基于EWB的D/A数模转换器的仿真研究

阐述了D／A转换器的仿真原理，给出了T形电阻网络D／A转换器仿真模型的构造方法，并采用EWB进行了系统仿真，仿真结果表明该方法是合理、可行的。     

光链路设计的Java小程序实现

介绍光链路设计的原理和公式 ,给出光链路设计的Java小程序实现 ,以期有效解决在手工进行光链路设计及计算中存在的问题。     

6to4与ISATAP技术相结合的IPv6网络实现

在IPv4向IPv6过渡期间,多种过渡技术可以互相支持、互相组合使用,以达到互利互助。简要介绍了其中2种隧道技术:6to4技术和ISATAP技术,提出了1种基于两者结合的新型实验网络的实现方案。具体讨论了在Linux下如何组建这种新型实验网络平台,详细阐明了如何配置IPv6主机以及双栈路由器,为IPv4过渡到IPv6提供1个可行的方案。     

Electrode “edge effects” analyzed by the Green function method

An exact method based on Green's equation is used to find the diffusion-controlled faradaic current for certain electrode geometries that incorporate edges and vertices. Thereby the magnitudes of the time-independent current density associated with angled electrode/electrode and electrode/insulator junctions are calculated. As well, the square-root-of-time-dependent currents associated with vertices, receive attention. These terms extend to longer times, the Cottrell formulation appropriate for short times. Though most of the problems solved here have been tackled previously, the novel Green function approach is shown to be straightforward and intuitive.     

Performance of noise barriers with various edge shapes and acoustical conditions

The performances of barriers having different shapes and surface conditions were tested using the boundary element method in a well-controlled environment. The heights and widths of the barriers were standardized and the insertion losses for six receiver positions were averaged and compared. Figures displaying the results allow for straightforward barrier performance estimation. It was shown that absorbing and soft edges significantly improve the efficiency of the barrier, but configuration modifications provide only a slight improvement. The soft T-shaped barrier produces the highest performance. A 3 m high T-shaped barrier provides the same performance as a 10 m high plain barrier. The spectral efficiency was also investigated. The insertion loss spectra for the absorbing and the soft barriers exhibit a similar shape, but the rigid barrier differs from these two.     

低噪声晶振16次倍频源

本文介绍了低噪声高次倍频器的设计原理及低相位噪声晶振１６次倍频信号源。     

128×128元IRCCD成像技术

研制成功了１２８×１２８元ＰｔｓｉＩＲＣＣＤ，获得了清晰的室温目标热像。文章叙述了该摄像机驱动逻辑电路的设计、驱动方式的研究和视频信号、数字信号的处理。     

调制不稳定性对级联放大光纤传输系统信噪比的影响

在考虑光纤损耗和级联放大器的情况下，推导了调制不稳定性的产生条件和增益的普适解析表达式，分析了调制不稳定性对信噪比的影响，给出了一个新的计算信噪比的表达式。     

耦合模模型的峰峰值与有效值

介绍了峰峰值和有效值的偶合模方程,给出了峰峰值P矩阵和有效值P矩阵的表达式。利用峰峰值P矩阵和有效值P矩阵模拟了纵向耦合谐振结构以及阻抗元结构的声表面波滤波器的频响。对比两种P矩阵的模拟结果,说明了峰峰值耦合模方程和有效值耦合模方程分析频响的等效性。     

热电厂锅炉运行技术指标的微机管理

本文从锅炉运行技术指标台帐微机管理的实际出发，提出了热量计算中主蒸汽流量修正系数Ｃ和给水焓值Ｚ两项参数回归的计算公式，提高了热量计算数值精度。