged dark and illuminated storage stabilities. Applying the solid solvation assisted (SSA) doping method in the OSCs with 500 nm active layer, the PCE significantly increases by 31.9%, from the original value of 11.79% to 15.55%. It further improves to 15.84% in a ternary blend thick-film device, which is the record value to the best of our knowledge. Besides, the SSA doping narrows the PCE gap between the 0.04 and 1 cm² devices. All improvements demonstrate the great potential of SSA doping for OSC commercial manufacture, since it optimizes the photovoltaic performance under all practical conditions of long-term, thick-film, and large-area.     

一种6~18 GHz宽带高精度有源移相器

设计了一种6 bit 6~18 GHz工作频段的宽带高精度有源移相器。片上集成了输入无源巴伦、逻辑编码器、RC多相滤波器、矢量合成单元、数控单元等。该移相器的设计采用55 nm CMOS工艺实现,芯片尺寸为1.29 mm×0.9 mm,移相器核心尺寸为1.02 mm×0.58 mm。后仿结果表明,在6~18 GHz频率范围内,增益误差RMS值小于1 dB,相位误差RMS值小于0.75°,输入回波损耗、输出回波损耗分别小于-8.5 dB、-8.9 dB,芯片总功耗为20.7 mW。该6 bit移相器的相对带宽为100%,覆盖C、X和Ku波段,适用于雷达探测等领域。     

Enantioselective synthesis of hydroxy-substituted α-methyl-α-amino acids using Al and Mn derivatives of cyclo-(L-Ala-L-AIa) bis-Iactim ethers

Aluminum and manganese derivatives of lithiated bis-lactim ethers of cyclo-(L-Ala-L-Ala) were used for the enantioselective synthesis of -hydroxy and polyhydroxy -amino acids of the 2-methyIserine series. A new variant of the synthesis of these acids via 3-acyl-2, 5-dialkoxy-3, 6-dimethyl-3, 6-dihydropyrazines is proposed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 590–595, March, 1993.