Determination of Dimethyl Sulfide in Gas Samples by Single Photon Ionization Time of Flight Mass Spectrometry

It is difficult to determine sulfur-containing volatile organic compounds in the atmosphere because of their reactivity. Primary off-line techniques may suffer losses of analytes during the transportation from field to laboratory and sample preparation. In this study, a novel method was developed to directly measure dimethyl sulfide at parts-per-billion concentration levels in the atmosphere using vacuum ultraviolet single photon ionization time-of-flight mass spectrometry. This technique offers continuous sampling at a response rate of one measurement per second, or cumulative measurements over longer time periods. Laboratory prepared samples of different concentrations of dimethyl sulfide in pure nitrogen gas were analyzed at several sampling frequencies. Good precision was achieved using sampling periods of at least 60 seconds with a relative standard deviation of less than 25%. The detection limit for dimethyl sulfide was below the 3 ppb olfactory threshold. These results demonstrate that single photon ionization time-of-flight mass spectrometry is a valuable tool for rapid, real-time measurements of sulfur-containing organic compounds in the air.     

Interlayer shear strength of single crystalline graphite

Reported values(0.2 MPa-7.0 GPa) of the interlayer shear strength(ISS) of graphite are very dispersed.The main challenge to obtain a reliable value of the ISS using conventional measuring methods was the unavailability of sufficiently large single crystalline graphite.Here we present a novel experimental method to measure the ISS,and obtain the value as ～0.14 GPa.Our result can serve as an important basis for understanding mechanical behavior of graphite or graphene-based materials.     

Solution processable PEDOT:PSS based hybrid electrodes for organic field effect transistors

We report high performance solution processed conductive inks used as contact electrodes for printed organic field effect transistors (OFETs). Poly(3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT:PSS) electrodes show highly improved very low sheet resistance of 65.8 ± 6.5 Ω/square (Ω/□) by addition of dimethyl sulfoxide (DMSO) and post treatment with methanol (MeOH) solvent. Sheet resistance was further improved to 33.8 ± 8.6 Ω/□ by blending silver nanowire (AgNW) with DMSO doped PEDOT:PSS. Printed OFETs with state of the art diketopyrrolopyrrole-thieno[3,2-b]thiophene (DPPT-TT) semiconducting polymer were demonstrated with various solution processable conductive inks, including bare, MeOH treated PEDOT:PSS, single wall carbon nanotubes, and hybrid PEDOT:PSS-AgNW, as the source and drain (S/D) electrode by spray printing using a metal shadow mask. The highest field effect mobility, 0.49 ± 0.03 cm² V⁻¹ s⁻¹ for DPPT-TT OFETs, was obtained using blended AgNW with DMSO doped PEDOT:PSS S/D electrode.     

Single crystal synthesis and magnetism of the BaLn2O4 family (Ln = lanthanide)

The series of compounds in the BaLn₂O₄ family (Ln = La–Lu, Y) has been synthesized for the first time in single crystalline form, using a molten metal flux. The series crystallizes in the CaV₂O₄ structure type with primitive orthorhombic symmetry (space group Pnma, #62), and a complete structural study of atomic positions, bonds, angles, and distortions across the lanthanide series is presented. With the exception of the Y, La, Eu, and Lu members, magnetic susceptibility measurements were performed between 2 K and 300 K. BaCe₂O₄ and BaYb₂O₄ display large crystal fields effects and suppression of magnetic ordering. All compounds show signs of magnetic frustration due to the trigonal arrangements of the trivalent lanthanide cations in the structure.     

The formation of an oscillating system during the sputtering of sapphire single crystal with pulsed glow discharge

Sapphire (α-Al₂O₃, transparent corundum) single crystals were analyzed with pulsed direct current glow discharge mass spectrometry. Combined hollow cathode was used as a discharge cell. To obtain stable sputtering of dielectric material, a formation of initial surface conductivity via preliminary vacuum deposition of thin metallic layer was proposed. Al and Ta film of different thickness (30–200 nm) were considered for this purpose. The approach was found to provide the effective sputtering of dielectrics. The formation of an oscillating system was shown during the sputtering of sapphire samples in a tantalum combined hollow cathode cell. For oriented sapphire single crystals, periodic oscillations of ²⁷Al⁺ intensity were acquired. This phenomenon was observed only for dielectric single crystals and not for other dielectric samples, e.g. alumina ceramic or fused quartz. The linear dependence of oscillation period on the duration of discharge pulse was found. The origin of these oscillations seems to be attributed to periodic fluctuations of surface conductivity. Oscillation periods calculated for two different orientations of sapphire single crystals (001 and 012) were found to be proportional to the main period of sapphire lattice. Therefore, an assumption that the crystal internal structure of the sample might be the cause of the oscillations is discussed.     

A continuum model for intermittent deformation of single crystal micropillars

Strain bursts are often observed during compression tests of single crystal micropillars. In this work, we formulate a new continuum model that accounts for the strain bursts within the framework of crystal plasticity. The strain bursts are separated from the loading stage (nearly elastic loading) by introducing a dimensionless constant in the continuum model, and are detected by load serrations. The boundary conditions in the context of micropillar compression are studied and they are shown to be changing and unpredictable as plastic deformation proceeds. To evaluate the validity of our model, finite element simulations of the uniaxial compression tests on nickel micropillars are performed. Our simulations produce clearly visible strain bursts during the plastic flow and the produced intermittent flows are comparable with the experimental observations. For the bulk crystal, a series of strain bursts is identified in the course of plastic flow, despite an apparently smooth stress–strain response. We also show that the intermittent flow is intensified in the micrometer-scale due to both increasing numbers of the successive strain bursts and increasing amplitude of the strain burst, when the specimen size decreases. Finally, we show that the occurrences of the strain bursts are always associated with negative values of the second-order work.     

液体空分流程形式浅析

通过对全液体空分装置不同流程组织形式进行分析和模拟计算、能耗与投资的比较,根据不同规格的产品要求,进行合适的流程形式选择,以可达到节能降耗的目的。     

Solution-processed high-performance photodetector based on a new triisopropylsilylethynyl anthracene derivative

A new triisopropylsilylethynyl anthracene derivative was synthesized with extended aromatic groups at the 2- and 6-positions of anthracene for application in a high-performance photodetector. To optimize charge transport characteristics and photodetection ability, single crystal with high aspect ratio was employed as photo-active semiconductor layer. When operated at room temperature under ambient conditions, the photodetector based on a single crystal showed a sensitive response to green light, with a responsivity >10 A/W and specific detectivity on the order of 10¹¹ Jones. Based on a systematic analysis of the photocurrent behavior as a function of the interfacial properties, illuminated optical power and the applied bias, the operating mechanism of the photodetector was found to be a gain-generation process.     

A new nonlinear optical silicate carbonate K2Ca[Si2O5](CO3) with a hybrid structure of kalsilite and soda-like layered fragments

Single crystals of a new silicate carbonate, K₂Ca[Si₂O₅](CO₃), have been synthesized in a multi-components hydrothermal solution with a pH value close to neutral and a high concentration of a carbonate mineralizer. The new compound has an axial structure (s.g. P6₃22) with unit cell parameters a = 5.04789 (15), c = 17.8668 (6) Å. Pseudosymmetry of the structure corresponds to s.g. P6₃/mmc which is broken only by one oxygen position. The structure consists of two layered fragments: one of the type of the mineral kalsilite (KAlSiO₄) and the other of the high-temperature soda-like α-Na₂CO₃, Ca substituting for Na. The electro-neutral layer K₂[Si₂O₅] (denoted K) as well as the layer Ca(CO₃) (denoted S) may separately correspond to individual structures. In K₂Ca[Si₂O₅](CO₃) the S-K layers are connected together via Ca-O interactions between Ca atoms from the carbonate layer and apical O atoms from the silicate one, and also via K-O interlayer interactions. A hypothetical acentric structure, sp.gr. P-62c, is predicted on the basis of the order-disorder theory. It presents another symmetrical option for the arrangement of K-layers relative to S-layers. The K,Ca-silicate-carbonate powder produces a moderate SHG signal that is two times larger that of the α-quartz powder standard and close to other silicates with acentric structures and low electronic polarizability.     

On the inclusion of collisional correlations in quantum dynamics

We present a formalism to describe collisional correlations responsible for thermalization effects in finite quantum systems. The approach consists in a stochastic extension of time dependent mean field theory. Correlations are treated in time dependent perturbation theory and loss of coherence is assumed at some time intervals allowing a stochastic reduction of the correlated dynamics in terms of a stochastic ensemble of time dependent mean-fields. This theory was formulated long ago in terms of density matrices but never applied in practical cases because of its complexity. We propose here a reformulation of the theory in terms of wave functions and use a simplified 1D model of cluster and molecules allowing to test the theory in a schematic but realistic manner. We illustrate the performance in terms of several observables, in particular global moments of the density matrix and single particle entropy built on occupation numbers. The occupation numbers remain fixed in time dependent mean-field propagation and change when evaluating the correlations, then taking fractional values. They converge asymptotically towards Fermi distributions which is a clear indication of thermalization.