DCE-MRI定量参数对子宫内膜癌的诊断价值及与临床病理因素的相关性

本文选取了子宫内膜癌患者108例作为观察组,另选取子宫内膜良性病变患者105例作为对照组,均行DCE-MRI检查后发现,观察组容量转移常数(Ktrans)、速率常数(Kep)、血管外细胞外间隙容积比值(Ve)高于对照组(P＜0.05);Ktrans、Kep、Ve值联合诊断子宫内膜癌的曲线下面积(AUC)为0.841;K...     

电子焊料的工艺性能及影响因素

通过分析焊料在钎焊过程中的行为,提出了电子焊料的工艺性能主要包括熔化/固化温度、抗氧化性、润湿性和漫流性。给出了各工艺性能的定义。分析表明:相关的影响因素主要包括合金的组成、纯度和化学均匀性;母材的成分、性质和表面的洁净度;液态焊料的表面张力;钎焊温度、气氛、助焊剂的活性;液态焊料表面膜的组成、结构和性能等。     

Transition probabilities of the X1Σ+, A1Π, B1Δ, C1Σ+, and D1Π states of the AlO+ cation

ABSTRACT

This study computes the potential energy curves of the X¹Σ⁺, A¹Π, B¹Δ, C¹Σ⁺, and D¹Π states of AlO⁺ cation and the transition dipole moments between them. The orders of the rotationless radiative lifetimes are 10–100?μs for the A¹Π state, 1–1000?ms for the B¹Δ state, 10?ns for the first well and 100?ns for the second well of the C¹Σ⁺ state, and 1?μs for the D¹Π state. Emissions of the B¹Δ–A¹Π and D¹Π–C¹Σ⁺ systems are so weak that they are hardly measured via spectroscopy, the emissions of the C¹Σ⁺–X¹Σ⁺, C¹Σ⁺–A¹Π, and D¹Π–X¹Σ⁺ systems are so strong that they can be detected readily, and emissions of the A¹Π–X¹Σ⁺ and D¹Π–A¹Π systems can be observed through spectroscopy only by a significant effort. There is a strong great similarity between spontaneous emissions of the A¹Π–X¹Σ⁺ system of the AlO⁺ cation and the A²Π–X²Σ⁺ system of the AlO radical. The emissions of the A²Π–X²Σ⁺ system of the AlO radical have been measured in outer space Therefore, it is highly possible that the emissions of the A¹Π–X¹Σ⁺ system of the AlO⁺ cation can be detected in the astrophysical media.     

Standing wave-assisted acoustic droplet vaporization for single and dual payload release in acoustically-responsive scaffolds

An ultrasound standing wave field (SWF) has been utilized in many biomedical applications. Here, we demonstrate how a SWF can enhance drug release using acoustic droplet vaporization (ADV) in an acoustically-responsive scaffold (ARS). ARSs are composite fibrin hydrogels containing payload-carrying, monodispersed perfluorocarbon (PFC) emulsions and have been used to stimulate regenerative processes such as angiogenesis. Elevated amplitudes in the SWF significantly enhanced payload release from ARSs containing dextran-loaded emulsions (nominal diameter: 6 μm) compared to the -SWF condition, both at sub- and suprathreshold excitation pressures. At 2.5 MHz and 4 MPa peak rarefactional pressure, the cumulative percentage of payload released from ARSs reached 84.1 ± 5.4% and 66.1 ± 4.4% under + SWF and -SWF conditions, respectively, on day 10. A strategy for generating a SWF for an in situ ARS is also presented. For dual-payload release studies, bi-layer ARSs containing a different payload within each layer were exposed to temporally staggered ADV at 3.25 MHz (day 0) and 8.6 MHz (day 4). Sequential payload release was demonstrated using dextran payloads as well as two growth factors relevant to angiogenesis: basic fibroblast growth factor (bFGF) and platelet-derived growth factor BB (PDGF-BB). In addition, bubble growth and fibrin degradation were characterized in the ARSs under +SWF and -SWF conditions. These results highlight the utility of a SWF for modulating single and dual payload release from an ARS and can be used in future therapeutic studies.     

Revisiting radiative leptonic B decay

In this paper, we summarize the existing methods of solving the evolution equation of the leading-twist \begin{document}$B$\end{document}-meson LCDA. Then, in the Mellin space, we derive a factorization formula with next-to-leading-logarithmic (NLL) resummation for the form factors \begin{document}$F_{A,V}$\end{document} in the \begin{document}$B \to \gamma \ell\nu$\end{document} decay at leading power in \begin{document}$\Lambda/m_b$\end{document}. Furthermore, we investigate the power suppressed local contributions, factorizable non-local contributions (which are suppressed by \begin{document}$1/E_\gamma$\end{document} and \begin{document}$1/m_b$\end{document}), and soft contributions to the form factors. In the numerical analysis, which employs the two-loop-level hard function and the jet function, we find that both the resummation effect and the power corrections can sizably decrease the form factors. Finally, the integrated branching ratios are also calculated for comparison with future experimental data.     

地方高校化学师范生对教师职业认同现状及影响因素调查研究

采用问卷和访谈的方式对化学师范生对教师职业认同情况进行了调查。结果表明：化学师范生对教师职业认同总体水平较高;教师职业认同水平在性别上差异不显著;教师职业认同水平在年级上差异显著,大一师范生的认同水平较高。根据调查结果,分析了化学师范生对教师职业认同的影响因素,并就提升化学师范生对教师职业认同提出了建议。     

微波消解-电感耦合等离子体发射光谱(ICP-OES)法测生物质中的碱金属和碱土金属

为研究并解决测试生物质样品中碱金属和碱土金属含量的干扰,采用微波消解-电感耦合等离子体发射光谱(ICP-OES)法对生物质中的碱金属和碱土金属钾、钙、钠、镁元素进行测定,考察了样品消解后不同的酸体系,共存元素干扰对钾、钠、钙、镁含量测定的干扰研究。经过研究表明,接近分析标准曲线酸浓度的样品干扰小,铅、铟、钛、锰元素对钠元素测定造成干扰,砷、铜、镉对钙元素测定干扰,铝对钾元素测定有干扰,镁测定不受共存元素干扰影响,运用干扰系数法可以减少共存元素对测定元素的误差。各待测元素标准曲线相关系数大于0.9996,检出限为0.0014~0.023 mg/L,玉米芯各元素的相对标准偏差为0.98%~1.9%,加标回收率为80.2%~106%;西瓜皮的各元素相对标准偏差为0.91%~2.3%,加标回收率为85.3%~106%。方法用于测定国家标准物质GBW07603,各元素结果均在标准值参考范围内。方法用于测定生物质中碱金属和碱土金属的结果,用t检验法与离子色谱测定值进行比对,结果无显著性差异。     

基于元素指纹的白术产地溯源及其与土壤的相关性研究

本研究主要采用电感耦合等离子体质谱仪(ICP-MS)等手段测定5个产地白术41种矿质元素含量和土壤41种化学成分指标, 结合聚类分析法、偏最小二乘判别分析(PLS-DA)法和Pearson相关性分析研究了不同产区白术矿质元素特征以及不同产区土壤因子的差异, 并对它们的相关性进行了探讨. 结果表明, 采用无监督的聚类分析和有监督的PLS-DA均能正确判别不同产地的白术和土壤, 其中稀土元素在浙江白术与土壤间呈正相关. 另外, Li、V、Mn、Co、Cu、Rb、Cd、Cs、Ba等微量元素是白术产地溯源的关键因素. 研究发现在白术生产实践中可以通过适量控制种植地的土壤湿度、增施特定肥料等措施调控白术矿质元素含量. 本研究将为解释道地白术的品质形成机制, 保证白术药效质量的有效性提供一定帮助.     

“元素化学实验”中的“异常”现象(一)--Mn元素化学实验中的“异常”现象及其探析

大一学生在“元素化学实验”教学过程中,对反应条件如温度、催化剂、酸度、浓度或试剂用量等因素的影响考虑不周,可能出现某些实验现象和预想的或理论分析的结果不一致的“异常”现象。本文就学生在Mn元素化学实验过程中遇到的一些“异常”现象进行分析和总结,借助生动直观的演示实验,引导学生探究“异常”现象产生的可能原因和直观认识反应条件对反应结果的影响,培养学生的观察、分析、判断、归纳、推理和解决实际问题的能力。     

高中学业水平考试试题难度模型建构*

利用主成分分析方法厘清试题难度影响因素之间的关系,进而从问题表征、问题解决和结果输出等3个维度上建立了影响高中学业水平考试试题难度的主要因素。通过编写高中学业水平考试测试题进行实证研究,建立影响因素常见呈现类型的难易赋值规则。选用机器学习的线性回归方法建构试题难度分析模型,并使用高考化学江苏卷部分试题的实测难度数据进行校验,模型难度预测值和高考难度实测值具有较好的拟合度,表明模型具有较好的应用价值和推广意义。