Double pulse laser-induced breakdown spectroscopy of explosives: Initial study towards improved discrimination

Detecting trace explosive residues at standoff distances in real-time is a difficult problem. One method ideally suited for real-time standoff detection is laser-induced breakdown spectroscopy (LIBS). However, atmospheric oxygen and nitrogen contributes to the LIBS signal from the oxygen- and nitrogen-containing explosive compounds, complicating the discrimination of explosives from other organic materials. While bathing the sample in an inert gas will remove atmospheric oxygen and nitrogen interference, it cannot practically be applied for standoff LIBS. Alternatively, we have investigated the potential of double pulse LIBS to improve the discrimination of explosives by diminishing the contribution of atmospheric oxygen and nitrogen to the LIBS signal. These initial studies compare the close-contact (< 1 m) LIBS spectra of explosives using single pulse LIBS in argon with double pulse LIBS in atmosphere. We have demonstrated improved discrimination of an explosive and an organic interferent using double pulse LIBS to reduce the air entrained in the analytical plasma.     

Advanced statistical evaluation of the complex formation constants from electrophoretic data II: Diastereomeric ion-pairs of (R,S)-N-(3,5-dinitrobenzoyl)leucine and tert-butylcarbamoylquinine

Intermolecular association and ion-pair formation, respectively, between a cationic chiral selector, viz. o-9-(tert-butylcarbamoyl) quinine (CQN), and the both enantiomers of anionic N-(3,5-dinitrobenzoyl)leucine, (R)-DNB-Leu and (S)-DNB-Leu, were investigated by affinity capillary electrophoresis (ACE). Thus, binding constants of the both diastereomeric ion-pairs, (R) and (S)-DNB-Leu/CQN associates, were determined by different experimental setups and correction of nonlinear effects. A reciprocal setup was employed for the high-affinity (S)-enantiomer, and the experimental mobility data obtained for CQN at variable (S)-DNB-Leu concentrations in the background electrolyte were linearized and evaluated by advanced statistical model. A binding constant of K_S=125.1 l mol⁻¹ was afforded. The constant for the (R)-enantiomer, which is outside the range suitable for direct affinity CE, was obtained from indirect affinity CE utilizing the separation of the DNB-Leu racemate at a single appropriate CQN concentration in the BGE (resolution method) taking advantage of the known constant for the (S)-enantiomer yielding a binding constant of K_R=2.51 l mol⁻¹. Thereby, the so-called “constant time method” was adopted for the required precise measurement of the effective mobilities of the both enantiomers. A combined approach of reciprocal affinity CE with racemic DNB-Leu as additive and the resolution method confirmed the results. The resulting constants evidence excellent enantioselectivity of the tert-butylcarbamoyl derivative of the cinchona alkaloid quinine as chiral selector for N-(3,5-dinitrobenzoyl) derivatives of amino acids.     

Darstellung,Kristallstruktur und spektroskopische Eigenschaften der Clusteranionen [(Mo6Br)X]2− mit Xa = F,Cl, Br,I

Synthesis, Crystal Structure and Spectroscopic Properties of the Cluster Anions [(Mo₆Br )X ]^2? with X^a = F, Cl, Br, I The tetrabutylammonium (TBA), tetraphenylphosphonium (TPP) and tetraphenylarsonium (TPAs) salts of the octa-μ₃-bromo-hexahalogeno-octahedro-hexamolybdate(2?) anions [(Mo₆Br)X]^2? (X^a = F, Cl, Br, I) are synthesized from solutions of the free acids H₂[(Mo₆Br)X] · 8 H₂O with X^a = Cl, Br, I. The crystal structures show systematic stretchings in the Mo? Mo bond length and a slight compression of the Brⁱ₈ cube in the F^a to I^a series. The cations do not change much. The i.r. and Raman spectra show at 10 K almost constant frequencies of the (Mo₆Brⁱ₈) cluster vibrations, whereas all modes with X^a ligand contribution are characteristically shifted. The most important bands are assigned by polarization measurements and the force constants are derived from normal coordinate analysis. The ⁹⁵Mo nmr signals are shifted to lower field with increasing electronegativity of the X^a ligands. The fluorine compound shows a sharp ¹⁹F nmr singlet at ?184.5 ppm.     

Multivariate analysis of non-homogeneous peaks in liquid chromatography

Summary The effects of concentration, separation and spectral similarity as factors influencing the accuracy of iterative target testing factor analysis (ITT-FA) are investigated for three component systems by the application of analysis of variance (ANOVAR). ANOVAR is applied over a range of peak separations to map the changing effects of the three factors with increasing overlap. Two error responses were measured and analysed, (a) Relative cluster error (RCE) a measure of the error over all peaks in a cluster and (b) Relative peak error (RPE) the error of an individual peak. Multicomponent analysis (MCA) a method requiringa priori spectral information, is used as a referee method for ITT-FA.     

Analysis of critical points on the potential energy surface

A simple classification scheme is proposed for critical points, based only on rankr and signatures of the (n,n)-matrixG of harmonic force constants. The determination ofr ands, e.g. by the well-known factorizationG=L ^T gL (L: triangular matrix,g: diagonal matrix), has several theoretical as well as practical (computational) advantages over the inspection of eigenvalues ofG, so far used in quantum chemistry. The eigenvalues are sufficient butnot necessary for a classification whereas rank and signature are the only necessary and sufficient prerequisites for solving the task. For the purpose of presenting a working example, by calculating only a 2×2 torque constant matrix, it is shown that the coplanar ethylbenzene is unstable in the CNDO/2 picture.     

GC–MS analysis of phenolic compounds in fuels after conversion to trifluoroacetate esters

The GC–MS characteristics of trifluoroacetate esters of phenolic compounds are discussed. Linear temperature programmed retention indices and total ion current MS response factors of over 120 phenolic esters are reported. The main GC advantages from analysis of trifluoroacetate esters as compared to plain phenols are enhanced volatility and improved resolution. For example, the elution temperature of a given phenol is typically 50 °C greater than that of the corresponding trifluoroacetate ester. Also, while retention of compounds with two trifluoroacetate groups is only moderately greater than mono esters, underivatized dihydroxy compounds are very difficult to elute from any GC column. Complete resolution of isomeric C₀-, C₁- and C₂-alkylphenol esters is readily achieved on conventional fused silica GC columns; resolution of the corresponding underivatized compounds requires specialized GC columns with low temperature limits. In general, mass spectra of trifluoroacetate esters are more characteristic of a given structure than those of the corresponding phenols and may be more rigorously interpreted towards structural elucidation. A table in the report summarizes some of the more important spectral features used in compound identification. Example applications in analysis of coal-, shale- and petroleum-derived materials are presented. Selected ion monitoring is used to determine individual phenolic components in whole distillates; reconstructed ion chromatograms are used to illustrate distributions of selected species as a function of fuel storage and thermal stress.     

Structure-activity relationship of Ca2+ channel blockers: A study using conformational analysis and chemometric methods

Summary A structure-activity relationship study has been done on 8 compounds with the activity known as Ca²⁺ channel blockers. Conformational analysis was carried out using a molecular mechanics method. The 3D-QSAR approach was used and the most polar functional groups present in all the molecules were considered. Eight interatomic distances are necessary to define the relative spatial disposition of these relevant molecular fragments. The structure-activity relationship between interatomic distances and biological activity was performed using statistic and chemometric methods. In particular, with Principal Component Analysis, it was possible to reduce the number of interatomic distances: only six of the eight distances are sufficient to describe the system in a useful way. A classification method was iteratively used to select the most probable conformations linked to the biological activity and to build a model able to classify conformations according to their biological behaviour. Cluster analysis on the active selected conformations subsequently allowed the identification of two different geometrical patterns for the active compounds. Finally the validity of the model was verified by correctly predicting the activity of other molecules not used in the construction of the model but possessing known activity.     

Bias in modal parameters due to aliasing in the time domain

This paper deals with some aliasing effects in the time domain that can lead to unacceptable misestimations of modal parameters. When a frequency response function of a vibrating system is sampled and inverse Fourier transformed, the resulting impulse response is given by an infinite geometric series, the single term of which is the impulse response itself shifted in time. For this reason, some modal parameters, if estimated in the time domain, are biased; in particular, while the damping factor and the natural frequency are not influenced by the aliasing phenomenon, the magnitude and phase of the residue can be highly biased. Corrective terms are theoretically evaluated and their efficiency is shown in numerical simulations.

---

Sommario In questo articolo e' presentato un metodo per correggere gli errori che si compiono nella stima di alcuni parametri modali, quando essi vengono ricavati nel dominio del tempo. Infatti se la funzione di risposta in frequenza e' ottenuta con eccitazioni particolari—quali ad esempio lo pseudo-random, lo stepped-sine a passo costante o lo sweep in frequenza-la risposta impulsiva, ottenuta per mezzo dell'antitrasformata discreta di Fourier, risulta periodica, con periodo pari all'inverso della spaziatura tra le righe spettrali. Cio' comporta un errore nella stima dell'ampiezza e della fase del residuo, mentre nessuna conseguenza si ha sulla frequenza naturale e sul fattore di smorzamento. L'errore sulle stime risulta tanto piu' grande, quanto meno smorzata e' la risposta impulsiva all'interno dell'intervallo di osservazione.Partendo dall'inviluppo e dalla fase istantanea dei segnali complessi, ottenibili per mezzo della trasformata di Hilbert, si sono ricavati i termini correttivi sia per il modulo, che per la fase del residuo. La validita' delle correzioni e' mostrata con esempi numerici.

     

Evaluation of the surface tension measurement of axisymmetric drop shape analysis (ADSA) using a shape parameter

A quantitative criterion called “shape parameter” to evaluate the quality of surface tension measurement of Axisymmetric Drop Shape Analysis (ADSA) is presented. ADSA is a powerful technique for the measurement of interfacial tensions and contact angles of pendant drops, sessile drops, and bubbles. Despite the general success of ADSA, deficient results may be obtained for drops close to spherical shape. Therefore, the “shape parameter” was used to determine the range of drop shapes in which ADSA succeeds or fails. The “shape parameter” is a dimensionless parameter that expresses quantitatively the difference in shape between a given experimental profile and an inscribed circle. The surface tension measurements of ADSA were evaluated for both pendant drop and constrained sessile drop configurations using the shape parameter. Different shapes of the pendant drop were studied using different sizes and materials of holders. For each drop configuration, a “critical shape parameter” was defined based on the minimum value of the shape parameter that guarantees an error of less than ±0.1 mJ/m². Furthermore, the effects of the type of liquid and constellation on the “critical shape parameter” were studied.