Thermal conductivity, dislocation density and GaN device design

The performance of high power transistor devices is intimately connected to the substrate thermal conductivity. In this study, the relationship between thermal conductivity and dislocation density is examined using the 3 omega technique and free standing HVPE GaN substrates. Dislocation density is measured using imaging cathodoluminescence. In a low dislocation density regime below 10⁵ cm⁻², the thermal conductivity appears to plateau out near 230 W/K m and can be altered by the presence of isotopic defects and point defects. For high dislocation densities the thermal conductivity is severely degraded due to phonon scattering from dislocations. These results are applied to the design of homoepitaxially and heteroepitaxially grown HEMT devices and the efficiency of heat extraction and the influence of lateral heat spreading on device performance are compared.     

Multiscale Finite Element Modeling of Arc Dynamics in a DC Plasma Torch

The dynamics of the electric arc inside a direct current non-transferred arc plasma torch are simulated using a three-dimensional, transient, equilibrium model. The fluid and electromagnetic equations are solved numerically in a fully coupled approach by a multiscale finite element method. Simulations of a torch operating with argon and argon–hydrogen under different operating conditions are presented. The model is able to predict the operation of the torch in steady and takeover modes without any further assumption on the reattachment process except for the use of an artificially high electrical conductivity near the electrodes, needed because of the equilibrium assumption. The results obtained indicate that the reattachment process in these operating modes may be driven by the movement of the arc rather than by a breakdown-like process. It is also found that, for a torch operating in these modes and using straight gas injection, the arc will tend to re-attach to the opposite side of its original attachment. This phenomenon seems to be produced by a net angular momentum on the arc due to the imbalance between magnetic and fluid drag forces.     

The stress driven instability in elastic crystals: Mathematical models and physical manifestations

Summary Equilibrium equations and stability conditions for the simple deformable elastic body are derived by means of considering a minimum of the static energy principle. The energy is supposed to be sum of the volume (elastic) and the surface terms. The ability to change relative positions of different material particles is taken into account, and appropriate natural definitions of the first and second variations of the energy are introduced and calculated explicitly. Considering the case of negligible magnitude of the surface tension, we establish that an equilibrium state of a nonhydrostatically stressed simple elastic body (of any physically reasonable elastic energy potential and of any symmetry) possessing any small smooth part of free surface is always unstable with respect to relative transfer of the material particles along the surface. Surface tension suppresses the mentioned instability with respect to sufficiently short disturbances of the boundary surface and thus can probably provide local smoothness of the equilibrium shape of the crystal. We derive explicit formulas for critical wavelength for the simplest models of the internal and surface energies and for the simplest equilibrium configurations. We also formulate the simplest problem of mathematical physics, revealing peculiarities and difficulties of the problem of equilibrium shape of elastic crystals, and discuss possible manifestations of the above-mentioned instability in the problems of crystal growth, materials science, fracture, physical chemistry, and low-temperature physics.     

分子筛笼内金属羰基簇合物的热稳定性研究

本实验采用戊马比妥钠诱发豚鼠和家兔急性心力衰竭模型，观察了舒心丸的治疗作用。结果表明，舒心丸ｉｖ能明显升高心衰豚鼠的心脏收缩幅度和心衰家兔的Ｂｐ，ＬＶＰ，ＬＶ±ｄｐ／ｄｔ和ＣＯ。其作用与哇巴因相似。     

碳酸及碳酸酯热消除反应的量子化学研究

用AM1方法研究了碳酸和碳酸酯的热消除反应．发现迁移基团R和基团R’共同制约这类吸热反应的活化能。     

Dicopper(I) oxalate complexes as molecular precursors for the deposition of copper compounds

The synthesis, characterization, and thermal decomposition behavior of dicopper(I) oxalato complexes L₄Cu₂(C₂O₄) (L = CNtBu (2a), CNCMe₂CH₂tBu (2b), CNC₆H₃Me₂-2,6 (2c)) is reported. 2c can be prepared in a straightforward manner by the reaction of stoichiometric amounts of Cu₂O and oxalic acid with four equivalents of CNC₆H₃Me₂-2,6, while those complexes with aliphatic isocyanides are better prepared from a copper(I) oxalato complex with alkine capping ligands (Me₃SiCCSiMe₃)₂Cu₂(C₂O₄) (1) via ligand exchange. Crystallographic and spectroscopic evidence for 2a-c confirms the anticipated dinuclear structure with the oxalate in a μ-1,2,3,4 bridging mode and an essentially σ-character of the terminal isocyanides. In solid form the complexes are stable at room temperature and can be handled in air for some time. Their decomposition was studied by thermal gravimetric analysis coupled with mass spectrometry, and the degradation pathway was shown to depend on the type of isocyanide capping ligand. Decomposition of 2a,b takes place between 150 and 200 °C to give CuCN in a clean process that involves isobutene elimination from the terminal ligands, with elimination of (CN)₂ and conversion to elemental copper at higher temperatures. Heating of 2c leads to CuO (and then to Cu₂O) via release of the intact isocyanide, CO₂, and CO in a well-behaved thermal process around 200-280 °C.     

Mechanical alloying of a thermoelectric alloy: Pb0.65Sn0.35Te

We report in this paper a study of the mechanical alloying (MA) process for the Pb_0.65Sn_0.35Te alloy. MA has been carried out in a high-energy planetary ball mill. The mechanism of formation has been studied from systematic analyses of mechanically alloyed powders using X-ray diffraction, differential scanning calorimetry and scanning electron microscopy. As it was already observed for the MA of PbTe, this synthesis is associated with an exothermic reaction between the elemental powders. The required time to reach an homogeneous phase Pb_0..65Sn_0.35Te is 31 h.     

Properties of ITO films prepared by reactive magnetron sputtering

Indium tin oxide (ITO) thin films were deposited by mid frequency pulsed dual magnetron sputtering using a metallic alloy target with 10 wt.% tin in an atmosphere of argon and oxygen. The aim of the work was to study the interdependence of structural, electrical and optical properties of ITO films deposited in the reactive and transition target mode, respectively. The deposition rate in the transition mode exceeds the deposition rate in the reactive mode by a factor of six, a maximum value of 100 nm·m min⁻¹ could be achieved. This corresponds to a static deposition rate of 200 nm min⁻¹. The lowest electrical resistivity of 1.1·10⁻³ Ω cm was measured at samples deposited in the high oxygen flow range in the transition mode. The samples show a good transparency in the visible range corresponding to extinction coefficients being below 10⁻². X-ray diffraction was used to characterise crystalline structure as well as film stress. ITO films prepared in the transition mode show a slightly preferred orientation in (211) direction, whereas films deposited in the reactive mode are strongly (222) oriented. Compared to undoped In₂O₃ all samples have an enlarged lattice. The lattice strain perpendicular to the surface is about 0.8% and 2.0% for films grown in the transition and the reactive mode, respectively. Deposition in the transition mode introduces a biaxial film stress in the range of −300 MPa, while stress in reactive mode samples is −1500 MPa.     

Synthesis, spectroscopic and thermal studies of the copper(II) aspartame chloride complex

Aspartame adduct of copper(II) chloride Cu(Asp)₂Cl₂·2H₂O (Asp=aspartame) is synthesized and characterized by elemental analysis, FT IR, UV/vis, ESR spectroscopies, TG, DTG, DTA measurements and molecular mechanics calculations. Aqueous solution of the green solid absorbs strongly at 774 and 367 nm. According to the FT IR spectra, the aspartame moiety coordinates to the copper(II) ion via its carboxylate ends, whereas the ammonium terminal groups give rise to hydrogen bonding network with the water, the chloride ions or neighboring carboxylate groups. The results suggest tetragonally distorted octahedral environment of the copper ions.     

AM1法研究乙烯与环己－1，3－二烯热加成反应

用ＡＭ１方法（采用非限制的Ｈａｒｔｒｅｅ－ＦｏｃｋＵＨＦ计算）研究乙烯与环己－１，３－二烯的热Ｄｉｅｌｓ－Ａｌｄｅｒ反应。结果表明反应是放热的且存在两条竞争的路径；协同反应的活化能以及双自由反应速度控制步骤的活化能分别为１１２．６６７ｋＪ／ｍｏｌ和７８．４０６ｋＪ／ｍｏｌ。