The absence of physical-aging effects on the surface relaxations of rubbed polystyrene

Extensive experimental results are presented to reveal the relaxations of polystyrene surface deformed by rubbing with a velvet cloth. We found that surface topographic features, such as ditches and ridges created by rubbing, relax at temperatures at about 20^° C below the bulk glass transition temperature of the polystyrene for a molecular weight of 442 kg/mol, even though we estimate the Laplace Pressure driving the relaxation to be 1/500 of the yield limit. The relaxation is independent of the thermal history before the rubbing process, and post rubbing thermal history below 55^° C . In other words, physical-aging processes at 23^° C for up to 7 days and at 50^° C for 2 days, which would have drastic effects on the relaxations of bulk polymers, have little effects on the relaxations of rubbed surfaces. This is consistent with the mobility enhancement in the surface layer previously reported in the literature.     

Influence of radiation damage on lattice vibration parameters in crystalline and vitreous SiO2

The influence of radiation damage on a number of lattice vibration parameters in two SiO₂ modifications was investigated using IR reflectance spectroscopy. The radiation kinetics of changes in spectral characteristics of SiO₂ fundamental vibrations in crystalline and glassy states were determined. The reflectivity coefficient and the frequency of degenerate vibrations as functions of dose showed minima, the locations of which were governed by the type of sample. At high neutron irradiation doses (10²¹ cm⁻²), certain characteristics of the bands had the same values for both modified materials. Features of the radiation kinetics of sample dynamic parameters were determined. It was deduced that the specific character of the observed radiation-induced changes in spectral and dynamic parameters of vibrations near degenerate modes was due to both the accumulation of radiation damage and a change in the force field surrounding bridging bonds, which is related to a change in the SiO₂ structure. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 75, No. 3, pp. 354–358, May–June, 2008.     

Direct observation of slow morphological transformations and wetting behavior of pulsed laser deposited sub-monolayer gold on (0 0 0 1) sapphire in atmosphere

Using high-resolution atomic force microscope we observed in ambient atmosphere the slow morphological transitions of the incipient adlayer of gold grown on (0 0 0 1) sapphire substrate by pulsed laser deposition. The equivalent average uniform thickness of the gold deposition was about 0.55 Å, which is about one-fourth of its monolayer. A dynamic simulation revealed that about 10% of the gold was implanted into the substrate up to the depth of about 3.3 nm and the top monolayer of the sapphire surface was almost completely depleted of oxygen atoms due to the preferential sputtering by the plume particles. The gold adlayer transformed into a labile phase which enhanced the surface roughness and had a preferred orientation of a wavy structure during 24 h of the deposition. The auto-correlation function of this wavy structure in labile metastable phase revealed two-fold symmetry and provided a preferential size of about 4 nm (peak to peak) with a mean separation of 8 nm. At the end of about 6 days this phase was found to completely transform into an apparently de-wetted phase of beads with average in-plane diameter of ∼20 nm and height of ∼7 nm having large size distribution. Each bead was seen to have coating of a concentric corona layer, which might be that of the condensed moisture or other gaseous species from atmosphere because subjecting these samples to vacuum removed this layer. These observations shed light on the dynamics of the pulsed laser deposited metastable gold adlayer in the incipient stage of its growth on sapphire and their wetting or de-wetting mechanisms in ambient atmosphere.     

NIR Light-Induced ATRP for Synthesis of Block Copolymers Comprising UV-Absorbing Moieties

NIR exposure at 790 nm activated photopolymerization of monomers comprising UV-absorbing moieties by using [Cu^II/(TPMA)]Br₂ (TPMA=tris(2-pyridylmethyl)amine) in the ppm range and an alkyl bromide as initiator. Some of them comprised structural elements selected either from those showing proton transfer or photocycloaddition upon UV excitation. Polymers obtained comprise living end groups serving as macroinitiator for controlled synthesis of block copolymers with relatively narrow molecular weight distributions. Chromatographic results indicated formation of block copolymers produced by this synthetic approach. Free-radical polymerization of monomers pursued for comparison exhibited the expected broader dispersity of molecular weight compared to photo-ATRP. Polymerization of these monomers by UV photo-ATRP failed on the contrary to NIR photo-ATRP demonstrating the UV-filter function of the monomers. This work conclusively provides a new approach for the polymerization of monomers comprising UV-absorbing moieties through photo-ATRP in the NIR region. This occurred in a simple and efficient pathway. However, studies also showed that not all monomers chosen successfully proceeded in the NIR photo-ATRP protocol.     

Influence of friction and asymmetric freeplay on the limit cycle oscillation in aeroelastic system: An extended Hénon’s technique to temporal integration

Nonlinear effects such as friction and freeplay on the control surfaces can affect aeroelastic dynamics during flight. In particular, these nonlinearities can induce limit cycle oscillations (LCO), changing the system stability, and because of this it is essential to employ computational methods to predict this type of motion during the aircraft development cycle. In this context, the present article presents a matrix notation for describing the Hénon’s method used to reduce errors when considering piecewise linear nonlinearities in the numerical integration process. In addition, a new coordinate system is used to write the aeroelastic system of equations. The proposal defines a displacement vector with generalized and physical variables to simplify the computational implementation of the Hénon’s technique. Additionally, the article discusses the influence of asymmetric freeplay and friction on the LCO of an airfoil with control surface. The results show that the extended Hénon’s technique provides more accurate LCO predictions, that friction can change the frequency and amplitude of these motions, and the asymmetry of freeplay is important to determine the LCO behavior.     

IDose^4迭代重建技术应用于低剂量CT肾动脉血管造影的临床分析

为探讨IDose 4迭代重建技术在低剂量CT肾动脉血管造影中的应用价值,选取205例拟行肾动脉CT血管造影患者,随机将其分为4组,A组(51例)采用管电压100 kV、管电流100 mA,碘海醇370 mg I/mL及IDose 4迭代重建技术,B组(51例)采用管电压100 kV、管电流150 mA,碘海醇270 mg I/mL及IDose 4迭代重建技术,C组(51例)采用管电压80 kV、管电流180 mA,碘海醇270 mg I/mL及IDose 4迭代重建技术,D组(52例)管电压120 kV、管电流120 mA,碘海醇370 mg I/mL及滤波反投影(FBP)重建技术。分析各组图像肾主动脉干CT值、噪声(SD)、信噪比(SNR)和噪声比(CNR),受检者接受CT有效剂量(ED)、容积CT剂量指数(CTDI vol)、剂量长度乘积(DLP)、碘摄入量以及重建图像评分差异和诊断效能。结果显示,A、B、C组重建图像评分优于D组,肾动脉主干CT值、SD、SNR、CNR均高于D组,B、C组肾动脉主干CT值、SD略低于A组。A、B、C组CTDI vol、DLP、ED均低于D组,B组CTDI vol、DLP、ED高于A组。A、B、C、D组诊断肾主动脉狭窄准确率分别为92.68%、86.49%、84.62%、82.86%。证实IDose 4迭代重建技术能降低受试者受辐射和造影剂剂量,提高成像质量,在低剂量CT肾动脉血管造影中具有较高可行性和实用性。     

Theory of radiation from relativistic positrons moving in the 〈110〉 axial channels of f.c.c. (diamond) crystal

The emission of radiation from relativistic positrons moving in the 〈110〉 axial channels of an f.c.c. (diamond) crystal has been studied. An expression for the radiation intensity has been obtained for the general case of positron motion. This expression has been simplified for the particular case of well-collimated incident beam. Enhancement of the radiation over (ordinary) bremsstrahlung has been discussed.     

模糊随机参数二维声场数值计算

解决声场参数同时具有模糊性和随机性的问题,实现模糊随机声场声压响应的预测,引入了信息熵理论,利用信息熵的等效转换,将模糊随机声场转化为纯随机声场或者纯模糊声场进行求解,推导了基于摄动法的二维随机声场和模糊声场的有限元计算公式。以模糊随机参数下的二维管道声场模型和某轿车二维声腔模型为例进行了数值计算,所得结果与蒙特卡洛法(Monte Carlo Method)所预测声压变化范围基本一致,同时,转化为纯随机声场和纯模糊声场所求得声压响应变化范围也基本一致,说明了本文方法计算结果的准确性。因此本文方法能很好地应用于模糊随机参数下二维声场的预测,具有重要的工程应用价值。     

High-pressure and high-temperature generation using diamond/sic composite anvils prepared with hot isostatic pressing

Using a hot isostatic pressing (HIP) technique, we synthesized diamond/SiC composites from diamond and Si powders. At an HIP condition of 1450 °C and 100 MPa, a pressure much lower than that of the diamond stability field, diamond powders react with molten Si to form well-sintered diamond/SiC composites. Cubes of the composites with 15 mm edge length were thereby fabricated, and an application to the second stage anvils in a Kawai-type high-pressure apparatus was attempted. A hybrid anvils system using four cubes of the composites and four of the conventional WC was introduced and heating experiments up to 1600 °C became possible. Because the diamond/SiC composites are transparent to X-rays, the present system is applicable not only to diffraction studies but also to radiographic studies that need a larger window for an X-ray image.     

Generation of Electrical Currents and Magnetic Fields by Grain Boundary Motion

The effect of an induced magnetic moment due to grain boundary motion in a magnetic field was studied theoretically in a microscopic and a mesoscopic approximation. It was found that the induced moment generates a drag force on the boundary, which depends on the orientation of the magnetic field with regard to the crystal axis, as observed experimentally. However, the magnitude of the theoretically predicted dependency is much smaller than experimentally observed and even opposite with regard to the orientation dependence. Therefore, the electromagnetic drag can be neglected in comparison with other driving forces for grain boundary motion, but the effect may play a role for fast moving dislocations in a magnetic field.