Scheduling Algorithms for Packet-Oriented MAC Protocols in Wireless Multimedia Systems

Future generation wireless multimediacommunications will require efficient Medium AccessControl (MAC) protocols able to guarantee suitable Qualityof Service (QoS) levels for different traffic classes whileachieving a high utilization of radio resources. This paperproposes a new scheduling technique to be adopted at the MAClevel in wireless access systems, named Dynamic Scheduling-Time DivisionDuplexing (DS-TDD), that efficiently managesvideo, voice, Web and background traffics. A theoretical approachis proposed in this paper to evaluate the DS-TDD performance withvoice and Web traffics. Simulation results have permitted tohighlight the following promising characteristics of the DS-TDDscheme: (i) a high capacity of real-time traffics isattained with a QoS insensitive to Web and background trafficloads; (ii) a high throughput can be guaranteed whilepreserving the QoS levels of the different traffic classes;(iii) heavier downlink traffic loads do not modify the QoSof uplink traffics. Finally, extensive comparisons with differentscheduling schemes proposed in the literature have permitted tohighlight the better performanceof DS-TDD.     

系统仿真技术在控制系统中的应用

系统仿真技术是一种以对实际系统建立正确的数学模型为基础，以计算机为工具的对实际系统进行模拟的技术。计算机技术的高速发展，使系统仿真技术在各个领域中都得到了广泛的应用。以化工及工业锅炉自动控制系统中水箱系统的液位控制问题为例，阐述了系统仿真技术在自动控制领域中的应用。     

结合功率控制的时-空多用户检测器

针对CDMA系统中抗干扰技术,提出一种结合多用户检测、波束成形和功率控制的算法,对接收信号在时域和空间上进行联合处理,能大大抑制干扰,提高系统容量。     

理想九点五态控制器原理的叙述

用计算的方式叙述理想九点五态控制器的控制原理。为便于人们理解二阶对象的运动中控制的变化过程,将抽象的对象转换为人们熟知的L-R-C电路,通过调节输入电压(即控制作用)的大小和方向来实现对对象性能的调节,并使系统达到理想的性能指标。最后用仿真来验证计算结果的正确性。     

基于CAN总线的舵机控制系统设计

主要介绍了一种基于CAN总线的舵机控制系统。系统以CAN总线作为通信方式，PWM控制信号通过硬件方式产生，具有结构简单、信号稳定和实时性强的特点。     

一种新的基于快速功控的多普勒估计

针对采用快速功控的移动通信系统提出了一种简便的多普勒估计方法。该方法利用功控后的接收信号电平的平稳性与最大多普勒频移有密切关系这一特点，通过测量接收信号电平的平稳性估计多普勒频移。文中在单径瑞利衰落信道条件下对这一方法进行了仿真验证，并同文献中提出的COV方法进行了比较，仿真结果表明在信道变化不是太快时本方案有较好的估计精度。     

机抖激光陀螺抖动机构的温度特性的研究

研究了机抖激光陀螺抖动偏频量与温度之间的关系。通过大量的重复性高低温实验,证明了抖动偏频量与温度的线性关系,并得到了拟合直线表达式。结果表明,抖动偏频量与温度具有较好的线性关系,而且具有较好的重复性。同时用抖动偏频量对陀螺的零漂进行补偿,提高了陀螺的精度。     

实时硬件系统中控制方法的研究

由于实时硬件系统的规模和复杂度不断增大，系统结构的模块化设计已成为硬件系统开发的发展趋势。研究了硬件系统中模块控制的方法和特点。结合MPEG2电视编码器中各功能模块的特点，提出了适合该硬件系统的模块控制方案，说明了控制模块的硬件设计思想和软件实现。实践证明，该方案满足系统实时性和可靠性的设计要求。     

Joint scheduling and power control supporting multicasting in wireless ad hoc networks

This paper addresses the problem of power control in a multihop wireless network supporting multicast traffic. We face the problem of forwarding packet traffic to multicast group members while meeting constraints on the signal-to-interference-plus-noise ratio (SINR) at the intended receivers. First, we present a distributed algorithm which, given the set of multicast senders and their corresponding receivers, provides an optimal solution when it exists, which minimizes the total transmit power. When no optimal solution can be found for the given set of multicast senders and receivers, we introduce a distributed, joint scheduling and power control algorithm which eliminates the weak connections and tries to maximize the number of successful multicast transmissions. The algorithm allows the other senders to solve the power control problem and minimize the total transmit power. We show that our distributed algorithm converges to the optimal solution when it exists, and performs close to centralized, heuristic algorithms that have been proposed to address the joint scheduling and power control problem.     

自动交换光网络控制平面功能结构的探讨

文章主要讨论了自动交换光网络(ASON)控制平面的两种不同结构：控制平面在网元外部的结构和控制平面部分集成在网元内部的结构，并对这两种结构进行了比较．