Multi-color display and its model for a white OLED combined with optical color filters

A bright white organic light-emitting diode (OLED) has been successfully fabricated in which a greenish-white emitting host Bis-(2-(2-hydroxyphenyl) benzothiazole)zinc (Zn(BTZ)₂) is doped with an orange-red fluorescent dye 5,6,11,12-tetraphenylnaphthacene (rubrene). The pure white light emission with CIE coordinates of (0.341, 0.334) is achieved at the driving voltage of 20 V, and the corresponding luminance and external quantum efficiency are 4000 Cd/m² and 0.63%. On the other hand, the pure red, green, and blue (RGB) emissions are obtained from the white OLED combined well with RGB custom-built optical color filters (CFs) with peaks at 616, 556, and 456 nm, respectively. Moreover, based upon the color mixture principles, we build a model of multi-color display mixed by the pure RGB emissions under the controllable bias.     

A new concept of white light generation using a nano-waveguide for the solar radiation collection use

We propose a novel system of a nano-waveguide that can be used to generate the continuous optical spectrum, i.e. white light. A system consists of two micro-ring resonators and a nano-ring resonator that can be integrated into a single system. The large bandwidth signal is generated using a soliton pulse propagating within a Kerr-type nonlinear medium, whereas the continuous bandwidth or wavelength of light signal can be performed. Results obtained have shown the potential of using such a system for white light source generation and amplification, which is discussed. The amplified pulse can be stored within a nano-waveguide, which is allowed to form the continuous spectrum after amplification. Alternatively, the low-level solar radiation can be amplified, and the bandwidth signals can also be enlarged.     

Detecting cortical lesions in multiple sclerosis at 7 T using white matter signal attenuation

Cortical lesions have recently been a focus of multiple sclerosis (MS) MR research. In this study, we present a white matter signal attenuating sequence optimized for cortical lesion detection at 7 T. The feasibility of white matter attenuation (WHAT) for cortical lesion detection was determined by scanning eight patients (four relapsing/remitting MS, four secondary progressive MS) at 7 T. WHAT showed excellent gray matter-white matter contrast, and cortical lesions were hyperintense to the surrounding cortical gray matter, The sequence was then optimized for cortical lesion detection by determining the set of sequence parameters that produced the best gray matter-cortical lesion contrast in a 10-min scan. Despite the B1 inhomogeneities common at ultra-high field strengths, WHAT with an adiabatic inversion pulse showed good cortical lesion detection and would be a valuable component of clinical MS imaging protocols.     

Control of device performances of phosphorescent white organic light-emitting diodes by managing charge transport properties of host materials

Interlayer-free phosphorescent white organic light-emitting diodes (PHWOLEDs) with a mixed-host emitting structure in red emitting layer were developed and device performances were investigated according to the host composition in the red emitting layer. Device performances could be effectively managed by a simple change of host materials in the red emitting layer. A high quantum efficiency was obtained in PHWOLEDs with electron transport-type host in the red emitting layer and red emission was strong in PHWOLEDs with mixed-host in the red emitting layer. In addition, stable color performances were obtained in electron transport-type host rich devices.     

White light interferometry test and analysis of LiNbO3 polarizer

White light interferometer can be used to measure the amplitude extinction ratio (ER) of polarizer and coupling distribution in fiber. A LiNbO₃ polarizer coupled with a polarization maintaining fiber and a silica planar waveguide at the two ends was measured using white light interferometer. According to the principles of optical coherence domain polarimeter (OCDP) technique, the test scheme is analyzed and presented to measure the ER of LiNbO₃ polarizer with its apparatus proposed correspondingly. By analyzing the interference intensity, both the ER of LiNbO₃ polarizer and its coupling crosstalk with optical fiber and waveguide are obtained. The results illustrate that the ER of a 5 mm-long LiNbO₃ polarizer is 71 dB and the crosstalk of the coupling points are around 40 dB. The results have good agreement with analysis.     

Neurofibrillary tangles and plaques are not accompanied by white matter pathology in aged triple transgenic-Alzheimer disease mice

Alzheimer's disease (AD) is a progressive neurodegenerative disorder that is the most common cause of dementia in aging populations. Although senile plaques and neurofibrillary tangles are well-established hallmarks of AD, changes in cerebral white matter correlate with cognitive decline and may increase the risk of the development of dementia. We used the triple transgenic (3xTg)-AD mouse model of AD, previously used to show that white matter changes precede plaque formation, to test the hypothesis that MRI detectable changes occur in the corpus callosum, external capsule and the fornix. T₂-weighted and diffusion tensor magnetic resonance imaging and histological stains were employed to assess white matter in older (11–17 months) 3xTg-AD mice and controls. We found no statistically significant changes in white matter between 3xTg-AD mice and controls, despite well-developed neurofibrillary tangles and beta amyloid immunoreactive plaques. Myelin staining was normal in affected mice. These data suggest that the 3xTg-AD mouse model does not develop MRI detectable white matter changes at the ages we examined.     

基于在聚合物中掺杂染料DCJTB的白色有机电致发光器件

将Alq₃和DCJTB作为掺杂物与基质PVK按照不同比例混合共溶,旋涂成膜,制备了PVK∶Alq₃∶DCJTB为发光层的结构为ITO/ PVK∶Alq₃∶DCJTB/ BCP/Alq₃/LiF/Al的器件,其中Alq₃和BCP分别用作电子传输层和空穴阻挡层,PVK用作蓝光发光层和空穴传输层。保持PVK和DCJTB的质量比为100∶1不变,改变PVK和 Alq₃的质量比,当PVK和Alq3的质量比为20∶1时,得到了效果较好的白光。器件在电压为14 V时,色坐标达到(0.33,0.36),在10～14 V范围内变化甚微。     

极谱分析法连续测定痕量铅和镉

研究了 Pb2 + 和 Cd2 + 与 KCl-酒石酸钠 -三乙醇胺 -明胶体系的二次导数极谱波。在 p H=4 .5的 HAc-Na Ac介质中 ,Pb2 + 和 Cd2 + 分别于 - 0 .4 6 V和 - 0 .6 4V电位处产生一良好的极谱波。峰电流与 Pb2 + 和Cd2 + 的浓度分别在 1× 10 -5— 3× 10 -1g· L-1和 5× 10 -5— 6× 10 -3 g· L-1范围内呈线性关系。 Pb2 + 和Cd2 +的检出限分别为 1× 10 -7g·L-1和 5× 10 -7g·L-1。本法准确、简便、快速、选择性高。已直接用于饮料中铅和镉的连续测定 ,同时也对酒及面粉样品进行了测定 ,回收率分别为 99.9%— 10 0 .1%和 97.0 %—10 4 .8%。     

On the averaged quantum dynamics by white-noise hamiltonians with and without dissipation

Exact results are derived on the averaged dynamics of a class of random quantum-dynamical systems in continuous space. Each member of the class is characterized by a Hamiltonian which is the sum of two parts. While one part is deterministic, time-independent and quadratic, the Weyl-Wigner symbol of the other part is a homogeneous Gaussian random field which is delta correlated in time, but smoothly correlated in position and momentum. The averaged dynamics of the resulting white-noise system is shown to be a monotone mixing increasing quantum-dynamical semigroup. Its generator is computed explicitly. Typically, in the course of time the mean energy of such a system grows linearly to infinity. In the second part of the paper an extended model is studied, which, in addition, accounts for dissipation by coupling the white-noise system linearly to a quantum-mechanical harmonic heat bath. It is demonstrated that, under suitable assumptions on the spectral density of the heat bath, the mean energy then saturates for long times.     

Solid-solution red phosphors for white LEDs

Solid solutions of Eu³⁺-doped metal tungstate and molybdate phosphors were synthesized by solid-state reactions. The crystal structure of the solid-solution phosphors was determined to be tetragonal with a space group of I4₁/c. The red-emitting solid-solution phosphors exhibited a broad absorption band in the range 220-340 nm and sharp excitation peaks in the near UV to green region. The emission intensities of the solid-solution phosphors were enhanced due to the stiff lattices, as a result of the ordered distribution of cations and anions according to differences in ionic size. The increase in the energy transfer is discussed in terms of metal-ligand distances, ionization potential of Mo and the relatively large overlap between the excitation and emission spectra. Such solid-solution phosphors with a bright red emission intensity, relatively short decay time and appropriate color chromaticity have potential for use as red-emitting materials for white LEDs.