A New Criterion for Brittle-Ductile Transition of Polymer Blends

The T_c criterion was first used by S. Wu for characterizing the brittleductile (B-D) transition of N6/EPDM blends. But in this paper, a new criterion which is based on the stress analysis of blends is proposed to characterize the B-D transitions of blends, namely, A criterionV_(fc) and d_c are the critical volume fractions and particle size of dispersed particles in blends, respectively. For given blends, A is independent of the morphology of dispersed phase and is only the characteristic parameter of matrix. The B-D transitions of different blends, including polar N6/EPDM blends, nonpolar PP/EPDM blends and PE/CaCO_3 composites, were manipulated with A criterion and satisfactory results were obtained. In addition, a new master curve for the impact strength of PP/EPDM blends versus V_f~2/d was obtained. The results showed that A criterion is more suitable than T_c criterion for characterizing the B-D transition of blends.     

Analysis of dissolution profiles of iron,zinc, and manganese from complex dietary supplements by ion chromatography and chemometrics

Four commercially available formulations containing iron, zinc, and manganese were subjected to dissolution profile testing during 60 min and the dissolution was analyzed by ion chromatography. The obtained curves were analyzed directly by principal component analysis (PCA). The main trend (87.1% of variance) was connected with average dissolution percentage over the investigated time. The second component (11.2% of variance) is connected with shape of dissolution profile. All metals behave in the similar way and the differences were connected with excipients. An additional fit was completed on 12 kinetic models: first order kinetics (4 variants), Higuchi (2 variants), Hixson-Crowell (2 variants), Korsemeyer-Peppas, Logistic (2 variants), Peppas-Sahlin, Quadratic (2 variants), Weibull (3 variants), and Zero order kinetics (2 variants). The ranking of the fitting was performed by Akaike information criteria (AIC) values with additional PCA analysis on them, an approach presented in literature for the first time. The main trend (67.4% of variance) was connected with average fit. The second (14.8% of variance) is connected with differences of fitting ability to investigated dissolution curves. This methodology brought an overall look to trends and variances inside obtained data, both the profile shape and fitting ability to particular models.     

广义双剪应力准则角隅模型

本文将广义双剪应力准则变换为π平面和静水应力轴的柱坐标方程,然后将其角隅光滑化,得到了新的光滑、外凸的广义双剪应力准则角隅模型,研究结果表明,近年来作为光滑化Mohr-Coulomb理论提出的各种角隅模型,实际上并不是光滑化的Mohr-Coulomb理论,而是光滑化的广义双剪应力理论。     

Safety margin criterion of nonlinear unbalance elastic axle system

IntroductionAtpresentanewanddevelopingsubject—chaoticdynamicsstartsabroadprospectforanalysisofnonlinearsystem[1～ 5 ].Largerotatingmachineryisatypicalnonlinearnon_autonomoussystem .Thesaferunofrotorsystemisofgreatsignificancetosociallifeandeconomicdevelopment.Thestabilityisthekeytosafeoperation .Thesafestabilityanalysisandcontrolforlargesystemisnotonlyamajorbasicresearchbutalsoisveryimportanttosolvethesafeproblemsinlifeandproduction[6 ,7].Soar,althoughmanymathematicians,mechanistsandengineer…     

求解完全强非线性自治系统周期解及其稳定性的三变量迭代法

本文提出用广义位移x,基波幅值变化率da/dt=A(a)和系统频率ω(a)进行迭代的一种解析方法——三变量迭代法,求解一般的二阶完全强非线性自治系统的周期解及其稳定性。通过若干实例计算,表明了该方法行之有效。     

直杆塑性动力屈曲的双特征参数解

在关于轴向弹塑性压缩波下直杆塑性动力屈曲的研究中,将临界应力和屈曲惯性项指数参数作为一对特征参数求解．由动力屈曲发生瞬间的能量转换和守恒准则,导出波阵面上的屈曲变形补充约束条件．失稳控制方程、边界条件、塑性波阵面上的连续条件和补充约束条件构成定量求解两个特征参数和动力屈曲模态的完备条件。     

Two-parameter failure criterion for elastoplastic bodies with mode I cracks

The generalized Dugdale crack model is used to formulate two-parameter failure criteria for the cases of quasibrittle state and developed plastic zones at a mode I crack tip. The failure criteria relate the fracture strength characteristics and the stress mode at the crack tip through the plastic constraint factor. The critical state of bodies with cracks under uni-and biaxial loading is analyzed in the cases of plane stress and plane strain using the Tresca and von Mises yield criteria. A small-scale yield criterion, which is an analytic relation between the critical stress intensity factor and T-stresses, is established __________ Translated from Prikladnaya Mekhanika, Vol. 43, No. 7, pp. 47–57, July 2007.     

Upper bound limit analysis of active earth pressure with different fracture surface and nonlinear yield criterion

Conventional calculations of static and seismic active earth pressures of soils on a retaining wall are formulated assuming the soils obeying a linear Mohr–Coulomb yield criterion. However, experimental evidences show that the strength envelopes of almost all geomaterials are nonlinear in nature over a wide range of normal stresses. In this paper, the strength envelope of the backfill behind a retaining wall is considered to follow a nonlinear yield criterion. A simple method is proposed for calculating the static and seismic active earth pressures acting against a retaining wall using a nonlinear yield criterion. This method is based on the upper bound theorem of limit analysis. Both translational and rotational fracture surfaces are employed in the formulation for calculating active earth pressures. Quasi-static representation of earthquake effects using a seismic coefficient concept is adopted for seismic active earth pressure calculations. Instead of using directly the actual nonlinear yield criterion, a linear Mohr–Coulomb yield criterion, which is tangential to the nonlinear yield criterion, is used to formulate the active earth pressure problem as a classical nonlinear programming problem. A nonlinear sequential quadratic programming algorithm is used to search for the maximum solution. In order to assess the validity of the proposed method, values of active earth pressures for different values of seismic coefficients and nonlinear parameters in the yield criterion are calculated and compared with solutions obtained using an extended Rankine’s active earth pressure theory. For the case of static active earth pressure, the upper bound solutions using the present method with a translational fracture surface are equal to the extended Rankine’s theoretical solutions and are slightly smaller than those obtained using the present method with a rotational fracture surface. For the case of seismic active earth pressure, numerical results obtained using the present method with a rotational fracture surface is very close to the extended Rankine’s theoretical solutions. A study is conducted to investigate the effects of the parameters in the nonlinear yield criterion on the active earth pressures.     

固定接触界面切向静弹性刚度问题研究

根据两球体单峰同时受法向、切向载荷时微滑切向应力的分布以及MB模型,给出了界面的总切向接触静弹性条件刚度、总条件法向载荷的解析解。将切向接触静弹性条件刚度的解析解嵌入到有限元软件中,获得了整机的理论模态。以一款八四七厂华中工学院XHK5140型自动换刀计算机数控立式镗铣床上的结合部为研究对象,通过实验对解析解进行了定量验证。研究结果表明：在理论振型与实验振型一致的条件下,界面模型的相对误差在-19．2％～16．8％之间。     

LPS＇S CRITERION FOR INCOMPRESSIBLE NEMATIC LIQUID CRYSTAL FLOWS

In this paper we derive LPS's criterion for the breakdown of classical solutions to the incompressible nematic liquid crystal flow, a simplified version of Ericksen-Leslie system modeling the hydrodynamic evolution of nematic liquid crystals in R3. We show that if0 T +∞ is the maximal time interval for the unique smooth solution u ∈ C∞([0, T), R3),then |u| + |▽d| /∈ Lq([0, T ], Lp(R3)), where p and q safisfy the Ladyzhenskaya-Prodi-Serrin's condition:3p+2q= 1 and p ∈(3, +∞].