Estimation of directivity and sound power levels emitted by aircrafts during taxiing, for outdoor noise prediction purpose

Integrated noise model (INM) is the most internationally used software to calculate noise levels near airports. Take off, landing or pass by operations can be modeled by INM, but it does not consider aircrafts taxiing, which, in some cases, can be important to accurately evaluate and reduce airports’ noise assessment.Aircraft taxiing noise emission can be predicted using other prediction tools based on standards that describe sound attenuation during propagation outdoors. But these tools require data inputs that are not known: directivity and sound power levels emitted by aircraft during taxiing.This paper describes methods used to calculate directivity indexes and sound power levels, based on field measurements made in Madrid-Barajas Airport (Spain). Obtained results can be used as inputs for general purpose outdoor sound prediction software, which will be able to evaluate noise at airports vicinity as industrial noise.Directivity and sound power levels have been estimated in octave and third octave band terms, for several aircraft families.     

贴片焊层厚度对功率器件热可靠性影响的研究

贴片工艺是用粘接剂将芯片贴装到金属引线框架(一般是由铜制成)上的过程.富铅的Pb/Sn/Ag软焊料在功率器件封装贴片工艺中作为粘接剂应用十分广泛.从功率器件整体来看,贴片焊层毫无疑问是影响器件可靠性最重要的因素之一,其不仅具有良好的导电导热性能,而且该焊层能够吸收由于芯片和引线框架之间的热失配而产生的应力应变,保护芯片免于受到机械应力的损伤.基于Darveaux的热疲劳寿命分析模型,利用功率循环加速实验以及有限元方法具体分析了贴片焊层厚度BLT对于功率器件热可靠性的影响.并通过实验与仿真的结果,提出提高功率器件热可靠性的设计原则.     

一种5.8GHz新颖混合结构的整流天线

整流天线决定了微波无线输电效率的高低。为了克服微带贴片整流天线需要钻孔,不利于大规模生产的问题,提出了一种新型5.8GHz混合结构的整流天线,接收面积大的矩形微带贴片构成接收天线,过渡到具有平行结构的共面带线,二极管和电容可方便地摆放在共面带线的两侧,避免了钻孔。试验表明该接收系统整流转换效率达到了78.2%,验证了设计的可行性。     

Computer Modeling and Simulation Evaluation of High Power LED Sources for Secondary Optical Design

Proposed and demonstrated is a novel computer modeling method for high power light emitting diodes（LEDs）. It contains geometrical structure and optical property of high power LED as well as LED dies definition with its spatial and angular distribution. Merits and non-merits of traditional modeling methods when applied to high power LEDs based on secondary optical design are discussed. Two commercial high power LEDs are simulated using the proposed computer modeling method. Correlation coefficient is proposed to compare and analyze the simulation results and manufacturing specifications. The source model is precisely demonstrated by obtaining above 99% in correlation coefficient with different surface incident angle intervals.     

A novel search method to reduce PAPR of an OFDM signal using partial transmit sequences

One of the main drawbacks of orthogonal frequency division multiplexing (OFDM) is the high peak‐to‐average power ratio (PAPR) of the transmitted OFDM signal. Partial transmit sequence (PTS) technique can improve the PAPR statistics of an OFDM signal. As ordinary PTS technique requires an exhaustive search over all combinations of allowed phase factors, the search complexity increases exponentially with the number of sub‐blocks. In this paper, we propose a novel PTS technique with reduced complexity that each level inverts twice of phase factor bits from previous level. Then we also use initial random phase sequence to find the better search way of PAPR reduction. Numerical results show that the proposed method can achieve significant reduction in search complexity with little performance degradation. Copyright © 2006 John Wiley & Sons, Ltd.     

A 60 GHz Medium Power Amplifier for Radio‐over‐Fiber System

We present the design and fabrication of a 60 GHz medium power amplifier monolithic microwave integrated circuit with excellent gain‐flatness for a 60 GHz radio‐over‐fiber system. The circuit has a 4‐stage structure using microstrip coupled lines instead of metal‐insulator‐metal capacitors for unconditional stability of the amplifier and yield enhancement. The gains of each stage of the amplifier are modified to provide broadband characteristics of input/output matching for the first and fourth stages and to achieve higher gains for the second and third stages to improve the gain‐flatness of the amplifier for wideband.     

高频地波雷达天线阵抗电离层干扰

高频表面波雷达是近年发展起来用于超视距监测大面积海洋环境的工具,但由于天线本身的特性和天线场的限制,发射天线辐射波束E面有一定的宽度或向上翘起一定角度,其辐射的电磁波能量除了沿海面绕射传播外,还有一部分能量以一定的角度向上半空间辐射,与电离层和所经路径上的散射体相互作用后,其后向散射信号又以原路径回到雷达,并对雷达形成严重的自干扰.本文基于自适应天线理论,在对功率倒置算法改进的基础上,介绍了一种自适应对消电离层自干扰新方法,雷达现场观测实验表明,本方法可以抑制电离层自干扰.     

伽利略系统BOC信号的特性及码跟踪方法研究

为了节省卫星频率资源并提高导航信号的可靠性,新一代的导航定位系统采用了一种更有效的调制方式-BOC调制,它具有与BPSK之间串扰小、抗衰落能力强等诸多优点.但由于BOC调制信号特性比较复杂,因此加大了接收处理的难度.本文主要从理论上介绍了BOC和Alt-BOC的调制方式和信号产生方法、调制后信号的频谱特性以及自相关函数特性,依此分析了BOC信号自相关结果的多峰值特性和由此特性造成的跟踪和锁定难度的增加,以及相应于其频谱特性栽的信号处理方法.并在此基础上提出了一种能提高码跟踪可靠性的基带信号相关处理方法,Matlab仿真结果表明此方法有较好的效果,能提高码跟踪的可靠性.     

5GHz0．18μm CMOS功率放大器设计

文中介绍了一个基于TSMC 0．18μm CMOS工艺,可应用于802．11a无线局域网标准的功率放大器设计。该电路采用三级全差分结构,驱动级采用电阻并联负反馈网络来保证稳定性。在3．3V电源电压下,增益为16dB,输出1dB压缩点为17dBm,电路功耗为0．8 W,效率为18．1%。芯片面积为1．2mm×1．1 mm。     

湿度起伏对可见光波段Cn^2影响的再研究

用Li7500 CO_2/H_2O分析仪直接测量了近海边湿度起伏数据,结合温度脉动仪和超声风速计测量的数据,计算出湿度、温度和温湿相关项的结构常数,研究了湿度起伏对C_n~2的影响。结果表明:对于可见光,相对于温度起伏而言,湿度起伏和温湿相关项的贡献都很小。实验期间不论是白天还是夜晚,都有与Kolmogorov-5/3谱相近的温度谱和湿度谱存在,并且,在低波数区出现-1次方谱幂率,绝大部分湿度谱幂率值处于-5/3±0．2的区间内。