Capacity Efficiency and Restorability of Path Protection and Rerouting in WDM Networks Subject to Dual Failures

Resilient optical networks are predominately designed to protect against single failures of fiber links. But in larger networks, operators also see dual failures. As the capacity was planned for single failures, disconnections can occur by dual failures even if enough topological connectivity is provided. In our approach the design of the network minimizes the average loss caused by dual failures, while single failures are still fully survived. High dual failure restorability is the primary aim, capacity is optimized in a second step. For WDM networks with full wavelength conversion, we formulate mixed integer linear programming models for dedicated path protection, shared (backup) path protection, and path rerouting with and without stub-release. For larger problem instances in path rerouting, we propose two heuristics. Computational results indicate that the connectivity is of much more importance for high restorability values than the overall protection capacity. Shared protection has similar restorability levels as dedicated protection while the capacity is comparable to rerouting. Rerouting surpasses the protection mechanisms in restorability and comes close to 100% dual failure survivability. Compared to single failure planning, both shared path protection and rerouting need significantly more capacity in dual failure planning.     

AT89C51单片机在电话远程控制器中的应用

设计以AT89C51单片机作为控制核心的电话远程控制器,重点介绍该控制器的各模块组成、原理及具体实现的电路,该控制器采用现有的电话线路进行通信,无需重新布线且通信距离不受限制,经实际运行表明,该控制器具有运行可靠、成本低、操作方便,适用性强的特点、可以广泛应用于城市社区,具有较大的推广价值。     

一种新型弹载偶极子天线分析与设计

给出了一种新型结构的弹载偶极子天线,采用基于自补结构的蛇形振子作为辐射器,并用矩量法对振子结构进行优化,采用简化形式的锥形BALUN以实现平衡馈电。测试结果表面该天线具有良好的E面全向特性和宽带特性。主要分析了该天线的辐射特性,最后给出并分析了实测数据。该天线具有结构紧凑、馈电简单、带宽较宽、易于制作等优点。     

异步DS-CDMA系统中基于矩阵点除算法的DOA估计

针对异步DS-CDMA系统中的多用户环境,本文提出了一种低复杂度的DOA估计算法——矩阵点除算法。该算法通过对感兴趣信息的逐次分离,实现了DOA的逐路径估计。算法具有两方面显著优势:(1)克服了传统的DOA估计算法在路径总数大于天线阵元数时不能工作这一缺陷:(2)避免了计算复杂的特征值分解运算,大大降低了算法复杂度。仿真实验验证了算法的有效性。     

嵌入式数字智能涡街流量计的设计开发

针对目前涡街流重计存在精度不高的问题，采用Toeplitz自相关矩阵近似的准牛顿算法，对涡街传感器输出信号进行数字信号处理。针对客户超低功耗的要求，开发设计以超低功耗的混合信号处理器(MSP430F149)为微处理器，以采用KS0713为控制器的LCD为液晶显示模块，符合HART总线协议的嵌入式智能涡街流量计。     

掺铒碲基光纤放大器最新研究进展

掺铒碲基光纤放大器(EDTFA)由于能同时在C L波段(1530-1610nm)或L波段(1580-1620nm)对光信号进行有效的放大，目前已成为通信领域内竞相开发的一种新型宽带光纤放大器，为此简单介绍了该放大器的研究历程，综述了其最新研究进展和应用情况。     

Signal Integrity: Fault Modeling and Testing in High-Speed SoCs

As we approach 100 nm technology the interconnect issues are becoming one of the main concerns in the testing of gigahertz system-on-chips. Voltage distortion (noise) and delay violations (skew) contribute to the signal integrity loss and ultimately functional error, performance degradation and reliability problems. In this paper, we first define a model for integrity faults on the high-speed interconnects. Then, we present a BIST-based test methodology that includes two special cells to detect and measure noise and skew occurring on the interconnects of the gigahertz system-on-chips. Using an inexpensive test architecture the integrity information accumulated by these special cells can be scanned out for final test and reliability analysis.     

改进型遗传算法在加载天线设计中的运用

遗传算法是一种全新的优化搜索方法，可以用来解决各种复杂的实际问题。针对简单型遗传算法的一些不足之处，介绍了一种改进型的遗传算法，并阐述了其在短波宽带集总加载天线优化设计中的运用。     

The Role of Test Protocols in Automated Test Generation for Embedded-Core-Based System ICs

Modular testing is an attractive approach to testing large system ICs, especially if they are built from pre-designed reusable embedded cores. This paper describes an automated modular test development approach. The basis of this approach is that a core or module test is dissected into a test protocol and a test pattern list. A test protocol describes in detail how to apply one test pattern to the core, while abstracting from the specific test pattern stimulus and response values. Subsequent automation tasks, such as the expansion from core-level tests to system-chip-level tests and test scheduling, all work on test protocols, thereby greatly reducing the amount of compute time and data involved. Finally, an SOC-level test is assembled from the expanded and scheduled test protocols and the (so far untouched) test patterns. This paper describes and formalizes the notion of test protocols and the algorithms for test protocol expansion and scheduling. A running example is featured throughout the paper. We also elaborate on the industrial usage of the concepts described.     

A Combined Antenna Array and Multi-User Detection DS-CDMA Receiver in Single-Path and Multi-Path Fading Channels

An adaptive antenna array is incorporated into a decorrelatingmulti-user detector to effectively increase the DS-CDMA system capacity.Capacity improvement is due to beamforming gain, spatial diversity gain(assuming large angle spread), and the decorrelating effect. Thereceiver has been analyzed for the cases of sufficiently andinsufficiently spaced receiving antennas. The receiver consists of afront-end beamformer for every user in the cell and has knowledge of allusers' signature sequences. The beamformer estimates the desired userchannel vector, enhancing its signal and reducing the co-channelinterference from other directions. The multi-user detection, exploitingknowledge of other users, rejects those interferers whose arrival anglesare close to that of the desired user. The average uncoded Bit ErrorRate (BER) as a function of the number of in-beam active users, theaverage antenna Signal-to-Noise Ratio (SNR), and the number of receivingantennas is examined in both single-path and multi-path Rayleigh fadingchannels. Analysis shows an increase in system capacity proportional tothe number of receiving antennas.