pH,Definition and measurement at high temperatures

In this review paper, the NBS scale and its limitations are briefly discussed. The magnitude of liquid junction potentials and some calculated values are presented. The use of a molality scale for hydrogen electrode concentration cells at high temperatures is described, and results from measurements on ionization equilibria are summarized. Use of this scale is also recommended for certain circumstances with cells without liquid junction. As an alternative activity scale, use of the Pitzer ion-interaction treatment for ions is recommended for special cases. Finally, reference data are presented for _±HCl in HCl(aq) to 350°C and (HCl+NaCl)(aq) to 200°C that were derived by use of the Pitzer ion-interaction treatment.Presented at the Second International Symposium on Chemistry in High Temperature Water, Provo, UT, August 1991.     

Phase Analysis of the Binary System of Cryolite (Na3AlF6) and Sodium Metasilicate (Na2SiO3)

The phase analysis of cryolite (Na₃AlF₆) and sodium metasilicate (Na₂SiO₃) was performed by thermal analysis. The eutectic system with a region of two immiscible substances at a concentration of Na₂SiO₃ between 42.8 and 46.3 mol‐% was identified and the eutectic temperature determined to (886±2) °C. Based on the results of mass‐loss measurements, it was assumed that the introduced Na₂SiO₃ reacts with Na₃AlF₆ due to the formation of some nonvolatile stable compounds. The stable reaction products were identified by X‐ray diffraction analysis and IR spectroscopy of the spontaneously cooled samples, which established the formation of NaF and stable amorphous aluminosilicate compounds.     

Two-Temperature Transport Coefficients in Argon–Hydrogen Plasmas—I: Elastic Processes and Collision Integrals

The calculation of two-temperature transport coefficients in an argon–hydrogen plasma at atmospheric pressure is performed using a new theory of two-temperature transport properties recently presented. The latter takes into account the coupling between electrons and heavy species, coupling neglected in the already existing theories of Devoto and Bonnefoi. Transport coefficients are calculated at two-temperatures, the kinetic temperature of electrons T_e being different from that of heavy species T_h. This paper is divided into two parts. The first one is related to elastic processes and its aim is to compare the results obtained with this new theory for viscosity , translational thermal conductivities ^tr _e and ^tr _h and electrical conductivity with the previous results of Bonnefoi. The composition is calculated with the modified equilibrium constant of van de Sanden et al. and the most recent interaction potential are discussed. As it could be expected the electron translational thermal conductivity and the electrical conductivity calculated when taking into account or not the coupling between electrons and heavy species show non-negligible discrepancies. Besides this comparison, the results also show the drastic influence of the non-equilibrium parameter =T_e/T_h on the values of , , ^tr _e, and ^tr _h.     

Thermal analysis and thermal expansion studies on high density YBa2−xLaxCu3O7−δ, 0x0.2

The compositions in the YBa_2−xLa_xCu₃O_7−δ (0x0.2) system were prepared by the solid state reaction, employing a novel high-temperature oxygen sintering route. The modified sintering route yields dense slab like microstructures with large grains. The decomposition (incongruent melting) temperature of the YBa₂Cu₃O_7−δ (Y-123) phase was found to shift to higher temperatures with increasing oxygen partial pressure and lanthanum content. Structure remained orthorhombic up to x=0.2 with a decrease in the orthorhombic strain ((b−a)/b). Iodometric titration indicated a systematic increase in the oxygen content with increasing lanthanum content. Thermo-gravimetric studies in various oxygen partial pressures revealed that the oxygen diffusion in to the YBa₂Cu₃O_7−δ (δ>0.5) lattice is an exothermic event and takes place at temperatures not less than 573 K. High-temperature thermal-expansion measurements in air indicated that the nonlinearity in thermal expansion behaviour was reduced by the substitution of lanthanum.     

A Three-Dimensional Two-Phase Model for Thermal Plasma Chemical Vapor Deposition with Liquid Feedstock Injection

In this paper, a comprehensive model for thermal plasma chemical vapor deposition (TPCVD) with liquid feedstock injection is documented. The gas flow is assumed to be steady, of a single temperature. Radiation and charged species contributions are excluded, but extensive homogeneous and heterogeneous chemistry is included. The liquid phase is traced by considering individual droplets. Discussion on the model's application to diamond production from acetone in a hydrogen–argon plasma is included. The major conclusions are: (1) Liquid injection possesses a capability to deliver the hydrocarbon precursor directly onto the deposition target. (2) For the case of complete evaporation of the droplet before reaching the substrate, the deposition rate is similar to that obtained with gaseous precursors. (3) The computational results compare well with experimental data. The modeling results can be used to optimize the injection parameters with regard to the deposition rate.     

Inorganic-organic hybrids of the p,p′-diphenylmethylenediphosphinate ligand with bivalent metals: a new 2D-layered phenylphosphinate zinc(II) complex

By reaction of Zn(CH₃COO)₂ with p,p′-diphenylmethylenediphosphinic acid in water a new inorganic-organic polymeric hybrid of formula [Zn(CH₂(P(Ph)O₂)₂)] has been synthesized and completely characterized. The X-ray analysis established that the structure consists of 2D-layered polymeric array, the 2D-sheets being built up through strong covalent linkages between the zinc metal and the oxygen donors of the phenylphosphinate ligand. The 2D-layers, which are featuring a mesh-net fashion, present voids of various dimensionality, up to 24-membered rings. The organic parts of the hybrid ligand, namely the phenyl rings, are shielding the inorganic skeleton of the layers, preventing the propagation of the polymer in the third dimension. No water molecules are present in the lattice, both of coordination and crystallization. Crystal data are: monoclinic, P2₁/c, a=11.840(2), b=9.646(9), c=12.516(5) Å, β=95.03(2), V=1423.9(15) Å³, Z=4. The solid material has been characterized by ³¹P MAS NMR spectroscopy and thermogravimetric analysis.     

Thermal degradation behaviors of some branched and linear polysiloxanes

The thermal degradation behaviors of some branched and linear polysiloxanes were studied by thermogravimetric (TG) analysis and infrared (IR) spectroscopy, and the effect of phenyl content on the thermal stability of the tested branched polysiloxanes was investigated. The branched polysiloxanes with phenyl obtain higher thermal stability at lower temperature. The degradation residues of the examined branched polysiloxanes at 800 °C are rather high, 65.1-77.6% in N₂ and 40.5-66.5% in air, respectively. However, the amount of solid residue increases with decrease in phenyl content in both N₂ and air atmospheres. It was found that the thermal stability of the branched polysiloxanes is higher than that of the linear one, which indicated that the branched structure benefits the formation of a crosslink in the solid residue.     

Effect of a novel phosphorous-nitrogen containing intumescent flame retardant on the fire retardancy and the thermal behaviour of poly(butylene terephthalate)

A novel phosphorus-nitrogen containing intumescent flame retardant (P-N IFR) was prepared via the reaction of a caged bicyclic phosphorus (PEPA) compound and 4,4′-diamino diphenyl methane (DDM) in two steps. The product was added to poly(butylene terephthalate) (PBT) to obtain halogen-free flame retarded polyester. UL-94 test, thermogravimetry and in situ infrared spectroscopy were used to characterize the flammability, thermal degradation properties and the char-forming process. It was shown that the phosphorus-nitrogen containing compound could improve both the flame retardancy and thermal stability more effectively than other P-N flame retardants. Furthermore, it was a good char-forming agent incorporated with the co-addition of polyurethane (PU) when the combustion occurred. The formation of P-N structure was incorporated in the char layer.