自动检测系统原理应用和发展状况的研究

自动检测系统广泛应用于各类产品的设计、生产、使用、维护等各个阶段,对提高产品性能及生产率、降低生产成本及整个生产周期成本起着重要作用。首先介绍了检测、检验以及自动检测系统的概念,其次通过自动检测系统的各个组成部分,详述了系统的工作原理,介绍了自动检测系统组建的概念、结构以及在组建中所使用的关键技术。对早期的自动检测系统和新一代自动检测系统进行了介绍,并详述自动检测系统的3个发展阶段。     

W‐band physical layer design issues in the context of the DAVID–DCE experiment

This paper aims at focusing on the aspects concerning the physical layer design for an innovative satellite communication experiment. Such an experiment, denoted by the acronym DAVID–DCE (Data and Video Interactive Distribution—Data Collection Experiment) is based on the exploitation of the W‐band (75–110 GHz) for high‐bit‐rate satellite transmission. The potential advantages of using of the W‐band are mainly related to the great bandwidth availability, and to the absence of interference. Moreover, an expected result of the experiment is a substantive improvement in the communication system's performances in the presence of meteorological phenomena (e.g. rain) as compared with the more conventional Ka‐band satellite transmission. On the other hand, problems to be faced concern the non‐ideal behaviours of hardware devices employed for high‐frequency digital transmission. In particular, carrier recovery and timing recovery are the most crucial signal‐processing tasks to be carefully considered in the design of the physical level of the system, because they considerably suffer from hardware impairments. The purpose of this work is to illustrate the proposed solutions in terms of the most critical modulation, demodulation and synchronization design issues, together with the effects of non‐ideal behaviours of hardware components on BER performances. Copyright © 2004 John Wiley & Sons, Ltd.     

Simulation of Vacuum Microelectronic Triode Made of Single Carbon Nanotube

Vacuum microelectronic triode performance, based upon a unit cell with a nanotube field emitter, gate, and anode, was evaluated via computer simulation. Electron emission was calculated from the modified Fowler-Nordheim equation. The dependence of emitted current, upon geometrical factors, e.g., nanotube radius, nanotube height, and gate's hole radius, is shown. The device design parameters of trans-conductance, and cutoff frequency have been calculated, which show that this structure can be used as a microwave and millimeter wave amplifier. Electron current flux is shown for time-dependent 1–Thz sinusoidal variation frequency input.     

显像管发射小的跟踪分析

本文对黑白显像管发射小进行了跟踪分析，认为阴极涂层脱落和管内真空度不良是导致显像管发射小的主要原因。     

大型复杂高精度波导钎焊设备的研制：简介ZHS—132型真空钎焊炉

应军事电子装备，特别是军用雷达预研和生产的急需，电子工业部第二研究所近期研制的成功大型、复杂、高精度波导钎焊设备ＺＨＳ－１３２型真空钎焊炉。文中主要介绍了该设备的开发背景和对波导钎焊工艺的影响，该设备的设计构思、结构和技术特征，使用功能和效果，以及推广应用前景。     

光辅助超高真空CVD系统制备SiGe异质结双极晶体管研究

介绍了采用紫外光化学汽相淀积(UVCVD)、超高真空化学汽相淀积(UHVCVD)和超低压化学汽相淀积(ULPCVD)技术研制的化学汽相淀积(CVD)工艺系统,简称U³CVD系统.应用该系统,在450℃低温和10^-7Pa超高真空环境下研制出了硅锗(SiGe)材料和硅锗异质结双极晶体管(SiGe HBT)材料.实验表明,该系统制备的SiGe HBT材料性能良好.     

强化自动控制系统课程实践环节的搜索

介绍了利用科研项目和科研成果，将最新技术与成果向实践性环节转化，开设高水平系列化的综合型，设计型实验的一些做法，并总结了科研成果向实践性环节转化过程中的一些社会。     

基于优化探测窗口的光斑质心探测方法

哈特曼-夏克波前传感器进行波前探测时，用子孔径光斑强度的一阶矩来计算光斑质心位置，子孔径窗口作为探测窗口，但探测时子孔径窗口内噪声对一阶矩有很大的影响，会使质心探测精度产生很大的误差。因此在计算质心位置时探测窗口的选取对探测精度有重要影响，必须选取合适的探测窗口来提高光斑质心探测精度。为此，在传统算法的基础上提出优化探测窗口的方法来提高质心探测精度,仿真和实验结果表明新方法提高了质心探测的精度，未经处理的高噪声恢复波前的波前残差峰谷值是2.851 4λ，均方根值是0.606 3λ，优化探测窗口后波前残差的峰谷值是1.636 2 λ，均方根值是0.367 1 λ，重构误差减小了40％。证明了算法的可行性和稳定性。     

微密封真空微电子二极管

本文介绍了一种微密封真空微电子二极管的工艺及实验结果。     

精密扇形扫描稳速控制

在扇形扫描中，马达稳速的控制是通过相位补偿实现的。本文提出一种新的稳速控制方法、相位补偿控制，并介绍了相位补偿电路的设计。