Thermostating in capillary electrophoresis

Summary The use of high voltages across a electrophoresis capillary will increase the temperature of the buffer due to Joule heating. As a result temperature control in CE is rather important since variations in the buffer temperature will result in changes in the pH of the buffer, peak shape, migration time, reproducibility, efficiency, 3-D structure of macromolecular analytes, etc. Six different thermostating systems have been evaluated: (i) natural convection, (ii) fan, (iii) home-made and (iv and v) two commercially available high-speed air and a (vi) liquid thermostated device. In all cases the temperature of the buffer in the capillary is calculated according to the temperature-conductivity relationship. For this purpose two parameters are introduced describing temperature control: the temperature onset (δT) and the temperature rise factor (α). From these results, it can be concluded that high speed air thermostating can be as efficient as liquid thermostating.     

主动冷却点阵夹层防热结构温度响应计算模型北大核心CSCD

针对点阵夹层结构主动热防护问题,建立了夹层结构面板和芯体导热与冷却剂对流耦合的非稳态传热理论模型,利用有限体积法离散控制方程并在MATLAB中进行了迭代求解.模型首次考虑了面板与夹芯杆之间的收缩热阻,并利用分离变量法得到了收缩热阻的近似解析解.基于单胞模型和周期性边界条件,模拟得到了模型所需的表面对流传热系数h_(b)和h_(fin).最后,选取多单胞计算工况进行数值模拟和理论模型对比,并讨论了收缩热阻对模型预测精度的影响.结果表明:理论模型能够准确预测夹层结构及内部流体的温度变化,理论与仿真之间的最大误差不超过1%;随着外加热流密度不断增大,忽略收缩热阻使得计算结果造成的误差不断增大;与数值模拟相比,理论模型可显著地减少计算时间并节省计算资源,尤其适用于非均匀、非稳态复杂热载荷下点阵夹层结构的温度响应计算.     

计及位置不确定的喷雾机喷杆系统仿形姿态渐近跟踪控制北大核心CSCD

针对喷雾机喷杆仿形系统中同时存在负载变化、未建模不确定项、物理参数摄动以及外部干扰等问题,提出了一种基于小波网络逼近的具有自适应性和鲁棒性的反步控制方法.首先,将含有不确定、未知和非线性项的喷杆仿形系统建立为完整的数学模型,将其等价转化为具有严格反馈的状态空间形式;其次,采用设计的小波基元去构造神经网络,在满足最优误差有界条件下逼近反步法中虚拟等效控制部分,选取自适应更新律估计系统中存在的未知参数,引入鲁棒补偿项减小复合干扰对系统的不利影响,降低了输入指令信号的阶次要求;最后,通过构造合适的Lyapunov函数,应用稳定性理论证明了闭环系统位置跟踪误差渐近收敛到原点.仿真结果表明,所提控制方法可实现喷雾机喷杆位置姿态快速升降机动调整,有效地增强了喷杆系统的鲁棒稳定性和控制精度.     

The relative importance of temperature and isotope effects on the dipole oscillator strength distribution of H2

Summary The calculation of the effects of temperature and isotopic composition on the energy weighted moments of the dipole oscillator strength distribution of H₂ in the random phase approximation to the polarization propagator are reported. It is seen that the effect of isotopic composition is small, while that of temperature is of an order accessible to experiment. We find that all the mean excitation energiesI , for =–1, 0, 1, decrease with temperature as does the dipole oscillator strength momentS() for >0, while the opposite is true for <0. These effects are interpreted in terms of the bond length dependence of the excitation energies.     

EFFECTS OF SOURCE PROPERTIES ON CUTOFF FREQUENCY f_(max)

The cutoff frequency f_(max) of radiation from earthquakes is one of the important parameters for studying the source process. By theoretical analysis and numerical experiments on acceleration Fourier spectrum it is suggested that f_(max) mainly depends on the lower values of slip rise time. This result can be used to explain the observational fact that the greater the earthquake magnitude, the smaller the value of f_(max).     

Conductance of potassium halides near the temperature of maximum density of water

The conductances of dilute aqueous solutions of KCl, KBr, and KI have been measured over the temperature range 2 to 8°C and have been analyzed by the Fuoss-Hsia equation. The ionic Walden products at infinite dilution have been discussed in terms of local viscosity. The temperature dependence of these products suggest that near the temperature of maximum density of water, the structure-breaking ability of these ions changes in a regular way.     

Glow discharge mass spectrometry

Over the past twenty years or so, glow discharge mass spectrometry (GDMS) has become the industry standard for the analysis of trace elements in metals and semiconductors. A review of its history is followed by a picture of the present situation and a look to where the future may lie. Applications are summarised, including the ability of GDMS to offer depth-resolved data and non-conductor analysis, and the well-documented quantitative nature of the results is reviewed. The effects resulting from the physical properties of the analyte material are discussed at length. Finally, recent work such as fast flow sources and pulsed glow discharges is reviewed.     

Volumetric properties of ethanol–water mixtures under high temperatures and pressures

The densities of ethanol and ethanol–water mixtures were measured with a vibrating tube densimeter at 25.0, 50.0 and 75.0 °C in the pressure range from 0.10 to 40.00 MPa. Densities were correlated using an empirical model. Partial molar volumes, excess molar volumes, isothermal compressibilities, cubic expansion coefficients and internal pressures were calculated from obtained densities. This study reports the dependence of densities, partial molar volumes, excess molar volumes, isothermal compressibilities, cubic expansion coefficients and internal pressures on composition, temperature and pressure.     

Volumetric study on the inclusion complex formation of α- and β-cyclodextrin with 1-alkanols at different temperatures

The partial molar volumes (V_a) of 1-alkanols (carbon number, m=5, 6, 7) in - and -cyclodextrin (CD) solutions at 5.00 mmol kg^–1 have been determined as a function of alkanol concentration (C_a) between 293.2 and 308.2 K by using a dilatometer. It has been observed that with an increase in C_a, V_a increased in -CD solution but decreased in -CD solution, asymptotically to a value of V_a in CD-free water. The dependence of V_a on C_a provided the binding constant (K) of 1:1 complex, the volume change in complex formation, and the partial molar volume of complex itself. The complex formation mechanism has been discussed on the basis of these values and their carbon number dependences in the respect of geometric behavior, hydrophobic interaction, and van der Waals interaction. It is concluded that the CD cavity in water is not rigid but flexible for fitting in nicely with guest molecule.     

Comparison of polydimethyl siloxane stationary phases with 5% and 50% phenyl substitution for the separation of organophosphorus and organonitrogen pesticides under optimized gas chromatographic conditions

The CGC analysis of 25 organophosphorus and organonitrogen pesticides was optimized on two different stationary phases, namely a 5% diphenyl dimethyl silicone (SE-54 type) and a 50% diphenyl dimethyl silicone (OV-17 type) by selecting the best temperature program conditions, using computer simulation.