Preparation and characterization of p-type hydrogenated amorphous silicon oxide film and its application to solar cell

Thin film wide band gap p-type hydrogenated amorphous silicon (a-Si) oxide (p-a-SiOx:H) materials were prepared at 175 °C substrate temperature in a radio frequency plasma enhanced chemical vapor deposition (RF-PECVD) and applied to the window layer of a-Si solar cell. We used nitrous oxide (N₂O), hydrogen (H₂), silane (SiH₄), and diborane (B₂H₆) as source gases. Optical band gap of the 1% diborane doped films is in the range of 1.71 eV to 2.0 eV for films with increased oxygen content. Dark conductivity of these films is in the range of 8.7 × 10^− 5 S/cm to 5.1 × 10^− 7 S/cm. The fall in conductivity, that is nearly two orders of magnitude, for about 0.3 eV increase in the optical gap can be understood with the help of Arrhenius relation of conductivity and activation energy, and may not be significantly dependant on defects associated to oxygen incorporation. Defect density, estimated from spectroscopic ellipsometry data, is found to decrease for samples with higher oxygen content and wider optical gap. Few of these p-type samples were used to fabricate p-i-n type solar cells. Measured photo voltaic parameters of one of the cells are as follows, open circuit voltage (V_oc) = 800 mV, short circuit current density (J_sc) = 16.3 mA/cm², fill-factor (FF) = 72%, and photovoltaic conversion efficiency (η) = 9.4%, which may be due to improved band gap matching between p-a-SiOx:H and intrinsic layer. J_sc, FF and V_oc of the cell can further be improved at optimized cell structure and with intrinsic layer having a lower number of defects.     

Analyzing the Location of the Transmission Windows in Phase-shifted Fiber Grating

ＡｎａｌｙｚｉｎｇｔｈｅＬｏｃａｔｉｏｎｏｆｔｈｅＴｒａｎｓｍｉｓｉｏｎＷｉｎｄｏｗｓｉｎＰｈａｓｅ－ｓｈｉｆｔｅｄＦｉｂｅｒＧｒａｔｉｎｇ①②ＺＨＡＯＤｏｎｇｈｕｉ，ＤＯＮＧＸｉａｏｙｉ，ＷＡＮＧＧｕａｎｇｊｕｎ（ＩｎｓｔｉｔｕｔｅｏｆＭｏｄｅｒｎ...     

A window diagram for key component analysis in on-line gas chromatography

Window diagrams that optimize for the separation of only one or a few components in a complex mixture are applied to on-line process analysis when speed of analysis is more important than a complete separation of all components in the sample. A window diagram based on retention indexes is the most useful for quickly evaluating the feasibility of a given pair of phases. The one with the most useful output is one based on partition ratios, as this can be used directly with the columns in hand. A PC-based spreadsheet program with integral specific retention volume data for the common liquid phases is described as a tool for selecting the optimum ratio of lengths for the columns in hand.     

Optimization of binary solvents in thin layer chromatography

ΔR_f, the separation between a pair of compounds on a thin layer chromatographic plate, can be predicted as a function of solvent composition for certain binary systems. This allows the prediction of optimum solvent composition for separating a mixture of compounds by thin layer chromatography. A new solvent polarity ranking, based on calculation of ΔR_f is described.     

时间分辨—窗口技术及其应用

Yamada等研究了铕、钐与噻吩甲酰三氟丙酮生成配合物的荧光衰变特性.为了消除钐在铕测定波长处的荧光干扰,在激光脉冲产生后延迟一定时间,使钐的荧光衰变完全后再对铕的荧光信号采样,可在大量钐存在下测定痕量铕.但用类似的方法消除长寿命荧光信号对短寿命荧光信号的干扰则不可能,无法提高该信号的选择性.本文从理论上探讨了一种新的时间分辨荧光光谱技术——窗口技术,实验结果证明效果良好.     

准时生产和宽容交货中的排序问题

本文综述了近年来国内外对宽容交货中排序问题的研究．     

一个宽容交货超前延误单机排序问题

此文考虑下述排序问题（P）：有n个工件需在同一台机器上加工，对各工件有一共同的宽容交货期。若一工件在此宽容期前完工则为一超前工件，若在此宽容期后完工则为一延误工件，要求适当安排一加工方式和宽容交货期的位置使加权超前延误工件数量小。文中证得（P）是NP-hard的，并给出一伪多项式时间的分枝状精确算法，这也就可以认为它是一般意义下的NP-hard问题而不是强NP-hard问题。     

Laws of the single logarithm for delayed sums of random fields II

In an earlier paper we extended Lai's (1974) law of the single logarithm for delayed sums to a class of delayed sums of random fields. In this paper we allow for more general windows.     

四温控点监控器在TM-240塑封压机上的应用

多功能芯片ADT14既是一种输出逻辑电平控制信号的多点温度监控器,又是一种输出模拟电压信号的温度传感器,可广泛应用于各种嵌入控制系统中。介绍了ADT14的特点和在TM-240压机上的应用。     

IEEE 802.11无线网络的两步指数退避算法

IEEE 802.11标准引入二进制指数退避(Binary Exponential Backoff, BEB) 算法以降低节点发送数据包碰撞的概率。然而,BEB存在着不足之处,当数据包碰撞概率较大时,节点的竞争窗口长度会出现振荡,即节点每次发送数据包之前,需要多次加倍扩大竞争窗口长度,而在发送成功之后又把竞争窗口长度缩小到最小值,这个过程反复出现。为了克服竞争窗口振荡问题以增加吞吐量,该文提出两步指数退避(Two-step BEB, TBEB)算法,利用2维马尔可夫链进行建模,导出TBEB算法中节点的退避状态概率分布、平均竞争窗口长度、平均退避次数、每发送一个数据帧所耗时间以及吞吐量等指标,并通过仿真进行验证。通过求解一个简单的优化问题,TBEB可以获得最优竞争窗口长度复位值,使吞吐量达到最优。