The improvement of corrosion resistance of Ce conversion films on aluminum alloy by phosphate post-treatment

A phosphate post-treatment process for Ce conversion film on aluminum was studied. SEM (scanning electronic microscope), XPS (X-ray photoelectron spectroscopy) and electrochemical measurements were used to characterize the properties of the films. After the post-treatment the micro-cracks on the film surface obviously diminished, and corrosion resistance of the conversion film in NaCl solution increased. The conversion film, without post-treatment, was mainly composed of hydrated cerium oxides, and the dehydration of the film may cause cracking of the films. After phosphate treatment, stable cerium phosphate CePO₄ was formed on the surface, and the content of crystal water decreased greatly, leading to improvement of the film performance with less micro-cracks.     

Electrodeposition and properties of Zn-nanosized TiO2 composite coatings

Nanosized TiO₂ particles were prepared by sol-gel method. The TiO₂ particles were co-deposited with zinc from a sulphate bath at pH 4.5 using electrodeposition technique. The corrosion behavior of the coatings was assessed by electrochemical polarization, impedance, weight-loss and salt spray tests. Wear resistance and microhardness of the composite coating was measured. The smaller grain size of the composite coatings was observed in the presence of TiO₂ and it was confirmed by the images of scanning electron microscopy (SEM) and X-ray diffraction (XRD) techniques.     

Plasma electrolytic oxidation coating on AZ91 magnesium alloy modified by neodymium and its corrosion resistance

Ceramic coatings on the surfaces of Mg-9Al-1Zn (AZ91) magnesium alloy and Mg-9Al-1Zn-1Nd magnesium alloy (AZ91 magnesium alloy modified by neodymium, named as AZ91Nd in this paper) are synthesized in aluminate electrolyte by plasma electrolytic oxidation (PEO) process, respectively. X-ray diffraction and X-ray photoelectron spectroscopy analyses show the PEO coating on the Mg-9Al-1Zn-1Nd alloy comprises not only MgO and Al₂O₃, which are found in the coating on the AZ91 alloy, but also a trace amount of Nd₂O₃. Microstructure observations indicate the addition of Nd can decrease the sizes of β phases and form Al₂Nd intermetallics in the AZ91 alloy. The fine β phases can effectively restrain the formation of unclosed-holes and greatly decrease the sizes of pores in the coating during the PEO process. In addition, the Al₂Nd intermetallics can be completely covered due to the lateral growth of the PEO coatings formed on the α and β phases. As a result, the coating on the AZ91Nd alloy possesses a dense microstructure compared with that on the AZ91 alloy. The following corrosion tests indicate the corrosion resistance of the PEO coating on the AZ91Nd alloy is evidently higher than that of the PEO coating on the AZ91 alloy.     

Image analysis of atmospheric corrosion of field exposure high strength aluminium alloys

The corrosion morphology image acquisition system which can be used in the field was established. In Beijing atmospheric corrosion exposure station, the image acquisition system was used to capture the early stage corrosion morphology of five types of high strength aluminium alloy specimens. After the denoise treatment, wavelet-based image analysis method was applied to decompose the improved images and energies of sub-images were extracted as character information. Based on the variation of image energy values, the corrosion degree of aluminium alloy specimens was qualitatively and quantitatively analyzed. The conclusion was basically identical with the result based on the corrosion weight loss. This method is supposed to be effective to analysis and quantify the corrosion damage from image of field exposure aluminium alloy specimens.     

Charge/discharge characteristics of sulfur composite electrode at different temperature and current density in rechargeable lithium batteries

The charge/discharge characteristics of the sulfur composite cathodes were investigated at different temperatures and different current densities. The composite presented the discharge capacities of 854 and 632 mAh g⁻¹ at 60 and −20 °C, respectively, while it had the discharge capacities of 792 mAh g⁻¹ at 25 °C. The composite presented the discharge capacities of 792 and 604 mAh g⁻¹ at 55.6 and 667 mA g⁻¹, respectively, at room temperature. The results showed that the sulfur composite cathodes presented good charge/discharge characteristics between 60 and −20 °C and at a high c-rate up to 667 mA g⁻¹.     

流动条件下两种不同亲水基团咪唑啉型缓蚀剂的缓蚀性能

选择了两种含有不同亲水基团的咪唑啉型缓蚀剂, 即1-胺乙基-2-十一烷基咪唑啉(AEI-11)和1-羟乙基-2-十一烷基咪唑啉(HEI-11), 分别在静态及动态条件下,采用失重法、极化曲线法、电化学阻抗谱法研究了上述缓蚀剂对N80钢在CO2饱和的3%(w)NaCl溶液中的缓蚀性能. 研究结果表明, 无论在静态和动态条件下, HEI-11均表现出更佳的缓蚀性能, 即咪唑啉型缓蚀剂的缓蚀性能与亲水基团的极性成正比; 在流动条件为5 m·s-1时, 缓蚀剂的缓蚀效率显著降低. 为了进一步研究缓蚀剂的缓蚀性能与其结构的关系, 运用量子化学法计算了缓蚀剂的EHOMO(最高占有分子轨道)、ELUMO(最低空分子轨道), 结果表明缓蚀剂的缓蚀效率与EHOMO成正比, 与ELUMO及ELUMO与EHOMO的差值驻E成反比.     

Peridynamic modeling of pitting corrosion damage

In this paper we introduce a peridynamic model for the evolution of damage from pitting corrosion capable of capturing subsurface damage. We model the anodic reaction in corrosion processes (in which electroplating is negligible) as an effective peridynamic diffusion process in the electrolyte/solid system coupled with a phase-change mechanism that allows for autonomous evolution of the moving interface. In order to simulate creation of subsurface damage, we introduce a corrosion damage model based on a stochastic relationship that connects the concentration in the metal to the damage of peridynamic mechanical-bonds that are superposed onto diffusion-bonds. We study convergence of this formulation for diffusion-dominated stage. The model leads to formation of a subsurface damage layer, seen in experiments. We validate results against experiments on pit growth rate and polarization data for pitting corrosion. We extend the 1D model to the 2D and 3D, and introduce a new damage-dependent corrosion model to account for broken mechanical bonds that enhance the corrosion rate. This coupled model can predict the pit shape and damage profile in materials with microstructural heterogeneities, such as defects, interfaces, inclusions, and grain boundaries.     

Inhibition effect of butan-1-ol on the corrosion behavior of austenitic stainless steel (Type 304) in dilute sulfuric acid

The electrochemical behavior of austenitic stainless steel (Type 304) in 3 M sulfuric acid with 3.5% recrystallized sodium chloride at specific concentrations of butan-1-ol was investigated with the aid of potentiodynamic polarization, open circuit measurement and weight loss technique. Butan-1-ol effectively inhibited the steel corrosion with a maximum inhibition efficiency of 78.7% from weight-loss analysis and 80.9% from potentiodynamic polarization test at highest concentration studied. Adsorption of the compound obeyed the Freundlich isotherm. Thermodynamic calculations reveal physiochemical interactions and spontaneous adsorption mechanism. Surface characterizations showed the absence of corrosion products and topographic modifications of the steel. Statistical analysis depicts the overwhelming influence and statistical significance of inhibitor concentration on the inhibition performance.     

Synthesis of 4-unsubstituted 2H-1,2,3-benzothiadiazine 1,1-dioxides via ortho lithiation of protected benzaldehyde derivatives

Variously substituted 2-phenyl-1,3-dioxolanes and 2-(2-bromophenyl)-1,3-dioxolanes, prepared from the corresponding benzaldehydes, were lithiated ortho to the acetal group. Reaction of the lithio derivatives with sulfur dioxide led to the lithium sulfinate salts, which gave, upon oxidative chlorination with sulfuryl chloride, the corresponding benzenesulfonyl chlorides. Then, depending on the aromatic substitution pattern of the molecule, several protocols were elaborated for the functional group transformations leading to the target compounds. Ring closure was performed with hydrazine hydrate or acetylhydrazine, in the latter case with one-pot removal of the acetyl group. The 4-unsubstituted 2H-1,2,3-benzothiadiazine 1,1-dioxides thus obtained are potential drug candidates based on their structural similarity to biologically active phthalazinones.     

CuI-catalyzed thioarylation of active methylene compounds with in situ generated benzenethiols: Preparation of α-thioaryl-β-dicarbonyls and 4-thioaryl-5-pyrazolones

In this paper, a one-step copper-catalyzed procedure for oxidative coupling of active methylene compounds including cyclic β-diketones, cyclic β-ketoesters and 5-pyrazolone with benzenethiols is described. Benzenethiols are in situ generated in the reaction mixture from aryl halides and thiourea as sulfur transfer reagent. α-Thioaryl compounds are obtained in excellent yields and in short reaction time via the process which is free from the foul smell of thiols.