Molecular Beam Mass Spectrometry System for Characterization of Thermal Plasma Chemical Vapor Deposition

A molecular beam mass spectrometry system for in situ measurement of the concentration of gas phase species including radicals impinging on a substrate during thermal plasma chemical vapor deposition (TPCVD) has been designed and constructed. Dynamically controlled substrate temperature was achieved using a variable thermal contact resistance method via a backside flow of an argon/helium mixture. A high quality molecular beam with beamtobackground signal greater than 20 was obtained under film growth conditions by sampling through a small nozzle (75 m) in the center of the substrate. Mass discrimination effects were accounted for in order to quantify the species measurements. We demonstrate that this system has a minimum detection limit of under 100 ppb. Quantitative measurements of hydrocarbon species (H, H₂, C, CH₃, CH₄, C₂H₂, C₂H₄) using Ar/H₂/CH₄ mixtures and silicon species (Si, SiH, SiH₂, SiCl, SiCl₂, Cl, HCl) using Ar/H₂/SiCl₄ mixtures were obtained under thermal plasma chemical vapor deposition conditions.     

Combined use of high resolution TGA with the isoconversion method: Kinetic analysis of the thermal dehydration of KNbWO6·H2O

In the present study was combined the use of high resolution TGA with the isoconversion method, giving us a suitable methodology for determining the stages that occur during a reaction, and providing further insights about the kinetics of the processes involved. As a model reaction was used the thermal dehydration of KNbWO₆·H₂O. The results shown that the dehydration process is controlled by internal water diffusion (intra-crystallite); with activation energy values between 43 and 36 kJ/mol. This value is consistent with a diffusion mechanism dominated by van der Waals attractions. The estimated kinetic parameters are supported with a structural analysis, that suggest lower dimensionality character for water diffusion due to the specific orientations of 〈1 1 0〉 open channels in the pyrochlore framework. This would explain why the two-dimensional (D2) mechanism appears to be the most probable.     

A model for thermal degradation of hybrid nanocomposites

A model is developed for thermal degradation of polymer nanocomposites. A composite is thought of as an equivalent network of linear chains with attached side-groups. Thermal degradation is treated as combination of (i) binary scission (fragmentation) of backbone chains, and (ii) detachment of side-groups and their subsequent annihilation (diffusion to the surface of a sample and desorption). An explicit solution is derived for the kinetic equation. This solution involves three adjustable parameters that are found by fitting observations on isotactic polypropylene reinforced with carbon nanofibres. Good agreement is demonstrated between the experimental data and the results of numerical simulation.     

Stability of workroom air volatile organic compounds on solid adsorbents for thermal desorption gas chromatography

The storage stability of the occupationally frequently occurring compounds, methylethylketone, methylisobutylketone, benzene, toluene, tetrachloroethylene, n-butylacetate, -pinene, β-pinene, limonene and n-decane, has been investigated on the adsorbents Tenax TA, Chromosorb 106 and Carbotrap using thermally desorbable tube type samplers, commonly utilized in ambient and workroom atmospheric measurements. Fifty and 500 ng of each compound were loaded on the various adsorbents tubes, stored at both ambient (20 °C) and refrigerated (4 °C) temperatures and analysed by means of thermal gas chromatography with mass spectrometric detection on days 0, 7, 14 and 28 after exposure. A 90% storage recovery was chosen as acceptance criteria for storage stability, and statistical testing by Student's t-test, analysis of variance and Bonferroni post hoc tests were employed to investigate the effect of the categorical variables storage time, storage temperature and analyte loading on the different adsorbents. Chromosorb 106 showed the overall best behaviour with recoveries of 90% or better for all analytes during the 28-day test period. Tenax TA and Carbotrap yielded lower recoveries and were more influenced by variations in storage time, storage temperature and analyte loading. Refrigerated temperatures were best avoided for storage on Tenax TA, but may increase the recovery of some compounds on Carbotrap (e.g. n-butylacetate). The blank build-up on the adsorbents was also investigated, and Carbotrap and Tenax TA showed no signs of artefact development over time. Chromosorb 106, however, contained inherently more artefacts that build up over time, which in spite of the excellent storage capability, may limit its use in field studies where long storage times are normal.     

Enthalpic interaction coefficients of formamides dissolved in N,N-dimethylformamide

Enthalpies of dilution of formamide, N-methylformamide, N-ethylformamide, N-propylformamide, N-butylformamide, N-pentylformamide, N,N-diethyl-formamide, N,N-dipropylformamide, N,N-dibutylformamide, and N,N-dipentyl-formamide dissolved in N,N-dimethylformamide as solvent have been measured calorimetrically at 25°C. The results are interpreted in terms of the McMillan-Mayer theory. Enthalpic interaction parameters are obtained for pairs, triplets, and in some cases, quadruplets of solute molecules. In general, the enthalpic pair interaction coefficients are negative, whereas the triplet coefficients are positive. The interaction enthalpies are positive only for N-methylformamide and formamide. The magnitudes of the enthalpic pair and triplet interaction coefficients increase with increasing number of C atoms in the N-alkyl groups. The results for the formamides presented in this paper are compared with those for corresponding acetamides published earlier. Although the trends are comparable, distinct differences are observed. The contribution of the -CH₃ group at the CO side of the dialkylacetamides to the enthalpic interaction coefficients appears to be negligible. The same is true for -CH₂ groups at the NH side of a number of amides and related compounds. The enthalpic pair interaction coefficients of the mono-N-alkylsubstituted formamides show a shift of about 100 J-kg-mol^–2 as compared with isomeric N-alkylacetamides. This is discussed in terms of the difference in proton donating and accepting ability of several types of amide molecules. It is concluded that substitution effects should be incorporated in additivity models for these type of systems.     

2，2＇－偶氮二异丁酸二甲酯的合成及其热分解反应的研究

本文研究了２，２＇－偶氮二异丁酸二甲酯的合成及其在甲苯、二甲苯中的热分解反应动力学，得到了其热分解反应速度常数与反应温度的关系式：Ｋ＿ｄ＝１．６３×１００￣（－１４）ｅｘｐ（－１２３．３ＫＪ／ＲＴ）２，２＇－偶氮二异丁酸二甲酯作为苯乙烯自由基聚合的引发剂，其单体转化率随引发剂用量的增加而增高，产物分子量则随之下降；引发剂用量在５％以上时，可得到分子量低于１０￣３的含有酯基端基的聚合物。     

Thermodynamics of mixed electrolyte solutions. XI. An isopiestic study of the quaternary system NaCl−KCl−CaCl2−H2O at 25°C

Osmotic and activity coefficients in the aqueous quaternary system sodium chloride-potassium chloride-calcium chloride were derived from isopiestic measurements at 25°C. The isopiestic data were treated by the various procedures of Scatchard, Friedman, and Reilly, Wood, and Robinson. The results obtained showed good agreement with those obtained by pseudo-ternary transforms. Interaction parameters obtained indicated the preponderance of pairwise interactions. Excess Gibbs free energies of mixing were calculated.     

Kinetic modelling of the thermal oxidation of polyisoprene elastomers. Part 2: Effect of sulfur vulcanization on mass changes and thickness distribution of oxidation products during thermal oxidation

Thermal oxidation of sulfur vulcanized polyisoprene samples was studied by gravimetry and IR mapping of carbonyl groups (to determine the oxidized layer thickness (TOL)) at temperatures ranging from 60 to 150 °C in air. Oxidation appears noticeably lower than that for the starting non-vulcanized polyisoprene, revealing a stabilizing effect of sulfur-containing species. After a short period where mass loss presumably due to water evaporation predominates, the sample mass increases until a plateau corresponding to 6.3% (at 60 °C) to 0.5% (at 140 °C) mass gain. Practically no weight gain (∼0.1%) was observed at 150 °C. The mass uptake is due to oxygen grafting to the chains. TOL varies from about 4.6 mm (70 °C) to about 1 mm (150 °C).A kinetic model, derived from a mechanistic scheme of radical chain oxidation including stabilizing events due to hydroperoxide reduction by sulfur-containing groups and taking into account the diffusion-reaction coupling, was established and numerically resolved. The model predictions for mass changes and TOL values are in good agreement with experimental data.     

Peculiarities of changes of some physicomechanical characteristics of monoisotopes B, B and natural β-boron

Real structure and some physicomechanical characteristics of the samples of natural beta-rhombohedral boron B as well as of its ¹⁰B and ¹¹B monoisotopes have been studied. It was shown that the influence of ¹⁰B and ¹¹B isotopes on physicomechanical properties of boron had a different character. In particular, the samples enriched with ¹¹B had high values of microhardness, shear modulus (SM) and elastic limit if compared to those of boron, while the samples enriched with ¹⁰B monoisotopes were characterized with high values of thermal expansion coefficient (TEC) and thermal conductivity; lattice parameters a and c increased by the sequence: ¹¹B, B, ¹⁰B. It was established that TEC, thermal conductivity, microhardness, SM and shear elastic limit increased in all samples at annealing for 5 h at 1500 °C regardless of isotope content.