大功率LED驱动电路研究设计

根据大功率LED的供能要求,从EMI滤波、功率因素校正、半桥谐振转换三个方面着手,以FAN6961和FSFR2100为控制芯片,设计了一款大功率的高效率LED驱动电路,在90～264VAC的线路输入和满载下,功率因数高于93%,效率高于85%,并具有低输入电流谐波失真和低EMI.     

Breakpoint detection of heating wire in wind blade moulds using infrared thermography

In order to manufacture the fibre glass wind blades, one kind of mould embedded with heating wire is used not only for making numerous ‘copies’ of the original sample, and also heating the mould to a certain temperature for curing. The heating wire is embedded in fibre glass as a sandwich structure, and it may break after a long time usage at high temperatures. In this study, a high voltage discharging (HVD) circuit is used to trigger HVD at the breakpoint, which generates heat and therefore causes temperature increase at the corresponding front surface, one infrared camera is used to monitor the temperature evolution. It successfully and quickly detects breakpoints in spar moulds.     

A Strong Anti-Jamming Algorithm Based on FPGA for Estimating Loop Delay in Digital Predistortion System

At present what are the key points focused in the research of loop-delay estimation for the digital predistorter in the radio frequency (RF) power amplifier system is reducing its complexity of engineering realization and improving anti-jamming ability and computational speed. Besides, opening up its application scope should be contained. For these targets, a novel method including integer loop delay estimation and fractional part is proposed. The integer part applies amplitude-difference summation function and the fractional one adopts the method of finite impulse response (FIR) linear interpolation. The algorithm finds wide applications. What is more, strong anti-jamming ability and low complexity are also its merits. Simulation results support the above opinion. Digital predistortion (DPD) system based on this algorithm achieves good performance.     

High-voltage portable pulsed power supply fed by low voltage source

This article proposes a new structure of voltage multiplier for portable pulsed power applications. In this configuration, which is based on capacitor-diode voltage multiplier, the capacitors are charged by low AC input voltage and discharge through the load in series during pulse generation mode. The proposed topology is achieved by integrating of solid-state switches with conventional voltage multiplier, which can increase the low input voltage step by step and generate high-voltage high-frequency pulsed power across the load. After some discussion, simulations and experimental results are provided to verify the effectiveness of the proposed topology.     

电网重大故障应急抢修自动调度系统浅析

随着人们对电力需求的日益增加，与之对应的电力结构也需要进行改革与发展，特别是电网在发生重大故障时。本文主要通过对电网出现重大事故所带来的影响及危害的分析，提出了解决电网发生重大事故障碍，建立应急抢修自动系统的设计理念及发展趋势。     

Implementation of a high speed frequency synthesizer employing a dual input phase accumulator

We present a new PLL based frequency synthesizer, in which we have replaced the conventional phase frequency detector and the dividers (programmable counters) with a sequential dual input phase accumulator (DIPA), consisting of a digital circuit employing adders, registers and a ladder. The main feature of the DIPA is that the two input frequencies are not required to be normalized (divided down) to the step frequency of the synthesizer. Instead, the two different high frequencies, that is the reference and the output frequency of the synthesizer, are applied directly. The DIPA samples and normalizes their phases at very high rates, calculates their phase difference, producing an output that consists of a dc component proportional to the phase difference and harmonics of the two input high frequencies. These harmonics are high frequencies and can easily be rejected by a wide bandwidth filter of the loop, without affecting the high convergence speed of the loop. Moreover, these harmonics do not generate spurs near the output frequency. The resolution of the DIPA based synthesizer depends only on the length of the digital word of the DIPA, and its convergence speed depends on the lower of the two input frequencies. The output of the DIPA is a linear function of the phase difference of the two input frequencies and its dynamic range exceeds the limit of ±2π that governs the conventional phase detectors. Thus, the proposed frequency synthesizer based on the DIPA has low phase noise, no spurs nearby the output frequency, high resolution and fast convergence rate. Additionally, the output frequency can be digitally modulated under the control of the closed loop, either by phase or frequency modulation.     

LED背光源现况与展望

现阶段,LED被广泛地应用到中小尺寸背光源中,大尺寸TV背光源也由原来的CCFL向LED转变。LED背光源的优势有低能耗、无汞环保、超薄化结构设计、高色彩饱和度、高品质画面显示,其应用领域广阔,几乎涵盖了中小尺寸、大尺寸显示应用领域。文章介绍了国内外LED背光源的标准体系建立情况,并根据当前产业面临的困难提出大尺寸LED背光源的发展方向。     

具备更强机械性能的高功率IGBT模块——采用最新3．3kV IGBT3芯片技术

本文介绍了新一代IHM．B具备更强机械性能的高功率IGBT模块，其融合了最新的设计、材料、焊接和安装技术。首批IHMB模块将搭载最新的、采用沟槽栅单元设计的3．3kV IGBT3芯片，在保持机械兼容性的同时，极大地提高了器件的热效率和电气效率。本文还对宇宙射线以及功率循环试验进行了研究。     

澜沧江流域电站卫星通信网络建设方案

根据澜沧江流域电站传输业务需求分析，提出澜沧江流域电站卫星通信网络建设方案。     

On an open problem of Sankaranarayanan

Let λ(n) be the n-th normalized Fourier coeficient of a holomorphic Hecke eigenform f(z) ∈ Sk(Γ) for the full modular group.In one of his papers,Sankaranarayanan mentioned that it is an open problem to give a non-trivial estimate for the sum of λ(n) over cubes,i.e.n x λ(n3).In this paper,we are able to use the analytic properties of symmetric power L-functions to solve his problem.More precisely,we prove that Σn≤zλ(n3) x(3/4 +ε),Σn≤zλ(n4) x(97+ε).