八—4—(四氢糠氧基)双酞菁衍生物钕(Ⅲ)、铕(Ⅲ)的合成和LB膜的气敏性

八—４—（四氢糠氧基）双酞菁衍生物钕（Ⅲ）、铕（Ⅲ）的合成和ＬＢ膜的气敏性张引＊辛春梅王丹（吉林省教育学院化学系，长春１３００２２）梁冰洁＊＊陈文启席时权（中科院长春应用化学研究所，长春１３００２２）关键词：希土双酞菁衍生物ＬＢ膜气敏性荧光性紫外可见...     

Single cell manipulation, analytics, and label-free protein detection in microfluidic devices for systems nanobiology

Single cell analytics for proteomic analysis is considered a key method in the framework of systems nanobiology which allows a novel proteomics without being subjected to ensemble-averaging, cell-cycle, or cell-population effects. We are currently developing a single cell analytical method for protein fingerprinting combining a structured microfluidic device with latest optical laser technology for single cell manipulation (trapping and steering), free-solution electrophoretical protein separation, and (label-free) protein detection. In this paper we report on first results of this novel analytical device focusing on three main issues. First, single biological cells were trapped, injected, steered, and deposited by means of optical tweezers in a poly(dimethylsiloxane) microfluidic device and consecutively lysed with SDS at a predefined position. Second, separation and detection of fluorescent dyes, amino acids, and proteins were achieved with LIF detection in the visible (VIS) (488 nm) as well as in the deep UV (266 nm) spectral range for label-free, native protein detection. Minute concentrations of 100 fM injected fluorescein could be detected in the VIS and a first protein separation and label-free detection could be achieved in the UV spectral range. Third, first analytical experiments with single Sf9 insect cells (Spodoptera frugiperda) in a tailored microfluidic device exhibiting distinct electropherograms of a green fluorescent protein-construct proved the validity of the concept. Thus, the presented microfluidic concept allows novel and fascinating single cell experiments for systems nanobiology in the future.     

Cu(phen)2+2和Cu(bpy)2+2与6-巯基嘌呤、腺嘌呤相互作用的研究

在ｐＨ为７．０的磷酸盐缓冲溶液中，用荧光光谱、紫外光谱、电化学及紫外光谱电化学等方法研究了铜配合物与６－巯基嘌呤、腺嘌呤的相互作用．结果表明，Ｃｕ（ｐｈｅｎ）２＋２和Ｃｕ（ｂｐｙ）２＋２与６－巯基嘌呤、腺嘌呤发生了相互作用，但作用程度不同．根据荧光光谱实验数据计算出Ｃｕ（ｐｈｅｎ）２＋２和Ｃｕ（ｂｐｙ）２＋２与６－巯基嘌呤、腺嘌呤的配位比均为１∶１；它们与６－巯基嘌呤作用的配位常数分别为２．２３×１０４Ｌ／ｍｏｌ和６．１１×１０４Ｌ／ｍｏｌ；与腺嘌呤作用的配位常数分别为１．９５×１０４Ｌ／ｍｏｌ和５．１２×１０４Ｌ／ｍｏｌ．电化学实验也获得了相近的结果．这为解释Ｃｕ（ｐｈｅｎ）２＋２和Ｃｕ（ｂｐｙ）２＋２与ＤＮＡ的作用机理及作用部位提供了有益的信息     

A simple and simultaneous determination of acyclovir and ganciclovir in human plasma by high-performance liquid chromatography

A simple high-performance liquid chromatographic method was developed for the simultaneous determination of the therapeutic levels of acyclovir and ganciclovir in human plasma. After precipitation of plasma proteins with 6% perchloric acid, acyclovir and ganciclovir were simultaneously determined by reversed-phase chromatography with spectophotometric detection at 254 nm. The peak heights for acyclovir and ganciclovir were linearly related to their concentrations ranging from 0.063 to 2.080 micro g/mL. The recovery was 100.48-102.84% for acyclovir and 99.26-103.07% for ganciclovir. The intra- and inter-day relative standard deviation values were in the range 0.186-8.703% for acyclovir and 0.137-6.424% for ganciclovir. The detection limits for both compounds were 0.01 micro g/mL determined as the signal-to-noise ratio of 3. The present method is applicable to therapeutic monitoring during antiviral medication.     

Synthesis of silanized polyether urethane hybrid systems. Study of the curing process through hydrogen bonding interactions

Different types of silanized polyurethanes (SPUR) were prepared in two ways: the first type (a), by reacting a polyether diol with an isocyanatesilane and the second type (b) by reacting it with diisocyanate (IPDI) and afterwards with aminosilane. These systems are able to cure with atmospheric moisture and, as a consequence, a tridimensional hybrid structure is formed where the inorganic and organic phases are bonded with covalent bonds. The evolution of the curing process in both systems has been monitored by means of Fourier transform infrared spectroscopy, through the changes observed in the carbonyl stretching vibration region. The results obtained show that the SPURs of kind (b) present stronger hydrogen bonding interactions as a consequence of urea groups present in the final structure. Moreover, given the proximity of both urethane and urea groups to alkoxysilane end groups, during the alkoxysilane curing process these groups are forced to approximate themselves even further and therefore the reticulation process leads to an increase of the self association of urethane and urea groups.Finally, DSC has been used to measure T_g values of the systems studied before and after the curing process. The obtained results have confirmed the main conclusions obtained in FTIR analysis.     

Synthesis of New Reagent 2‐Acetylthiophenethiocynate and its Use in Extraction of Pt(IV) Spectrophotometrically

2‐Acetyl thiophenethiocynate (ATT) was synthesized and its characterization study was carried out using elemental analysis, IR and NMR techniques. The new reagent was proposed as an extractant for the development of the extractive spectrophotometric method for determination of Pt(IV) metal. The reagent complexes with the metal to produce a yellow colored complex which was then extracted into ethyl acetate at pH 11.2–11.6 having an absorption maxima at 400 nm. The thermal study showed that the extraction reactions are exothermic in nature with the reagent, and the stoichiometric ratio of Pt(IV) to 2‐acetyl thiophenethiocynate in the organic phase was 1:2. The method permits separation and determination of platinum from real and binary mixtures. The separation of Pt(IV) from bivalent metal ions has been also studied.     

Chromatographic Analysis of Trans Resveratrol in Italian Wines: Comparisons between FL, UV and MS Detection

Resveratrol (3,5,4′-trihydroxystilbene) is a phytoalexin that belongs to the group of stilbenes, known to occur in grapes and consequently in grape products. Its presence in wine is an important qualitative parameter because of the several beneficial effects on human health. The aim of this work is the development of a high-performance liquid chromatographic (HPLC) method for the determination of trans resveratrol in wines, and comparisons between the results obtained by different detection techniques: UV-vis spectroscopy, fluorescence spectroscopy and mass spectrometry. Resveratrol is analysed on a C-18 column using gradient elution. The method permits direct injection of sample, revealing to be time-saving, overcoming the need of sample pre-treatment steps. Detection limits were 154.8 ng mL⁻¹ by HPLC-UV, 118.0 ng mL⁻¹ by HPLC-FL and 48.0 ng mL⁻¹ by HPLC-MS. Trans resveratrol has been then quantified in a group of 52 wines derived from different Italian regions, cultivars and winemaking technologies by HPLC-UV.     

苯乙烯-异戊二烯两嵌段共聚物溶液的dn/dc和紫外吸收光谱

本文研究了苯乙烯-异戊二烯两嵌段共聚物在CHCl_3中的折光指数浓度增量(dn/dc)和紫外吸收光谱。嵌段共聚物dn/dc具有很好的加和性,可以测定嵌段共聚物的组成。紫外吸收光谱的结果表明,除低苯乙烯含量的样品外,其它嵌段共聚物都显示明显的紫外增色性(UV hyperchromism)。因此UV和UV-RI双检测GPC不会得到可靠的嵌段共聚物组成数据。这种增色现象与其特征的紫外吸收谱图紧密关联     

Kinetic aspects of the Diels-Alder reaction between poly(styrene-co-furfuryl methacrylate) and bismaleimide

The crosslinking Diels-Alder reaction between styrene-furfuryl methacrylate copolymer samples (poly(ST-co-FM)) and bismaleimide (BM) at 25 °C in chloroform was studied by following the decay in UV absorbance of the maleimide (MI) group at 320 nm. Reaction conditions were changed by using copolymers with different mole fraction of FM, F_FM, and by employing different initial molar ratios of reactants (furan group within FM and MI group within BM). Second order kinetics were obeyed. ¹³C NMR spectra showed that, even when all reactants had been converted to an insoluble crosslinked network, unreacted MI groups remained, presumably in the form of singly reacted pendant BM molecules. The fractions of MI groups remaining unreacted were found to be 0.49, 0.34 and 0.22 for FM:MI mole ratios in the initial mixture of 2, 1 and 0.5 respectively, when using a copolymer of F_FM=0.1354. An attempt was also made to follow the kinetics of network formation by ¹³C NMR spectroscopy, using the peak areas for reacted and unreacted MI and FM groups, but many of the findings were subject to some uncertainty for reasons, which are discussed. However, because the peak areas were considered reliable for unreacted MI groups, the rate constant, k, was evaluated, thereby. Overall using UV and NMR the values of k lay within the interval (0.8-3.6) × 10⁻⁵ dm³ mol⁻¹ s⁻¹.     

Determination of diethanolamine or <Emphasis Type="Italic">N</Emphasis>-methyldiethanolamine in high ammonium concentration matrices by capillary electrophoresis with indirect UV detection: application to the analysis of refinery process waters

Alkanolamines such as diethanolamine (DEA) and N-methyldiethanolamine (MDEA) are used in desulfurization processes in crude oil refineries. These compounds may be found in process waters following an accidental contamination. The analysis of alkanolamines in refinery process waters is very difficult due to the high ammonium concentration of the samples. This paper describes a method for the determination of DEA in high ammonium concentration refinery process waters by using capillary electrophoresis (CE) with indirect UV detection. The same method can be used for the determination of MDEA. Best results were achieved with a background electrolyte (BGE) comprising 10 mM histidine adjusted to pH 5.0 with acetic acid. The development of this electrolyte and the analytical performances are discussed. The quantification was performed by using internal standardization, by which triethanolamine (TEA) was used as internal standard. A matrix effect due to the high ammonium content has been highlighted and standard addition was therefore used. The developed method was characterized in terms of repeatability of migration times and corrected peak areas, linearity, and accuracy. Limits of detection (LODs) and quantification (LOQs) obtained were 0.2 and 0.7 ppm, respectively. The CE method was applied to the determination of DEA or MDEA in refinery process waters spiked with known amounts of analytes and it gave excellent results, since uncertainties obtained were 8 and 5%, respectively.