Mononuclear and dinuclear chiral vanadium(V) complexes with tridentate Schiff bases derived from R(−)-1,2-diaminopropane: Synthesis,structure, characterization and catalytic properties

A series of vanadium(V) complexes with unsymmetrical tridentate Schiff base ligands, obtained by the single condensation of R(−)-1,2-diaminopropane with salicylaldehyde and its derivatives, 2-hydroxy-1-naphthaldehyde, 2-hydroxyacetophenone, 1-hydroxy-2-acetonaphthone and 2-hydroxybenzophenone, were prepared. The complexes were characterized by elemental analysis and by their IR, CD, UV–Vis, 1D (¹H, ⁵¹V) and 2D (COSY, NOESY, gHSQC) NMR spectra. Crystal structures of the mononuclear complex {R(−)-2-amino-1-N-[(2′-oxido-κO-4′,6′-dimethoxyphenyl)methylene]aminopropane-κ²N}dioxidovanadium(V), VO₂(C₁₂H₁₇N₂O₃), 4, and of the dinuclear complex, di-μ-oxido-bis({R(−)-2-[1-(2-aminopropylimino)ethyl]-4-methylphenolato-κ³N,N′,O}oxidovanadium(V)), V₂O₄(C₁₁H₁₅N₂O)₂, 5, have been obtained by X-ray diffraction studies. The structure of 4 was revealed to be a distorted trigonal–bipyramidal coordination geometry, rarely encountered in VO₂(tridentate Schiff base) complexes. Complexes 2 and 3 have the ability to catalyze the oxidation of prochiral sulfide substrates PhSR (R = Me, Bz) utilizing hydrogen peroxide or cumene hydroperoxide (CHPO) as the oxidant.     

Spectral and thermal characterization of polyaniline–oxalic acid salt

Polyaniline–oxalic acid salts were prepared at 5 and 30°C by chemical polymerization of aniline using different concentration of oxalic acid. Polyaniline base was obtained from the corresponding polyaniline salt by dedoping using aqueous ammonium hydroxide solution. Conductivity measurements, elemental analysis, Infrared, electronic absorption, electron paramagnetic resonance spectral, and thermogravimetric analysis were performed on the polyaniline salts and bases. Composition and the extent of dopant in polyaniline salt systems where determined. The value of composition of polyaniline: oxalic acid is 4: 1.6 and the polymer yield is around 66%. The value of conductivity, polymer yield and composition of polyaniline–oxalic acid salt is independent of concentration of oxalic acid used and also the synthesis temperature. The results are compared with polyaniline–hydrochloride salt prepared by chemical polymerization. The conductivity of polyaniline–oxalic acid salt is three orders of magnitude lower than that of polyaniline-hydrocholoride salt. © 1995 John Wiley & Sons, Inc.     

SYNTHESIS AND CHARACTERIzATION OF TRIPHENYLANTIMONY (V) (O-ALKYL,O-CYCLOALKYL AND O-ARYLTRITHIOPHOSPHATES)

Triphenylantimony (V) (O-alkyl,O-cycloalkyl and O-aryltrithiophosphates) of the type Ph ₃ Sb[S ₂ (S)P(OR)] (R = Me, Et, Pr ⁿ , Pr ⁱ , Bu ⁿ , Bu ^s , Bu ⁱ , Am ⁱ , Ph and C.h. = cyclohexyl) have been synthesized for the first time by the reaction of triphenylantimony (V) dibromide with potassium trithiophosphates in 1:1 molar ratio in methanol. These new compounds have been characterized by elemental analysis, molecular weight determinations, and spectroscopic (IR,¹³C and ³¹P NMR) studies. On the basis of these data trigonal bipyramidal geometry has been proposed for these compounds.     

Complexes of Co(II), Ni(II), Cu(II), and Pd(II) with Sulfametrole-Cyclodiphosph(V)azane Derivatives

Novel [1,3-di-[N ₁ -4-methoxy-1,2,5-thiadiazole-3-yl-sulfanilamide(sulfametrole)]-2″4-bis-[1,3-dithiole-2-thione-4,5-dithiolate]-2′,4′-dichl-orocyclodiphosph(V)azane] (III) , was prepared and their coordinating behavior towards the metal ions Co(II), Ni(II), Cu(II), and Pd(II) was studied. The structures of the isolated products are proposed based on elemental analyses, IR, UV, ¹ H, and ³¹ P NMR, ESR, magnetic susceptibility, molar ratio, conductometric titration and electrical conductivity measurements. The prepared complexes showed high to moderate bactericidal activity compared with the ligand.     

d,h-m̈-Alkoxoalkylphosphonato-e-m̈-alkoxo-f-m̈-oxo-bis[trichloroantimon(V)]-Verbindungen

d,h-m?-Alkoxoalkylphosphonato-e-m?-alkoxo-f-m?-oxo-bis[trichloroantimony(V)] Compounds The binuclear antimony(V) complexes Cl₃Sb(O)[R³(R¹O)PO₂](OR²)SbCl₃ 1 to 7 with R¹, R² and R³ = Me or Et in solution slowly exchanges the R² groups between the equatorial oxygen atoms of the Sb₂O₂ ring. The SbO(3)PO(3)Sb ringsystem makes rapid pseudorotation. The resulting isomeres are detected by nmr spectroscopy.     

Structural effects in electron transfer reactions: comparative interfacial electrochemical kinetics for cis- versus trans-dioxorhenium(V)(bi)pyridine oxidation

The comparative interfacial oxidation kinetics of the approximate structural isomers trans-(O)₂Re^V(py)⁺₄ and cis-(O)₂Re^V(bpy)(py)⁺₂ (py, pyridine; bpy, 2,2′-bipyridine) have been assessed in aqueous solution via conventional cyclic voltammetry at a highly ordered pyrolytic graphite (HOPG) electrode. HOPG was employed because of its known propensity to diminish interfacial electron transfer (ET) rates (by ca. three to four orders of magnitude) and because of a probable lack of importance of kinetic work terms (diffuse double-layer corrections). Measured rates for the trans complex exceed those for the cis by about a factor of 3. Expressed as an effective activation Gibbs energy difference ΔG^*, this corresponds to a cis-trans difference of ca. 3 kJ mol⁻¹. The actual vibrational barriers to ET have determined from a combination of published X-ray structural results (trans complex) and new resonance Raman results (cis complex). The values are 0.6 kJ mol ⁻¹ for the trans oxidation and 4.4 kJ mol⁻¹ for the cis oxidation (i.e. close to the barrier difference inferred from rate measurements). Further analysis shows that most of the barrier difference is associated with displacement of a (predominantly) Re-N(bpy) stretching mode found only in the cis system. Differences in metal-oxo displacements (cis > trans) are also implicated.     

Quadrupole mass filter operation under the influence of magnetic field

This work demonstrates resolution enhancement of a quadrupole mass filter (QMF) under the influence of a static magnetic field. Generally, QMF resolution can be improved by increasing the number of rf cycles an ion experiences when passing through the mass filter. In order to improve the resolution, the dimensions of the QMF or the operating parameters need to be changed. However, geometric modifications to improve performance increase the manufacturing cost and usually the size of the instrument. By applying a magnetic field, a low‐cost, small footprint instrument with reduced power requirements can be realized. Significant improvement in QMF resolution was observed experimentally for certain magnetic field conditions, and these have been explained in terms of our theoretical model developed at the University of Liverpool. This model is capable of accurate simulation of spectra allowing the user to specify different values of mass spectrometer dimensions and applied input signals. The model predicts enhanced instrument resolution R>26 000 for a CO₂ and N₂ mixture with a 200‐mm long mass filter operating in stability zone 3 via application of an axial magnetic field. Copyright © 2013 John Wiley & Sons, Ltd.     

Chromium(V) Oxide Trichloride,and some Pentachlorido‐­oxido‐chromate(V) Salts: Structures and Spectroscopic ­Characterization

Crystalline CrOCl₃ contains [Cl₂OCr(μ‐Cl)₂CrOCl₂] molecules with two square pyramidal CrOCl₄ units sharing a common edge and with the Cr–O arranged anti, a new structure type for transition metal MOX₃ compounds. Crystals are monoclinic with space group P2₁/c, Z = 4, with a = 5.735(5), b = 13.738(7), c = 11.318(4) Å, α = 90°, β = 98.346(6)°, γ = 90°. Its IR and UV/Vis spectra are reported and compared with those of the C_3v monomer found in the gas phase. Structures are also reported for M₂[CrOCl₅] (M = Cs or Rb) and show a pseudo‐octahedral anion. Cs₂[CrOCl₅] adopts a K₂PtCl₆‐type structure with [CrOCl₅]^2– ions randomly orientated, but Rb₂[CrOCl₅] is orthorhombic with space group Pnma with a = 13.6471(7), b = 9.9175(5), and c = 6.9562(4) Å. Rietveld refinement of the data on the rubidium salt gave Cr–O = 1.628(1), Cr–Cl_transO = 2.652(7), Cr–Cl_transCl = 2.239(8)–2.342(3) Å. Corresponding Cr^V oxide bromide species do not form.     

二安替比林基－（3－羟基）苯基甲烷光度法测定痕量钒

合成和鉴定了二安替比林基－（３－羟基）苯基甲烷（ＤＡｍＨＭ），研究了它与Ｖ（ｖ）的显色反应。在磷酸介质中，在Ｍｎ（Ⅱ）和吐温－４０存在下，ＤＡｍＨＭ与Ｖ（Ｖ）生成橙黄色化合物，λ＿（ｍａｘ）＝４８０ｎｍ，ε＝１．０３×１０￣６Ｌ·ｍｏｌ￣（－１）·ｃｍ￣（－１），Ｖ（ｖ）量在０．２～１．２ｕｇ／２５ｍＬ间符合比尔定律，体系灵敏度高，稳定性好，用于中草药中痕量钒的测定，结果满意。     

TiO_2空心微球负载钒、铈催化剂的制备及其对氯苯催化燃烧性能研究

采用水热法制备TiO2空心球,以TiO2空心球为载体,采用等体积浸渍法分别制备了不同V负载量(3%~10%)的V2O5/TiO2和稀土改性后的V2O5-CeO2/TiO2催化剂,利用XRD,SEM,EDS,TEM对TiO2空心球及V2O5-CeO2/TiO2催化剂进行了表征,结果表明,空心球TiO2分散性良好,粒径在1.5μm左右,且其为锐钛矿结构,负载的V和大部分的Ce均匀分散在TiO2空心球体内部或者表面而未破坏TiO2空心球结构。考察了催化剂对氯苯的催化燃烧性能,活性评价结果表明当V负载量在5%时,V2O5/TiO2催化剂对氯苯催化燃烧性能最佳,在掺杂10%的稀土Ce后,催化燃烧氯苯的活性得到明显提高。