足球分子及有关碳笼的电子结构

本文评述了激光气化产生的碳原子簇的电子结构和活性。足球分子具有球面芳香性。我们用INDO/2和INDO/CI系列方法。研究了足球分子及其异构体的电子结构和UV谱。足球分子的计算结果是只有一条低频带(366.4nm),与实验结果(386.0nm)符合得很好。     

La2CaB10O19∶Ce3+在VUV-Vis范围的发光性质研究

通过研究La2CaB10O19∶Ce3+在VUV-Vis范围的光谱, 发现Ce3+在La2CaB10O19中共有两种格位, 分别取代了十配位的La3+和八配位的Ca2+, 从而发射光谱中没有出现特征的双峰, 而出现了峰值约位于307, 330和356 nm的3个发射峰.由于在低对称性晶体场中d轨道的分裂, 激发光谱中位于194, 224, 243, 260, 274和318 nm的峰是由两个格位的Ce3+的f-d跃迁引起的.Ce3+占据两个格位, 可以通过以Eu3+为荧光探针的发射光谱中出现的两个5D0-7F0跃迁得到验证.峰值位于162 nm的激发谱带是基质吸收带, 与基质禁带宽度相对应.通过计算, 不排除其中包含O2-→Ce3+的电荷迁移带的可能性.     

Decomposition of 1-(ω-aminoalkanoyl)guanidines under alkaline conditions

The decomposition of some N^G-(ω-aminoalkanoyl)argininamides, which are key intermediates for the preparation of radiolabeled and fluorescent neuropeptide Y receptor ligands, prompted us to synthesize a small series of simple 1-(ω-aminoalkanoyl)guanidines, and to investigate these model compounds for stability in alkaline buffers. The degradation of acylguanidines was monitored by time resolved UV spectroscopy. The most labile compound, 1-(5-aminopentanoyl)guanidine, decomposed with a half life of 19 s to yield piperidin-2-one (pH 10.4 at 25 °C). In contrast the half life of 1-(6-aminohexanoyl)guanidine is 7.7 h, which is comparable to the hydrolysis of acetylguanidine (t_1/2 = 9.6 h) in alkaline solution.     

Photoinitiators for UV and visible curing of coatings: Mechanisms and properties

The radiation curing industry is one of the most rapidly developing fields in the entire coatings industry. The low toxicity, cheapness, speed, control and ease of formulation and operation are some of the main advantages of this growing technology. UV and/or visible light radiation is used to induce photochemical polymerization or crosslinking of a monomer, oligomer or prepolymer formulation containing a certain type of unsaturation, such as an acrylic group, and an appropriate initiator. The latter is used to absorb the light energy and transform it into active species, such as radicals or ions, capable of inducing such reactions. Applications extend to general coatings for paper, board, wood, tapes, compact discs and holograms, inks, photoresists for imaging processes and adhesives for welding and sealing in electronic circuit boards. The photoinitiator is the key to the control of these processes and, in recent years, has seen many new developments. These include the need for water-soluble, co-reactive and polymeric structures with low migration rates, as well as cheaper UV/ visible sensitizers with enhanced speed. New and effective cationic systems are also on the scene and, although expensive, are attracting significant academic and commercial interest.     

Thermal and mechanical properties of UV irradiated collagen/chitosan thin films

The thermal and mechanical properties of collagen/chitosan blends before and after UV irradiation have been investigated using thermal analysis and mechanical (Instron) techniques. Comparisons were made with the thermal and mechanical properties of both collagen and chitosan films. Air-dried collagen, chitosan and collagen/chitosan films were exposed to UV irradiation (wavelength 254 nm) for different time intervals. Thermal properties of collagen/chitosan blends depend on the composition of the blend and are not significantly altered by UV irradiation.Mechanical properties such as ultimate tensile strength and ultimate percentage of elongation were much better for collagen films than for collagen/chitosan films. The results have shown that the mechanical properties of the blends were greatly affected by the duration of UV irradiation. Ultimate tensile strength and ultimate percentage elongation decreased after UV irradiation of the blend. Increasing UV irradiation leads to an increase in Young's modulus of the collagen/chitosan blend.     

A Photophysical Study of Terphenyl Core Oligosulfonimide Dendrimers Exhibiting High Steady‐State Anisotropy

The photophysical properties of three dendrimers containing a p‐terphenyl core with appended sulfonimide branches of different size and n‐octyl chains have been investigated in dichloromethane solution. In the dendrimer absorption spectra contributions from both the branches and the core are clearly identified. The fluorescence spectra show only the characteristic fluorescence of the terphenyl unit. Energy transfer from the appended chromophoric groups to the core does not occur. In the dendrimers, the terphenyl core exhibits a very high fluorescence quantum yield (ca. 0.75) and a short emission lifetime (0.8 ns). These properties allowed investigations of the fluorescence depolarization caused by rotation of the dendrimers. The dendrimers show a very high steady‐state anisotropy in dichloromethane solution at room temperature (0.24 for the largest one), compared to that of the parent terphenyl under the same experimental conditions (<0.01) and in rigid matrix (0.33). Both the n‐octyl chains and the sulfonimide branches play important roles to slow down the molecular rotation.     

Synthesis, structures and spectroelectrochemistry of methyl-substituted bis(η-indenyl)iron(II) complexes

Several new methyl-substituted indenyl ferrocenes were prepared by metathesis reactions of the indenide (generated from the appropriate indene with BuLi) with ferrous chloride. The indenides used to prepare new ferrocenes were: 2-methyl-, 1,2-dimethyl-, 4,7-dimethyl-, 1,4,7-trimethyl-, and 1,3,4,7-tetramethyl-indenide. These indenyl ferrocenes, along with those prepared from indenide, 1-methylindenide, and 1,3-dimethylindenide, were then characterized by ¹H and ¹³C NMR, UV/visible spectroscopy, cyclic voltammetry and mass spectrometry. The cyclic voltammetry showed an additive relationship between oxidation potential and the number of methyl groups which is also position-dependent, whereas the UV/visible spectra showed two absorptions essentially unaffected by methyl substitution. Additionally, bis(2-methylindenyl)iron(II) and bis(4,7-dimethylindenyl)iron(II) were characterized by X-ray crystallography.     

UV stabilizers bonded to transition metals: Synthesis and X-ray structure of 2-(2′-hydroxyphenyl)benzotriazole-oxovanadium(IV) and -dioxomolybdenum(VI) complexes

The UV-stabilizer 2-(2′-hydroxy-5′-methylphenyl)benzotriazole (Tinuvin P, LH) has been used as a monoanionic bidentate ligand for complexing oxocations. Displacement of acacH from [VO(acac)₂] and [MoO₂(acac)₂] gave [*VO(acac)₂*(μ-L)] (2) and [cis-O₂Mo(acac)L] (3) respectively, as crystalline compounds. Their structure has been determined by an X-ray analysis showing the structural changes occurring upon coordination. The UV spectrum of Tinuvin P is significantly affected by complexation.     

Quantum chemical modeling for 157 nm photolithography

In its continuing quest for smaller length scales, the electronics industry plans to introduce 157 nm as the next lithographic wavelength. Accordingly, there is a pressing need to develop photoresists that are more transparent, and pellicles that are both more transparent and more durable. With the advent and popularization of time-dependent density functional theory (TD-DFT), we now have a practical quantum chemical method for calculating excitation energies and transition moments in the vacuum ultraviolet (VUV) which can greatly assist in the scouting of highly transparent materials. We have performed TD-DFT calculations for a broad variety of fluorinated molecules and we will report calculated VUV photoabsorption spectra for a large family of model fluorohexanes. These calculations, which span a range from 1-fluorohexane to CH₃CF₂CF₂CF₂CF₂CH₃, illustrate some of the principles one may use to design low absorption polymeric materials.     

Sol–gel preparation and properties of hydroxypropylcellulose–titania hybrid thin films

Hydroxypropylcellulose (HPC)–titania hybrid thin films were prepared by sol–gel method where titanium tetraisopropoxide Ti(OC₃H₇ ⁱ )₄ was hydrolyzed under acidic conditions in the presence of HPC, followed by dip-coating and drying at 120 °C for 24 h. The viscosity average molecular weight of HPC was 55,000–70,000 or 110,000–150,000, and the TiO₂/(HPC + TiO₂) mass ratio ranged from 0 to 1, which was calculated on the assumption that all Ti(OC₃H₇ ⁱ )₄ is converted into TiO₂. The films were 0.35–1.0 μm thick, transparent in visible region and opaque in ultraviolet (UV) region, where the optical absorption coefficient in UV region increased with increasing titania content. The refractive index increased with increasing titania content, ranging from 1.6 to 1.8 for the hybrid thin films. The pencil hardness increased from 6B to 5H, the durability in hot water significantly increased and the contact angle of water on films increased from 35° to 89° with increasing titania content. Crack-free films could be deposited on organic polymer substrates irrespective of titania or HPC contents, where cracking did not occur at higher HPC contents even when the substrate was bent.