动脉中血液脉动流的一种分析方法

动脉中的血液流动被分解为平衡状态(相当于平均压定常流状态)和叠加在平衡状态上的周期脉动流,利用Fung的血管应变能密度函数分析血管壁在平衡状态下的应力-应变关系,确定相对于平衡状态血管作微小变形所对应的周向弹性模量和轴向弹性模量,并建立在脉动压力作用下相应的管壁运动方程,与线性化Navier-Stokes方程联立,求得血液流动速度和血管壁位移的分析表达式,详细讨论血管壁周向和轴向弹性性质差异对脉博波、血液脉动流特性以及血管壁运动的影响.     

固壁近旁Stokes流中粘性液滴的运动和变形

发展了一种模拟固壁近旁轴对称Stokes流中粘性液滴的运动和变形及直接计算固壁上应力的边界积分方法．用此方法对不同的液滴-固壁初始相对间距、粘度比、表面张力和浮力联合参数以及环境流动参数情况进行了数值实验．数值结果显示,由于环境流动和浮力的作用,随着时间的推进,液滴在轴向压缩,在径向拉伸．当环境流动的作用弱于浮力作用时,随着时间的推移,液滴上升并向上弯,固壁上由液滴运动所引起的应力不断减小．当环境流动的作用强于浮力作用时,随着时间的推移,液滴变得越来越扁．在这种情形,当大初始间距时,壁面上的应力随液滴的演变而增大;当小初始间距时,由环境流动、浮力及壁面对流动的较强作用的联合影响,此应力随液滴的演变而减小．由于液滴运动所引起的壁面应力的有效作用仅限于对称轴附近的一个小范围内,且此范围随液滴与固壁的初始间距增大而增大．应力的大小随初始间距增大而大为减小．表面张力对液滴变形有阻止作用．液滴粘性会减小液滴的变形和位置迁移．     

Surface adhesion between hexagonal boron nitride nanotubes and silicon based on lateral force microscopy

This study presents the surface adhesion between hexagonal boron nitride nanotube (BNNT) and silicon based on lateral manipulation in an atomic force microscope (AFM). The BNNT was mechanically manipulated by the lateral force of an AFM pyramidal silicon probe using the scan mechanism in the imaging mode. With a controlled normal force of the AFM probe and the lateral motion, the lateral force applied to the BNNT could overcome the surface adhesion between BNNT and silicon surface. The individual BNNT is forced to slide and rotate on the silicon surface. Based on the recorded force curve, the calculated shear stress due to surface adhesion is 0.5 GPa. And the specific sliding energy loss is 0.2 J/m². Comparing BNNTs and carbon nanotube (CNT), the shear stress and specific sliding energy loss of BNNT are an order of magnitude larger than that of CNT. Therefore, the results show that the surface adhesion between BNNT and silicon surface is higher than that of CNT.     

Effects of thermal annealing on structural and magnetic properties of thin Pt/Cr/Co multilayers

Thermal stability of thin Pt/Cr/Co multilayers and the subsequent changes in their structural, magnetic, and magneto-optical properties are reported. We observe CoCrPt ternary alloy phase formation due to annealing at temperatures about 773 K, which is accompanied by enhancement in the coercivity value. In addition, 360° domain wall superimposed on a monodomain like background has been observed in the pristine multilayer, which changes into a multidomain upon annealing at 873 K.     

Effect of concentration and particle size on nonlinearity of Au nano-fluid prepared by γ (Co) radiation

Nonlinear properties of Au nano-fluid prepared by γ-radiation method at different concentrations were investigated. Measurements of nonlinear refractive index and nonlinear absorption coefficient were carried out using a single beam Z-scan technique. A green CW laser beam operated at 532 nm was used as excitation source. The Au nano-fluid shows a good third order nonlinear response. The sign of the nonlinear refractive index is found to be negative and the magnitude is in the order of 10⁻⁷ cm²/W. This nonlinear effect increases as the concentration increases from 3.119 × 10⁻⁴ to 2.354 × 10⁻³ M which correspond to particle sizes of 4.0-30.5 nm, respectively. A good linear relationship was obtained between nonlinear refractive index and concentration. However the relationship between nonlinear refractive index and particle size was nonlinear behavior.     

Simultaneous Brownian motion of N particles in a temperature gradient

A system of N Brownian particles suspended in a nonuniform heat bath is treated as a thermodynamic system with internal degrees of freedom, in this case their velocities and coordinates. Applying the scheme of nonequilibrium thermodynamics, one then easily obtains the Fokker-Planck equation for simultaneous Brownian motion of N particles in a temperature gradient. This equation accounts for couplings in the motion as a result of hydrodynamic interactions between particles.     

Effect of microencapsulation using soy protein isolate and gum arabic as wall material on red raspberry anthocyanin stability,characterization, and simulated gastrointestinal conditions

This study involves microencapsulation of anthocyanin extract (AC) from red raspberry using a freeze drying technique involving ultrasonication of soy protein isolate (SPI), gum arabic (AG), and their combination. Analyses included microcapsule properties, encapsulation efficiency, antioxidant capacity using the DPPH assay, Fourier-transform infrared spectroscopy (FTIR), color, thermal stability, stability during storage, morphology, and simulated gastrointestinal conditions. Encapsulation efficiency (EE) ranged from 93.05% to 98.87% for all microcapsules. The morphology of microcapsules by scanning electron microscopy (SEM) indicated a broken glass shape, with mean size of microcapsules ranging from 21.07 ± 2.71 μm to 48.19 ± 2.33 μm using Mastersizer analyzer. A good relationship obtained between zeta potential (ZP) and FTIR spectrum indicated that there is a chemical cross linking interaction between wall material and core material. All microcapsules enhanced the thermal stability of AC in the temperature range 80–114 °C. Furthermore, AC retention (up to 48%) during storage at 37 °C for 60 days revealed that treatment H combination of SPI and AG was best. In addition, SPI and AG combination presented good release behavior under simulated gastrointestinal conditions compared with unencapsulated anthocyanin.     

Bending features of a sandwich panel with asymmetric structure under local loads

The bending characteristics of a composite panel with asymmetric layered structure under local surface loads are obtained. A refined version of the applied theory is developed using the analytical solution of the bending problem of a sandwich plate with arbitrary asymmetric structure under a point load. Local effects are investigated within the limits of a discrete model allowing for the specific character of elastic properties of a soft filler. The advantages of the solution are expressions of bending characteristics — layer curvatures, displacements, and stresses — in a closed form. It is shown that these characteristics can vary several times depending on the asymmetry parameters of the structure. Degeneration peculiarities of the solution, stemming from the slipping of layers or, otherwise, their rigid linking by the Kirchoff—Love hypothesis, as well as from account of the transverse shear and compression of the normal, are examined in line with the degeneration of geometric and physical parameters of the discrete model adopted. The results obtained are illustrated by curves and surfaces for the characteristics studied.Submitted for the 11th International Conference on the Mechanics of Composite Materials (Riga, June 11–15, 2000).Institute of Polymer Mechanics, Latvian University, Riga, LV-1006 Latvia. Translated from Mekhanika Kompozitnykh Materialov, Vol. 35, No. 6, pp. 717–742, November–December, 1999.     

Effect of Co2+ on the growth,optical properties and laser damage threshold of potential nonlinear optical l-alanine single crystal

Good transparent bulk single crystals of pure l-alanine (LA) and cobalt doped LA crystals have been synthesized and successfully grown by slow-cooling method from their aqueous solutions. The concentration of metal dopants in the mother solution with 0.5 mol% for cobalt was carried out individually and crystals were obtained with well defined morphology. The as grown metal doped and pure single crystals were characterized by single crystal XRD studies which confirm that the incorporation of metallic dopants has not changed the basic structure of the parent crystal. The absorption of these crystals was analyzed and the result confirms that they possess low absorption in the range 230–1100 nm. Fourier transform infrared (FTIR) spectroscopy was carried out to investigate the molecular vibrations of these crystals and to confirm the incorporation of the dopants. The thermal properties have been studied by TGA/DTA curves. The EDAX measurement and surface morphology were studied for pure and metal doped LA crystals. The second harmonic generation (SHG) signals were observed using Nd: YAG laser with fundamental wavelength of 1064 nm in pure and metal doped crystals. The laser damage threshold was measured for pure and metal doped LA crystals and also tested by using a Q-switched Nd: YAG laser showed enhanced LDT value for metal (Co²⁺) doped LA crystal compared to pure LA crystal due to the metallic substitutions thus proving their useful candidature for nonlinear optical applications.