光突发交换的交换控制策略和光缓存配置

光突发交换是面向下一代互联网的光交换模式.讨论了异步光突发交换系统的交换控制策略以及相应光缓存的优化配置策略.除了传统预约模式的交换策略,还研究了非预约和改进型预约模式,它们的性能评估由计算机仿真给出.结果表明:在条件相当情况下,改进型预约模式具有最低的丢包率.同时光缓存的配置对上述几类交换控制策略的性能都有很大影响,仿真结果指出:光缓存的粒度对系统性能具有重要影响,所讨论的几类交换模式都存在最佳时延粒度,研究结果对光交换矩阵的设计有指导意义.     

具有算子与有界约束的无穷维规划问题的最优性条件

本文给出了当all-at-once方法用于求解最优控制问题而产生的一类同时具有算子和对部分变量具有简单界约束的无穷维最优化问题的一个一阶必要条件,构造了相应的信赖域子问题,据此,信赖域法可以用于求解无穷空间中的最优化问题。     

一种具有弹性服务质量要求的多业务最优接纳控制策略

随着无线网络所支持的业务种类的增加和具有弹性服务质量要求的业务的大量出现，与服务质量保证密切相关的呼叫接纳控制问题成了近年来无线网络研究的热点之一。本文研究了基于准马尔可夫决策过程方法的多业务最优呼叫接纳控制问题。根据业务的特点，首先引入了带宽分配满意度函数和收益率函数，在此基础上，提出了基于带宽分配满意度的最优带宽分配算法和基于准马尔可夫决策过程方法的最优呼叫接纳控制策略。计算结果表明，本文方案能够在对各类业务的呼叫阻塞率进行适当权衡的前提下，进一步提高网络的期望收益率和期望带宽利用率，同时满足了各类业务的最低服务质量要求。     

CDMA系统中联合功率控制、波束赋形与多用户检测

应用功率控制、波束赋形和多用户检测可以有效地消除和减少CDMA系统中的干扰。本文结合波束赋形和多用户检测的特性，提出一种应用波束赋形增益和多用户相关矩阵的解相关算法。基于算法的复杂性，提出一种区分聚集用户进行多用户检测的的算法。由于波束赋形能够消减主瓣波束之外的多用户干扰，对聚集移动台采用解相关检测达到减少运算量和消除多用户干扰的目的。对算法进行了仿真分析，证明了本算法的优越性。     

欠驱动系统Pendubot的模糊控制策略

本文针对欠驱动Pendubot机器人系统，提出一种简单可靠的摇起及平衡控制策略。通过利用模糊控制及全状态反馈控制技术来分别设计摇起控制器及平衡控制器，其中模糊摇起控制器的设计使得系统的摇起可靠性得到大大的加强，并缩短了响应时间，两个控制器的转换通过转换装置实现。最后的仿真结果验证了算法的有效性。     

TCP/IP网络的动态模型描述

拥塞现象成为TCP/IP网络发展面临的一个重要问题。因此，拥塞控制对TCP/IP网络的鲁棒性和稳定性具有重要作用。目前，网络拥塞控制策略主要包括两类：端到端的控制机制，如TCP拥塞控制算法；网络内部的主动队列管理(AQM)策略。但由于缺乏对网络系统动态特性的了解，这些拥塞控制策略大都基于专家经验，并没有建立完整的理论分析框架。为此，本文从数据流的角度出发，通过建立网络基本单元状态方程模型来实现IP网络系统的数学解析模型，然后用混杂系统来描述TCP带有拥塞控制策略的数据传输过程，建立了TCP/IP网络的动态模型，为网络系统中动态性能的分析、拥塞控制策略的设计奠定了基础。实验结果表明，该数学模型与NS仿真实验的结果相一致。     

基于CSCW的协同编著系统的设计

讨论了计算机支持的协同工作(CSCW)的主要技术，其中重点讨论了协同编著系统设计中的并发控制技术，指出了其与传统的并发控制技术的区别。根据CSCW的基本原理设计出了一个基于Browse／Server结构的协同编著系统的系统模型。该系统模型比传统的模型更加方便了用户之间通过Internet的浏览器进行协作。     

On the structure of the optimal server control for fluid networks

This paper derives the optimal trajectories in a general fluid network with server control. The stationary optimal policy in the complete state space is constructed. The optimal policy is constant on polyhedral convex cones. An algorithm is derived that computes these cones and the optimal policy. Generalized Klimov indices are introduced, they are used for characterizing myopic and time-uniformly optimal policies.Received: November 2004 / Revised: February 2005The research of this author has been supported by the project ‘‘Stochastic Networks’’ of the Netherlands Organisation for Scientific Research NWO.     

Robust Speed Control of a Low Damped Electromechanical System Based on CRONE Control: Application to a Four Mass Experimental Test Bench

Robust speed control of a low damped electromechanical system with backlash is studied, controlled load angular speed being not measured. The proposed control strategy combines a Luenberger observer (load angular speed and load torque disturbance estimations) and a robust CRONE controller. The observer provides estimation of the load angular speed and of the disturbance torque applied on the load. Through the computation of only three independent parameters (as many as a PID controller), the CRONE controller permits to ensure the robust speed control of the load in spite of plant parametric variations and speed observation errors. The proposed control strategy is applied to a four mass experimental test bench.     

Preparation and characterization of acrylic‐based black particles of poly(methyl methacrylate‐co‐ethylene glycol dimethacrylate) by dispersion polymerization for electrophoretic displays

Ultrafine black particles, ranging in diameter from 1 to 3 μm, were prepared by dispersion polymerization in a methanol/water mixture with vinyl monomers, nonpolymerizable Sudan black B dyes, and fluorescein isothiocyanate labeled charge control additives. Both the ratio of the methanol to the water dispersion medium and the polymeric stabilizer concentration had significant effects on the particle size. The important role of the stabilizer concentration lay in the particle formation step, during which it determined the particle stability and final particle size. These could affect the extent of the aggregation of nuclei by changing the adsorption rate of the stabilizer and the viscosity of the dispersion medium, resulting in smaller particles. The fluorescent‐labeled charge control additives strongly affected the electrophoretic mobility. A small concentration of fluorescent‐labeled charge control additives increased the electrophoretic mobility. However, a further addition reduced the electrophoretic mobility of the polymer particles. The concentration dependence of the fluorescent‐labeled charge control additives on the deposition behavior in the polymer particles was successfully imaged and thereafter quantified by image analysis. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5608–5616, 2004