Preparation and characterization of fused-silica capillary columns coated with <Emphasis Type="Italic">m</Emphasis>-carborane–siloxane copolymers for gas chromatography

The carborane–siloxane copolymers Dexsil 300, a 34.5% bis(dimethylsilyl)-m-carborane–65.5% dimethylsiloxane copolymer, and Dexsil 400, a 24.9% bis(dimethylsilyl)-m-carborane–50.8% dimethyl, 24.3% methylphenylsiloxane copolymer, were coated on fused silica capillary columns and their gas chromatographic properties were evaluated. Their selectivity was evaluated using both Rohrschneider–McReynolds constants and triacylglycerol indices. The bis(dimethylsilyl)-m-carborane unit turned out to be equivalent to two dimethylsiloxy units and one half of a diphenylsiloxy unit. The m-carborane unit was found to cause a 15–25 K shift in the elution temperature between 120 and 360 °C. The working range was from 20 and 0 °C to 380 °C for Dexsil 300 and Dexsil 400, respectively. The column bleeding levels at 380 °C were below 20 and 15 pA for Dexsil 300 and Dexsil 400, respectively.     

Capillary electrochromatography of methylated benzo[a]pyrene isomers. II. Effect of stationary phase tuning

For Part II of our ongoing study, we present a strategy for stationary phase optimization for the capillary electrochromatographic (CEC) separation of the 12 methylated benzo[a]pyrene (MBAP) isomers. Utilizing the optimum mobile phase conditions from Part I of our study as a guide, seven commercially available stationary phases have been evaluated for their ability to separate highly hydrophobic MBAP isomers. Ranging in design from high-performance liquid chromatography (HPLC) to CEC application, each phase was slurry packed in house and tested for CEC suitability and performance. Several stationary phase parameters were investigated for their effects on MBAP separation including bonding type (monomeric or polymeric, % carbon loading, surface coverage), pore size, particle size, and type of alkyl substituent. In this manner, the present state of commercially available packings has been assessed in our laboratory. Utilizing the optimum polymeric C18-5 microm-100 A-PAH stationary phase, the effects of CEC packed bed length and capillary inside diameter (I.D.) were also evaluated. A 50 microm I.D. capillary, 25 cm packed bed length and 75% (v/v) acetonitrile, 12.5 mM Tris, pH 8.0, 20 degrees C at 30 kV, provided resolution of 11 out of 12 MBAP isomers thus showing the effectiveness of CEC for analysis of structurally similar methylated polyaromatic hydrocarbons.     

Synthesis and evaluation of new propazine-imprinted polymer formats for use as stationary phases in liquid chromatography

Silica particles have been used as supports for the preparation of three different propazine-imprinted polymer formats. First format refers to grafting of thin films of molecularly imprinted polymers (MIPs) using an immobilised iniferter-type initiator (inif-MIP). The other two new formats were obtained by complete filling of the silica pores with the appropriate polymerisation mixture leading to a silica-MIP composite material (c-MIP) followed by the dissolution of the silica matrix resulting in spherical MIP beads (dis-MIP). These techniques offer a mean of fine-tuning the particle morphology of the resulting MIP particles leading to enhanced capacity in chromatographic applications. Porous silica (specific surface area S = 380 m² g⁻¹, particle size p_s = 10 μm, pore volume V_p = 1.083 ml g⁻¹ and pore diameter d_p = 10.5 nm), methacrylic acid and ethylenglycol dimethacrylate were used for the preparation of the materials. All the MIP formats imprinted with propazine have been characterised by elemental analysis, FT-IR spectroscopy, nitrogen adsorption and scanning electron microscopy. Further, the materials were assessed as stationary phases in HPLC. Capacity factors, imprinting factors and theoretical plate numbers were calculated for propazine and other related triazines in order to compare the chromatographic properties of the three different stationary phases. For the inif-MIPs the column efficiency depended strongly on the amount of grafted polymer. Thus, only the polymers grafted as thin films of ca. 1.3 nm average thickness show imprinting effects and the highest column efficiency giving plate numbers (N) of 1600 m⁻¹ for the imprinted propazine. The performance of the c-MIP stationary phase decreases as result of the complete pore filling after polymerisation and increases again after the removal of the silica matrix due to a better mass transfer in the porous mirror-image resulting polymer. From this study can be concluded that the inif-MIP shows the best efficiency for use as stationary phase in HPLC for the separation of triazinic herbicides.     

Freezing temperatures of aqueous solutions of methyl formate and ethyl acetate with a variety of nonelectrolytes. Gibbs energy of interaction of the ester group with other functional groups

Freezing temperatures of dilute aqueous solutions of ethyl acetate and mixtures with myo-inositol, D-mannitol, formamide, 1,3,5-trioxane, 1,4-dioxane, acetamide, hexamethylenetetramine, and methyl formate have been measured. In addition, freezing temperatures of dilute aqueous solutions of methyl formate and mixtures with the above solutes have been measured. From these data, the pairwise molecular Gibbs energies of interaction between the molecules were calculated. Using the additivity principle, the pairwise functional group Gibbs energies of interaction were calculated for ester group interactions with a variety of other functional groups.     

Equations describing lamellar structure parameters and melting points of polyethylene-<Emphasis Type="Italic">co</Emphasis>-(butene/octene)s

Time- and temperature-dependent SAXS-experiments were used to determine the effect of octene and butene co-units on the lamellar structure and the melting properties of polyethylene. As expected, melting points decrease with increasing co-unit content, but crystal thicknesses are not affected and depend on the crystallization temperature only. Results can be cast into some simple equations which describe the dependence:

Cyclodextrins with heterocyclic substitution as GC stationary phases

Summary Two new cyclodextrin (CD) derivatives, heptakis{2,6-di-O-pentyl-3-O-[3′-(2″-chloro-4″,5″-dioxylmethene)-phenyl-5′-iso-oxazolylmethyl]}-β-CD (CD I) and heptakis{2,6-di-O-methyl-3-O-[3′-(2″-chloro)-phenyl-5′-iso-oxazolylmethyl]}-β-CD (CD II) were synthesized and coated on fused-silica capillary columns. Their chromatographic characteristics, including column efficiency, polarity, selectivity and phase transition were studied and compared with similar β-CD stationary phases. It was found that the heterocycle group has a significant effect on the selectivity of the CD stationary phases. Both stationary phases can be successfully used to separate many di- and trisubstituted benzene positional isomers and show stronger separation ability in separating low-polarity benzene positional isomers than other β-CD stationary phases.     

两种气相色谱固定相的研究

使用硫杂冠醚、穴醚[2.2.2]作气相色谱固定相制备毛细管柱,考察两种固定相的使用比例、极性、热稳定性,并对甲苯-苯、乙苯-甲苯、甲基苯酚（o/p）、二氯苯（o/p,m）、硝基氯化苯（m,o）、苯-环己烷、庚醇-辛醇、苯胺-N,N二甲基苯胺等混合样品进行色谱分离.实验结果表明：两种固定相在OV-1701中的比例均为15%时有较好的分离效果,都属于中等极性的固定相.硫杂冠醚、穴醚[2.2.2]的平均极性分别为815、832,其中硫杂冠醚固定相的热稳定性较好,有较高的使用温度（185℃）,而穴醚[2.2.2]的最高使用温度为120℃,因此穴醚[2.2.2]的使用温度受到一定的限制.从它们较好的分离性能看,固定相硫杂冠醚、穴醚[2.2.2]均具有较好的应用前景.     

Analysis of critical points on the potential energy surface

A simple classification scheme is proposed for critical points, based only on rankr and signatures of the (n,n)-matrixG of harmonic force constants. The determination ofr ands, e.g. by the well-known factorizationG=L ^T gL (L: triangular matrix,g: diagonal matrix), has several theoretical as well as practical (computational) advantages over the inspection of eigenvalues ofG, so far used in quantum chemistry. The eigenvalues are sufficient butnot necessary for a classification whereas rank and signature are the only necessary and sufficient prerequisites for solving the task. For the purpose of presenting a working example, by calculating only a 2×2 torque constant matrix, it is shown that the coplanar ethylbenzene is unstable in the CNDO/2 picture.     

Kováts' coefficients for predicting polarities in silicone stationary phases and their mixtures

Summary A correlation between the retention polarity and the Kováts' coefficient has been found for a number of commercial stationary phases used in gas chromatography. The correlation has been used to predict the polarity of a few mixed stationary phase columns prepared as binary mixtures of OV-101 with OV-25, DC-550 or Carbowax 20M, and also mixtures of OV-225 with SP-2340. A linear relationship was found between polarity and mixture composition. The temperature dependence of the Kováts' coefficient was investigated and found to increase linearly with temperature, the rate of increase depending on the polarity of the stationary phase, with greater increases for more polar stationary phases.     

The generalized order complementarity problem

Given an ordered Banach Space (E,K) andm functionsf ₁,f ₂,...,f _m:EE, the generalized order complementarity problem associated with {f _i} andK is to findx ₀K such thatf _i(x ₀)K,i=1,...,m, and (x ₀,f ₁(x ₀),...,f _m(x ₀))=0. The problem is shown to be equivalent to several fixed-point problems and equivalent to the order complementarity problem studied by Borwein and Dempster and by Isac. Existence and uniqueness of solutions and least-element theory are shown in the spacesC(, ) andL _p(, ). For general locally convex spaces, least-element theory is derived, existence is proved, and an algorithm for computing a solution is presented. Applications to the mixed lubrication theory of fluid mechanics are described.