基于飞秒激光模间拍频法的大尺寸测距方法

本文基于飞秒激光模间拍频法实现多波长相位式绝对距离测量, 通过改变光频梳重复频率合成波长扩大测距量程, 并采用监测臂和双快门切换系统补偿和消除由电路产生的相位差单向漂移和大幅抖动. 实验中以20倍重复频率的拍频进行测量, 在30 min内相位测量的标准偏差为0.022°; 与双频激光干涉仪比对1125 mm行程内位移测量结果, 测距精度优于50 μm; 实验验证了合成波长方法扩大量程方案的可行性, 获得的测距重复性优于3 μm, 该系统理论上可扩展量程至7.5 km.     

Localization microscopy (SPDM) facilitates high precision control of lithographically produced nanostructures

Nanoscale resolution in material sciences is usually restricted to scanning electron beam microscopes. Here we present a procedure that allows single molecule resolution of the sample surface with visible light. Highlighting the performance we used electron beam lithography to generate highly regular nanostructures consisting of interconnected cubes. The samples were labeled with Alexa 647 dyes. The spatial organization of the dyes on nanostructured surfaces was localized with single molecule resolution using localization microscopy. This succeeded also in an absolute spatial calibration of the localization method applied (spectral precision distance microscopy/SPDM). The findings will contribute to the field of product control for industrial applications and long-term fluorescence imaging.     

基于小波高频距离像的红外小目标检测

针对远距离复杂背景下红外小目标检测问题,本文提出了一种基于小波高频距离像的方法。该方法首先将处理空间变换到小波域,通过分析残留背景、目标和噪声系数在高频子带的差异,定义基于邻域均值的子带系数表达形式,构造高频子带系数的中心向量,对小波高频图像进行综合形成距离像,得到红外复杂背景的抑制结果。在此基础上,利用恒虚警率算法将单帧背景抑制图像分割成候选目标、残留背景和噪声像素点。最后,在时间域基于目标运动的相关性,利用管道滤波实现红外小目标的最终检测。仿真实验结果表明,相对于经典算法,本文方法可以实现对红外复杂背景的有效抑制,增强目标信号的强度,准确稳定的从红外复杂背景中检测出小目标。     

Comparison of cadmium manganese telluride crystals grown by traveling heater method and vertical Bridgman method

In this paper, the CdMnTe crystals were grown by the Travelling Heater Method (THM) and the Vertical Bridgman (VB) method, respectively. The crystal properties, including the Mn axial distribution, impurity concentrations, resistivity, Hall effects and energy response spectra, were characterized and compared. The results shown that the CdMnTe crystal grown by the THM had more uniform Mn distribution and lower impurity concentrations compared to the crystal grown by VB method. The resistivity of CdMnTe grown by THM was (1.5 ∼ 8) × 10¹⁰ Ω.cm, while the resistivity of CdMnTe grown by VB was 10⁷∼10⁸ Ω.cm. The In dopant distributed uniformly throughout the crystal ingot grown by THM with the doping concentration of 0.6–0.7 ppm, while the In dopant concentration throughout the crystal grown by VB method is in the range of 1.31–2.4 ppm. Hall measurements revealed that the conductivity of the THM grown crystal was weak n‐type conductivity and the VB grown crystal was p‐type conductivity. A planar CdMnTe detector from the THM grown crystal showed a resolution of 8% of the ²⁴¹Am radiation at 59.5 keV peak, however, no energy response was revealed with the CdMnTe detector by the VB method. The results demonstrate that CdMnTe crystal grown by THM have better crystal quality and detector properties compared to that by VB method.     

Computing the distribution of the Robinson-Foulds distance

With the exponential growth of genome databases, the importance of phylogenetics has increased dramatically over the past years. Studying phylogenetic trees enables us not only to understand how genes, genomes, and species evolve, but also helps us predict how they might change in future. One of the crucial aspects of phylogenetics is the comparison of two or more phylogenetic trees. There are different metrics for computing the dissimilarity between a pair of trees. The Robinson-Foulds (RF) distance is one of the widely used metrics on the space of labeled trees. The distribution of the RF distance from a given tree has been studied before, but the fastest known algorithm for computing this distribution is a slow, albeit polynomial-time, O(l⁵) algorithm. In this paper, we modify the dynamic programming algorithm for computing the distribution of this distance for a given tree by leveraging the number-theoretic transform (NTT), and improve the running time from O(l⁵) to O(l³ log l), where l is the number of tips of the tree. In addition to its practical usefulness, our method represents a theoretical novelty, as it is, to our knowledge, one of the rare applications of the number-theoretic transform for solving a computational biology problem.     

Examination of Changes in 6-minute Walk Distance and Related Factors in Patients with Perioperative Peripheral Arterial Disease

Objective: This study aimed to clarify the effects of pre- and postoperative physical function on the 6-minute walking distance (6MWD) in patients with peripheral arterial disease (PAD). Method: Forty-two elderly patients with PAD who were hospitalized for revascularization and able to walk independently were included in the study. The 6MWD, ankle brachial index (ABI), weight-bearing index (WBI), gait, and intermittent claudication distance (ICD) were measured before and after the surgery, and skeletal muscle index was measured only before surgery. Analyses were performed by comparing the pre- and postoperative values of each factor using a paired t-test. In addition, multiple regression analysis was performed with 6MWD as the dependent variable before and after surgery. Results: Postoperatively, pain disappeared in 22 patients, and ABI, ICD, 6MWD, and stride length improved significantly. ICD and stride length were extracted as factors related to 6MWD before and after surgery, and ABI, WBI, and stride length were extracted as factors related to 6MWD after surgery. Conclusion: The improvement of intermittent claudication associated with revascularization suggests a stronger influence of functional aspects on postoperative 6MWD.     

利用声光延迟线的距离欺骗干扰

距离欺骗干扰是雷达对抗的重要手段,延迟线是其关键技术。将声光延迟装置与固定光纤延迟相结合的混合延迟线,发挥了两者的优点,实现了较长的延迟时间以及延迟时间的连续可调。文中分析了其工作原理和性能指标,进行了延迟实验,论证了其可行性。     

一种基于倒谱特征的语音端点检测改进算法

提出了一种应用语音倒谱特征参量的端点检测改进算法,对信噪比(SNR)从-10～20dB的带噪语音信号进行仿真实验,结果表明,所提方法能较为准确地检测到语音端点。     

基于形状匹配变形模型的三维人脸重构

为了从多幅人脸图像构造三维人脸结构,通常需要自动提取不同图像中的对应特征点,这往往是很难完成的.为了避免这个困难,本文建立了一个基于形状匹配的三维变形模型,在保证形状最佳匹配的条件下,实现对人脸图像姿态的估计和三维人脸重构.模型采用径向基函数对通用头部模型进行变形,用形状上下文来描述点之间的形状相似性,形状距离用来描述头部模型和人脸图像整体形状上的相似性,从而实现形状最佳匹配意义上的三维重构.实验表明,本文的算法只需要在人脸图像中提取特征点集,不需进行配准,就可以恢复出令人满意的三维头部结构.     

基于马氏距离的皮肤图像症状识别系统的设计

介绍了一种皮肤图像症状的自动识别系统,利用马氏距离图像识别的算法,经过图像颜色空间转换、自适应法求取阈值进行图像分割、数学形态学后处理和边缘检测、症状区域的轮廓提取和种子填充等图像处理过程,最后提取了皮肤样本的26个特征参数,计算皮肤样本距离黄褐斑、粉刺、黑头、雀斑4种症状的马氏距离,根据马氏距离最小原则对被测皮肤样本进行症状归类.