Synthesis of N-unsubstituted ketene aminals from β-ketocarboxylic esters and cyanamide

The interaction of cyanamide with -ketocarboxylic esters in the presence of Ni(acac)₂ affords N-unsubstituted aminals of acyl(alkoxycarbonyl)ketenes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 419–421, February, 1993.     

Ni／γ—Al2O3,Ni／MgO,Ni／SiO2催化剂上甲烷与二氧化碳重整反应的研究

采用ＸＲＤ，ＵＶ－ＤＲＳ，ＸＰＳ，ＴＰＲ，Ｈ２－Ｏ２滴定和吡啶吸附－红外光谱等技术，研究了负载于具有不同酸碱性的γ－Ａｌ２Ｏ３，ＳｉＯ２，Ｍｇｏ载体上的镍催化剂表面物理化学性质，及其对甲烷与二氧化碳重整制取合成气反应催化活性的影响。结果表明，在上述负载型镍催化剂上，影响重整反应活性和积炭量的主要原因不是催化剂表面酸碱性，而是金属镍在催化剂表面的分散度。     

Rapid dissolution procedure for base-metals-bearing complex materials for quality control assessment

A less labour-intensive method, involving a mixture of 1.0 g MnO₂ + 20 mL HCl (11), is proposed for decomposing seven ores and six metallurgical products for accurate and precise estimation of copper, lead, zinc, cobalt and nickel for quality control assessment. Twentyone international reference materials were also analysed. Results of regression analyses are presented and intermethod comparison studies reveal that the probability of results being different compared with a reference method was less than 1%. Sample decomposition is straightforward and the method has been found to be very simple, rapid and easily adaptable, as it involves no separation of the analyte from the matrix elements.     

The effect of humidity on thermal process of zinc acetate

The thermal decomposition of zinc acetate dihydrate Zn(CH₃CO₂)₂·2H₂O in some humidity-controlled atmospheres has been successfully investigated by novel thermal analyses, which are sample-controlled thermogravimetry (SCTG), thermogravimety combined with evolved gas analysis using mass spectrometry (TG–MS) and simultaneous measurement of differential scanning calorimetry and X-ray diffractometry (XRD–DSC). The thermal processes of anhydrous zinc acetate in dry gas atmosphere by conventional linear heating experiment initiated with the sublimation around 180 °C, followed by the fusion and the decomposition over 250 °C. SCTG was useful to interpret clearly the successive reaction because the high-temperature parallel decompositions were effectively inhibited. The thermal behavior changed dramatically by introducing water vapor in the atmosphere and the thermal process was quite different from that in dry gas atmosphere. Zinc oxide (ZnO) was formed only in a humidity-controlled atmosphere, and could be easily synthesized at temperatures below 300 °C. XRD–DSC equipped with a humidity generator revealed directly the crystalline change from Zn(CH₃CO₂)₂ to ZnO. A detailed thermal process of Zn(CH₃CO₂)₂·2H₂O and the effect of water vapor are discussed.     

液—液萃取浮选法分离Ni（Ⅱ）,Co（Ⅱ）,Fe（Ⅲ）的研究

研究了在（ＮＨ４）２ＳＯ４存在下，乙醇与水分相的条件。试验表明，丁二酮肟与镍生成的螯合物沉淀可以被萃取浮选在乙醇与水两相之间，钴与丁二酮肟生成的螯合物被乙醇萃取，Ｆｅ（Ⅲ）留在水相中，实现了同一体系中三相分离Ｎｉ（Ⅱ），Ｃｏ（Ⅱ），Ｆｅ（Ⅲ），结果满意。     

改进型甲醇合成催化剂NC208的催化特性

采用ＴＰＤ、ＸＲＤ、ＢＥＴ和Ｈ２Ｓ中毒试验等方法，对比研究三组份（Ｃｕ－Ｚｎ－Ａｌ）甲醇合成催化剂Ｃ２０７和添加少量金属氧化物的改进型催化剂ＮＣ２０８．结果表明，工作态ＮＣ２０８催化剂表面Ｃｕ＋／Ｃｕ０的比值和价态稳定性大于Ｃ２０７．     

Multicomponent analysis with a computerized flow injection system using LED photometric detection

An original computer-controlled solid-state photometer has been developed and its potential for simultaneous multicomponent flow-injection analysis of binary and ternary mixtures is demonstrated. The device is simple in construction. Its principle of operation is based on rapid sequential measurements of the absorbance of the complexes formed by the analytes with chromogenic reagents at the wavelengths corresponding to the emission maxima of three light emitting diodes (563, 580 and 638 nm).     

非晶态镍磷—镍钨磷双层组合镀层的耐蚀性能研究

本文对比研究了镍磷镀层、镍钨磷镀层及非晶态镍磷和镍钨磷双层组合镀层的耐蚀性能，分别进行了各种镀层的浸渍腐蚀实验，镀层的Ｘ射线衍射图象、镀层的扫描电镜图象、以及在工厂实际的腐蚀环境里进行的腐蚀实验。实验结果表明镍磷及镍钨磷双层组合镀层的耐 性优于镍磷镀层、镍钨磷镀层的耐蚀性。     

Diffusion and interdiffusion in Zn-disordered AlAs-GaAs superlattices

Several superlattices (SL's) with different layer thicknesses, grown by molecular beam epitaxy (MBE), were disordered via low temperature (550?600°C) Zn diffusions to investigate layer thickness effects on both the Zn diffusion process and the Al-Ga interdiffusion process. The Zn diffusion coefficients were measured using secondary ion mass spectroscopy (SIMS) and Auger electron spectroscopy (AES) and found to be ?10^?12 cm²/sec, increasing somewhat with decreasing layer thickness. The activation energy for the Zn diffusion process ranged from 3.1 eV for an 1100Å/period SL to 2.1 eV for a 320Å/period SL. The Al-Ga interdiffusion coefficient and the activation energy associated with the interdiffusion process were calculated from AES depth profiles. The coefficient is on the order of 10^?16 cm²/sec and the activation energy is approximately 1 eV, independent of the SL layer thickness.     

Methane Combustion Over Fe, Co and Ni Modified Manganese Oxide Catalysts

Fe-Mn, Co-Mn and Ni-Mn composite oxide catalysts based on high specific surface area MnO₂ precursor were prepared and applied to catalytic combustion of CH₄. Results were compared with that of unmodified MnOx and 1wt.% Pd/-Al₂O₃. Below 450°C, manganese oxide catalysts show higher activity than Pd/-Al₂O₃, while the modified manganese oxide catalysts exhibit higher activity than the unmodified one below 420°C. All catalysts were characterized by means of N₂-BET, XRD, TG-DTA and H₂-TPR. Due to the interaction between Fe, Co or Ni oxides and manganese oxide, the activity of the oxygen species of the modified catalysts is improved, which leads to the increase of their CH₄ combustion activity.