REVERSE ATOM TRANSFER RADICAL POLYMERIZATION OF STYRENE WITH COPPER-BASED CATALYST

 "Living"/controlled radical polymerization of styrene was carried out with diethyl 2,3-dicyano-2,3-diphenylsuccinate (DCDPS)/CuCl₂/bipyridine (bipy) initiation system at 120℃. The molecular weights of resultant PSt increased with the monomer conversion and the polydispersities were in the range of 1.37 ～ 1.52. A linear ln([M]o/[M])versus time plot was also obtained indicating the constant concentration of growing radicals during the polymerization with this initiation system. End group analysis by ¹H-NMR spectroscopic studies showed that the end groups of the polymer obtained is cω-functionalized by a chlorine group from the catalyst and a-functionalized by a (carbethoxy-cyano-phenyl)methyl group from the fragments of the initiator. Having C1 atom at the chain end, the PSt obtained can be used as a macroinitiator to promote a chain-extension reaction with fresh St and block copolymerization reaction with a second monomer, such as methyl methacrylate, in the presence of CuC1/bipy catalyst via a conventional ATRP process.     

Synthesis of comb‐shaped poly(methyl methacrylate)‐b‐poly(polytetrahydrofuran acrylate) under 60Co γ‐ray irradiation

Comb‐shaped graft copolymers with poly(methyl methacrylate) as a handle were synthesized by the macromonomer technique in two steps. First, polytetrahydrofuran acrylate (A‐PTHF), prepared by the living cationic ring‐opening polymerization of tetrahydrofuran, underwent homopolymerization with 1‐(ethoxycarbonyl)prop‐1‐yl dithiobenzoate as an initiator under ⁶⁰Co γ irradiation at room temperature; Second, the handle of the comb‐shaped copolymers was prepared by the block copolymerization of methyl methacrylate with P(A‐PTHF) as a macroinitiator under ⁶⁰Co γ irradiation. The two‐step polymerizations were proved to be controlled with the following evidence: the straight line of ln[M]₀/[M] versus the polymerization time, the linear increase in the number‐average molecular weight with the conversion, and the relatively narrow molecular weight distribution. The structures of the P(A‐PTHF) and final comb‐shaped copolymers were characterized by ¹H NMR spectroscopy and gel permeation chromatography. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3367–3378, 2002     

Allowed transitions in silicon isoelectronic ions

Dipole‐allowed transitions have been studied for the first few members of the Si isoelectronic sequence. Transition energies, oscillator strengths, transition probabilities and quantum defect values have been estimated for the low‐ and high‐lying excited states of s and d symmetries up to the principal quantum number n=7 for these 3p open shell ions from P⁺ to Cr¹⁰⁺. Time‐dependent coupled Hartree–Fock (TDCHF) theory has been utilized to calculate such transition properties. Most of the results for transition energies, oscillator strengths, and transition probabilities for higher excited states are new. The transition energies for low‐lying excited states agree well with experimental data wherever available. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

Hydroxypropyl chitosan bearing beta-cyclodextrin cavities: synthesis and slow release of its inclusion complex with a model hydrophobic drug

Hydroxypropyl chitosan-graft-carboxymethyl beta-cyclodextrin (HPCH-g-CM beta-CD) was synthesized by grafting CM beta-CD onto HPCH using water soluble 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) as the condensing agent. Due to the presence of hydrophobic beta-CD rings onto the HPCH backbone, this polymer can be used as a matrix for controlled drug release. The adsorption of a hydrophobic model drug, ketoprofen, by HPCH-g-CM beta-CD microparticles (using tripolyphosphate as an ionic crosslinking agent) fitted well in the Langmuir isotherm equation. The drug dissolution profile showed that HPCH-g-CM beta-CD microparticles provided a slower release of the entrapped ketoprofen than chitosan, and the release behavior was influenced by the pH value of the medium. These results suggest that beta-CD grafted with chitosan derivatives may become a potential biodegradable delivery system to control the release of hydrophobic drugs with pH-responsive capability.     

Synthesis of linear and starlike polymers from poly(propylene glycol) methacrylate using controlled radical polymerization

The copper‐catalyzed atom transfer radical polymerization (ATRP) of poly(propylene glycol) methacrylate (PPGM) in solution to produce linear and starlike polymers is reported, using methylethyl ketone as the solvent and a temperature of 80 °C. The ATRP system used was efficient for polymerization of the functionalized monomer without protecting hydroxyl end groups of monomer. The polymerizations were consistent with “living” or controlled processes, as revealed by the linear evolution of molecular weight with conversion. Increasing the [M]₀:[I]₀ ratio resulted in increasing molecular weights, whereas the polydispersity indices remained low (M_w/M_n < 1.4) even at high conversion. Decreasing the [CuBr]₀:[I]₀ ratio resulted in lower conversions, slightly larger polydispersities, and decreased molecular weights, likely resulting from a lower initiation efficiency. Polymers were characterized by ¹H and ¹³C NMR; molecular weights of polymers with low degrees of polymerization were estimated by end‐group analysis from ¹³C NMR spectra obtained using distortionless enhancement by polarization transfer and the gated decoupling techniques. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 334–343, 2002     

Microgravimetric Investigations of High-Temperature Superconductors

It has been confirmed that, in oxide superconductors, the superconducting transition temperature T_c depends strongly on the oxygen content and oxygen ordering. The microgravimetric method is very useful in the analysis of oxide superconductors, because it allows investigations in vacuum and controlled environments in classical applications: thermogravimetric analysis, kinetics and thermodynamics of reaction, determination of oxygen contents in redox reactions, investigations of the correlation of the deviation from stoichiometry and carrier concentration and also the combined measurement of mass and additional parameters, e.g. evolved gas analysis, etc. Selected papers are reviewed. This revised version was published online in July 2006 with corrections to the Cover Date.     

C波段微波低相位噪声介质振荡源

介绍了微波低相位噪声介质振荡器的设计方法。就影响介质振荡器相位噪声的因素进行了讨论,从谐振回路有载Q值、有源器件、增益压缩量、电路模式等几个方面提出了降低相位噪声的方法,并给出了一个C波段微波低相噪振荡器的设计实例。测试结果表明:该振荡器工作频率3 900 MH z,输出功率大于10 dBm,相位噪声达到-102 dB c/H z@1 kH z;-128 dB c/H z@10 kH z。     

X波段同轴腔多注速调管的研究

开展了具有同轴谐振腔互作用电路和双模工作杆控电子枪的X波段同轴腔双模多注速调管的研究工作.结合数值计算和冷测实验,对工作于TM₃₁₀高次模的同轴谐振腔模式分布和特性参数进行研究,获得了可满足多注速调管要求的谐振腔特性阻抗和良好的模式稳定性.采用具有双控制极的新型杆控多注电子枪及电子光学系统,可使多注速调管具有双模的新工作特性,通过数值模拟获得了优化的几何参数和具有良好层流性和波动性的空心多电子注.对采用6个电子注和5个谐振腔的X波段多注速调管进行了注波互作用大信号计算,结果表明当电子注电压为21.5kV,脉冲电流为14.4A时,可在30MHz频带范围内获得的100kW左右的脉冲输出功率,互作用效率大于30%,增益大于36dB.     

Electric field‐induced birefringence,optical rotatory power and conoscopic measurements of a chiral antiferroelectric smectic liquid crystal

Using a photoelastic modulator‐based novel set‐up, the electric field‐induced in‐plane birefringence and the optical rotatory power (ORP) were measured of an antiferroelectric liquid crystalline compound (12OF1M7) in its various phases using 30 µm homeotropic cells. Some specific signatures of the in‐plane birefringence and of the ORP for the various phases are being established. A relatively small threshold field is needed for the unwinding process of the antiferroelectric phase with a unit cell of four layers [SmC_A*(1/2)] compared with that for two layers [SmC_A*(0)]. On application of the electric field on the high temperature side of the SmC_A*(1/2) phase (80.1–81.5°C), a field‐induced phase transition is shown to occur directly to the SmC* phase, whereas on the lower temperature side (79.4–80.1°C) the transition takes place to SmC* via the SmC_A*(1/3) phase. The in‐plane birefringence exhibits a critical power law dependence for the SmC*–SmA transition. The ORP changes sign within the temperature range of the phase with a unit cell of three layers, reflecting a change in the handedness during this phase. Using tilted conoscopy, the results for the biaxiality and the apparent tilt angle for a smectic liquid crystal with a tilt angle greater than 18° in the ferroelectric phase are reported. The biaxiality implies the difference in the refractive indices between the two minor axes of the refractive index ellipsoid. The optical transmittance at visible and IR wavelengths for free‐standing films reveal characteristic reflection bands for these phases. The modulated structures of the reflected bands appear just above the SmC_A* phase and below SmC_A*(1/3); these are possibly due to an easy deformation of the phase by the surfaces.