Short-wave near-infrared spectroscopy analysis of major compounds in milk powder and wavelength assignment

In this study, short-wave near-infrared (NIR) spectroscopy at 800–1050 nm region was investigated for the analysis of main compounds in milk powder. Through quantitative analysis, the feasibility is further demonstrated for the simultaneous measurement of fat, proteins and carbohydrate in milk powder. Two models, partial least-squares and least-squares support vector machine, were compared and utilized for regression coefficients and loading weights. The affect of standard normal variate spectral pretreatment to model performance was evaluated. Based on the resulted coefficients and loading weights, interesting wavelength regions of nutrition in milk powder are screened and the assignment of all specific wavelengths is firstly proposed in the details associated with chemical base. Instead of the whole short-wave NIR spectral data, these assigned wavelengths which can be reliably exploited were used for the content determination. Compared with other spectroscopy technique, assigned short-wave NIR spectral wavelengths did a good work. Determination coefficients for prediction are 0.981, 0.984, and 0.982, respectively for three components. The proposed wavelength assignment in the short-wave NIR region could be used for the component contents determination of milk powder, and could be as a guidance to interpret the spectra of milk powder.     

用于列ADC电路的斜坡发生器设计

设计了一种用于CMOS图像传感器列级模数转换器(Analog-to-Digital Converter,ADC)电路的10位斜坡发生器.详细介绍了电路的整体结构、工作模式以及仿真结果.在电路中采用了两级转换的方式,并设计了电阻阵列式多路斜坡发生器.在Cadence设计平台下,对模拟电路进行了设计、仿真和版图设计.采用0.5μm双层多晶三层金属(Double Poly Triple Metal,DPTM) CMOS工艺对电路进行了制作.仿真结果表明,该设计基本满足相关要求.     

基于遗传算法的波长选择方法在绿茶近红外光谱分析模型中的应用

利用遗传算法(GA)提取茶叶的近红外吸收特征波长的方法,研究建立了绿茶水分和氨基酸的近红外分析模型,并对波长选择前后两种成分的模型进行了比较分析。结果表明,经遗传算法波长选择后,简化了分析模型,同时模型的稳健性增强。氨基酸预测集的均方根误差(SEP)减小82.1%,水分预测集的均方根误差减小(SEP)76.6%,它们在波长选择前后对应的分析波长数之比分别为995∶7和1990∶33。     

Restoration optimization strategy for multifiber optical networks

Resource optimization is a very important issue related with restoration in optical networks. In the proactive restoration, backup lightpaths are established along with the primary light paths. In this paper, we have proposed a strategy for resource optimization, which works with proactive restoration. The performance of the proposed strategy is evaluated by applying on the sample network.     

A concurrent two-layer restoration scheme for GMPLS WDM networks

Next generation backbone networks will likely consist of IP routers as well as optical cross connects (OXCs) and will deploy an optical control plane protocol. Generalized Multi Protocol Label Switching (GMPLS) has been proposed as the candidate of choice for the control plane. Optical fibers may carry large volumes of traffic and therefore adequate mechanisms must exist to enable the network to automatically recover from failures of fiber. In mission critical networks survivability becomes very important. We investigate the problem of autonomous recovery in such networks. The literature contains work in this area that investigates the problem of multilayer recovery. Such recovery had only been sequential in the sense that the published work recovers first in the optical domain, assuming the availability of redundant resources, and then proceeds to recover packet label switched paths. We report a recovery procedure for recovering packet label switch paths (packet LSPs) and lambda label switch paths (λLSP) concurrently. We have conducted an OPNET-based simulation study that compares the performance of the concurrent scheme with the previously published sequential two-layer recovery scheme. The study shows that the concurrent two-layer recovery scheme performs as much as forty-four percent faster than the sequential two-layer recovery scheme.     

光交叉连接节点的功能结构

光交叉连接(OXC)是未来波分复用光传送网实现交换与选路功能的核心部件.目前,OXC节点的物理结构得到深入研究,已经提出了一些采用不同光子器件的OXC实现方案.本文从描述光交叉连接功能的角度出发,给出一种分析OXC节点功能结构的模型,并比较各种OXC方案在功能结构上的差异。     

全光网络探索

全光网络(AON)的出现标志着网络传输技术又向前迈出了重大的一步,它与传统的传输网络相比具有卓越的性能,被称为第三代网络,不久的将来,它将成为电信、Internet等网络的核心,广电网络工作者应对该技术给予必要的关注与了解.     

Broadband arrayed waveguide gratings on InP

Broadband arrayed waveguide gratings on InP are presented using a novel S-shape design. This design was utilized to accommodate the large free spectral range required for broadband operation. Four and eight channel AWGs with a wavelength channel spacing of 18 nm are discussed. The output peaks of the AWGs have a wide FWHM of 11 nm which provides insensitive operation to polarization, temperature fluctuations, and chromatic dispersion.     

不对称半桥变换器的小信号建模与仿真研究

不对称半桥变换器利用自身的寄生器件实现了开关管的零电压操作,在不影响电路整体结构,以及不增加成本的前提下达到了很好的输入、输出特性。文章建立了该类变换器的小信号模型,进行了动态分析、仿真研究及补偿回路设计,并对整体的电路稳定性和几个关键的频率特性进行了研究。     

Design of an ultra fast pipelined wavelength scheduler for optical burst switching

Optical Burst Switching (OBS) is an emerging technology that allows variable size data bursts to be transported directly over DWDM links without encountering O/E/O conversion. In OBS, before the transmission of a data burst, a burst header is transmitted through an electronic control path, setting up and tearing down optical paths on-the-fly. Data bursts can remain in the optical domain and pass through the OBS network transparently. Unfortunately, system performance will be greatly degraded, if burst scheduling requests cannot be processed in time. This article quantitatively studied the negative impact of control path overloading on the performance of OBS networks. Results have shown that control path overloading greatly affects the performance of the OBS routers, especially for systems with large WDM channel counts. In order to remove this performance bottleneck, we have designed and implemented an ultra fast pipelined burst scheduler that is able to process a burst request every two clock cycles, regardless of the number of WDM channels per link. The design has been implemented in Verilog HDL and synthesized to FPGAs. Circuit level simulation results confirm the correctness of the design. The circuit has achieved 100 MHz in Altera Cyclone II devices, allowing the scheduler to process a burst request every 20 ns. To the authors’ best knowledge, this is the fastest implementation of burst scheduling algorithms.