由聚苯胺粒子组成的电流变液的研究

由经碱处理的掺杂态聚苯胺（ＰＡｎ）制得高介电常数的半导体ＰＡｎ粒子，将其悬浮于电绝缘油可组成电流变液，讨论了电流变（ＥＲ）液的静态屈服应力（τ＿ｓ），电流密度等性能与ＰＡｎ的介电常数（ε＿ｐ），导电率（σ），体积分数和应用电场强度的关系。对导电率相同的ＰＡｎ粒子，用氨水处理的ＰＡｎ粒子ε＿ｐ较用ＮａＯＨ液处理的高，前者在σ足够低如σ≤１．０×１０￣（－７）／ｃｍ时，ＥＲ液的τ＿ｓ随偶极系数的平方（β￣２）的增大而呈现非线性增加；后者ＥＲ液的τ＿ｓ随β￣２的增大出现一最大值．结果表明：由聚苯胺粒子可组成高电流变活性的无水ＥＲ液．     

Ionization of aqueous toluic acids: Conductance and thermodynamics

Conductivities of aqueous solutions ofortho-, meta-, andpara-toluic acids have been measured for the concentration range 0.1–2 millimolar and at 5° intervals from 5 to 100°C. At each temperature pK _a(m) andA ₀ have been calculated using the paired ion model recently described by Fuoss. Thermodynamic parameters have been calculated for the ionization of each acid, and Walden products for the anions. Results are discussed in terms of contributions to acidity by enthalpy and entropy changes as well as by hydration of the various solute species.     

Lattice Thermal Transport in the Homogeneous Cage-Like Compounds Cu3VSe4 and Cu3NbSe4: Interplay between Phonon-Phase Space,Anharmonicity, and Atomic Mass

Understanding the correlation between crystal structure and thermal conductivity in semiconductors is very important for designing heat-transport-related devices, such as high-performance thermoelectric materials and heat dissipation in micro-nano-scale devices. In this work, the lattice thermal conductivity ( ) of the cage-like compounds Cu₃VSe₄ and Cu₃NbSe₄ was investigated by experimental measurements and first-principles calculations. The experimental of Cu₃NbSe₄ is approximately 25 % lower than that of Cu₃VSe₄ at 300 K. The relevant important physical parameters, including the sound velocity, heat capacity, weighted phonon phase space (W), and third-order force constants along with atomic mass were theoretically analyzed. It is found that W is the dominant parameter in determining the , and the other factors only play a minor role. The physical origin is the relatively “soft” lattice of Cu₃NbSe₄ with heavier atomic mass. This research provides deep insight into the correlation between the thermal conductivity and crystal structure and paves the way for discovering high-performance thermal management device and thermoelectric materials with intrinsically low .     

关于气相渗透法仪器常数问题——一个新模式

气相渗透法广泛用于测定齐聚物和低分子量聚合物的数均分子量(M_n)。分析文献数据和本文的实验证明,仪器常数K值随溶质的分子量而变化。本文提出了一种新的说明 VPO法 K值依赖于溶质分子量的模式,根据此模式,可清楚地说明这种依赖关系。     

CCl2自由基与H2O分子反应动力学研究

用213 nm激光光解CCl4产生CCl2自由基，用LP LIF技术测定了室温下基态CCl2自由基与H2O分子的反应速率常数为(5.45±0.95)×10－14 cm3•molecule－1•s－1.在G2MP2理论水平上计算了CCl2＋H2O反应的最低单重态势能面，揭示了插入与加成 消除两种反应机理，得到了三个可能的产物通道:HCl＋HClCO、HCl＋trans ClCOH以及HCl＋cis ClCOH.并用RRKM TST和传统过渡态理论计算了这三个通道的分支比及其温度效应.结果说明在低温下（273 K），插入机理的产物通道的分支比远大于加成 消除机理的产物通道， HCl＋HClCO是主要产物，分支比为77.4％，其次是HCl＋cis ClCOH，分支比为22.6％.而在高温下（3000 K），加成 消除机理的反应通道大于插入机理， HCl＋trans ClCOH分支比为82.3％.     

A density functional study of propylene glycol conversion to propanal and propanone of various acid-catalyzed reaction models: a water-addition effect

The acid-catalyzed models on reaction mechanisms of pinacol rearrangement of propylene glycol conversion to propanal and propanone have been investigated using the density functional method at 298.15 K. Thermodynamic quantities of activation steps of four water-addition models were obtained. The number of added water interacting with the transition states of three concerted pathways has obviously affected the product ratio. The relative energetic profiles of the conversion reactions of all solvation models have been comparatively displayed. Estimation of the percent ratio of product composition computed from activation free energies of each acid-catalyzed reaction model was carried out. The percent ratios of propanal and propanone were decreased as the number of added water increased.     

CCl2(A1B1)被O2及取代甲烷类分子猝灭的动力学研究

对CCl4／Ar混合气体放电产生CCl2自由基，再用541.52nm激光将电子基态CCl2激发到激发态A^1B1（0，4，0）振动态k=0能级上，通过检测 激发态CCl2时间分辨荧光信号，测得室温下CCl2(A^1B1)被O2，CF4，CF2Cl，CH3NO2，CH2Br2等分子猝灭的实验结果，用改进的三能级模型分析处理实验数据，获得态分辨速常数KA和Ka值，并对实验结果进行了讨论。     

Solubility Study of Nimodipine Inclusion Complexation with α- and β-Cyclodextrin and some Substituted Cyclodextrins

The solubility of nimodipine was measured in aqueous solutions of the following cyclodextrins: -cyclodextrin (-CD), hydroxypropyl--CD (HP--CD), -cyclodextrin (-CD), random substituted methyl--CD (M--CD), three hydroxypropyl--CDs (HP--CD) with mutually different average degree of substitution, and hydroxypropyl--cyclodextrin (HP--CD). From the determined linear solubility diagrams the values of the binding constant K₁₁ of the inclusion complexes of nimodipine with the respective CDs were evaluated. The -CDs efficiently solubilized sparingly soluble nimodipine, the highest value of K₁₁ was found for M--CD (1680 M^-1), followed by -CD (550 M^-1) and HP--CDs, where the higher degree of substitution lowered K₁₁. Only slight solubilization of nimodipine was observed in the solutions of the -CDs and HP--CD.     

叔醇脱水成烯反应的溶剂化能力与介电常数的关系

我们用Fe_2(SO_4)_3·xH_2O为催化剂,对2-甲基-2-已醇脱水生成烯烃反应的溶剂化能力及其动力学做了研究,测定了20种不同溶剂中的反应速率常数和以丙至辛6种直链醇为溶剂于不同温度下反应的速率常数,确定了溶剂化能力与溶剂介电常数之间的线性关系。这方面工作尚未见报道。