Giant shot-like voltage noise in high current density Nb–AlOx–Nb superconducting tunnel junctions

The flat voltage noise component of current biased, high-transparency Nb/AlO_x/Nb superconducting tunnel junctions has been investigated at frequencies up to 70 kHz. Several aspects of the analyzed phenomena suggest the presence of current noise effects induced by the discreteness of the charge carriers. At subgap voltages, where excess currents occur, a behavior coherent with a multiple Andreev reflection-assisted transport through the tunnel barrier has been found. However, the measured charge values exceed any theoretical prediction.     

线性常微分方程的保线性变换及其应用

研究了线性常微分方程的保线性变换，得到任意两个二阶线性常微分方程等价的条件，并用于求解一类二阶线性变系数齐次常微分方程．对数学物理方法教学中怎样通过适当的变换把给定的二阶线性变系数齐次常微分方程化为可解的方程给出了合理解释。     

Noise emitted by water supply installations

This work deals with the problem of noise generated by water supply systems in homes. Measurements were made in situ to determine normal conditions of installations and noise levels generated in different rooms in the home. In order to determine the sources of noise and the best construction methods to minimise noise generation, a laboratory was also built to reproduce the conditions of this type of installation in homes. Tests were carried out in this laboratory on different configurations of type of tap, installation material, walling and fastening of the installation, to allow quantitative determination of the differences in noise generation between the various configurations used in households.     

A boundary element method for the calculation of noise barrier insertion loss in the presence of atmospheric turbulence

Atmospheric turbulence is an important factor that limits the amount of attenuation a barrier can provide in the outdoor environment. It is therefore important to develop a reliable method to predict its effect on barrier performance. The boundary element method (BEM) has been shown to be a very effective technique for predicting barrier insertion loss in the absence of turbulence. This paper develops a simple and efficient modification of the BEM formulation to predict the insertion loss of a barrier in the presence of atmospheric turbulence. The modification is based on two alternative methods: (1) random realisations of log-amplitude and phase fluctuations of boundary sources and (2) de-correlation of source coherence using the mutual coherence function (MCF). An investigation into the behaviours of these two methods is carried out and simplified forms of the methods developed. Some systematic differences between the predictions from the methods are found. When incorporated into the BEM formulation, the method of random realisations and the method of MCF de-correlation provide predictions that agree well with predictions by the parabolic equation method and by the scattering cross-section method on a variety of thin barrier configurations.     

Three methods for analyzing forced vibration of a fluid-filled cylindrical shell

The forced vibration of an infinite elastic circular cylindrical shell filled with fluid is studied. Three methods are employed to analyze the forced vibration problem of this shell-fluid coupled system, that is, wave propagation approach (wave mode superposition), theorem of residues and a numerical integral method. In order to explain these methods more explicitly, before being used to investigate the vibration of an infinite fluid-filled elastic circular cylindrical shell, all these three methods are employed firstly to analyze the forced vibration problem of an infinite beam and an infinite elastic circular cylindrical shell in vacuo. Advantage and disadvantage of these three methods are discussed and their interesting relationship is revealed. That is, to any circumferential wavenumber and frequency of the external force, there is an unchangeable relationship between the general coordinates of various waves in the wave propagation approach and the residuals in the theorem of residues.     

Low noise double pass L-band erbium-doped fiber amplifier

A new double pass long wavelength band erbium-doped fiber amplifier with enhanced noise figure characteristics is demonstrated. The noise figure is improved by about 2.6 dB with the incorporation of broadband conventional-band fiber Bragg grating (FBG) in between the two segments of erbium-doped fiber. By incorporating both the pre-amplifier and the FBG, the noise figure is further improved, which varies from 4.0 to 5.0 dB in the flat gain region from 1570 to 1600 nm. The gain varies from 32.0 to 33.4 dB within this region. The new amplifier with high gain and low noise figure can be useful as an inline amplifier in a wavelength division multiplexing transmission system.     

Robust Space Time Receiver for CDMA-based Antenna Arrays

In this paper, we propose a new robust code division multiple access (CDMA) receiver of which weight vector is obtained by projecting the effective spatio-temporal signature waveform onto the signal subspace of the data covariance matrix. We verified our proposed algorithm by the field measured data obtained with a custom-built wideband CDMA test-bed. It will be shown that the proposed algorithm is robust to the signal mismatch.     

Thermal degradation of two liquid fuels and detonation tests for pulse detonation engine studies

The use of liquid fuels such as kerosene is of interest for the pulse detonation engine (PDE). Within this context, the aim of this work, which is a preliminary study, was to show the feasibility to initiate a detonation in air with liquid-fuel pyrolysis products, using energies and dimensions of test facility similars to those of PDEs. Therefore, two liquids fuels have been compared, JP10, which is a synthesis fuel generally used in the field of missile applications, and decane, which is one of the major components of standard kerosenes (F-34, Jet A1, ...). The thermal degradation of these fuels was studied with two pyrolysis processes, a batch reactor and a flow reactor. The temperatures varied from 600°C to 1,000°C and residence times for the batch reactor and the flow reactor were, respectively, between 10–30 s and 0.1–2 s. Subsequently, the detonability of synthetic gaseous mixtures, which was a schematisation of the decomposition state after the pyrolysis process, has been studied. The detonability study, regarding nitrogen dilution and equivalence ratio, was investigated in a 50 mm-diameter, 2.5 m-long detonation tube. These dimensions are compatible with applications in the aircraft industry and, more particularly, in PDEs. Therefore, JP10 and decane were compared to choose the best candidate for liquid-fuel PDE studies. This paper was based on work that was presented at the 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Canada, July 31 – August 5, 2005.     

CROSS-SPECTRAL MOMENT AND SVD METHODS ESTIMATING THE PARAMETERS OF CLOSE SINUSOIDS IN COLORED NOISE

The cross-spectral estimation methods are efficient in estimating the parameters of sinusoidal signals embedded in colored noise. But up to now, only FPT and cross-periodogram methods are used in this field, the modern auto-spectral estimation method is introduced into cross-spectral estimation in this paper, meanwhile the cross-correlation based Yule-Walker equation is proposed theoretically and the moment and singular-value decomposition (SVD)) algorithms for cross-spectral estimation have been developed. Finally, a numerical example is given for comparing the presented methods with the well-known Cadzow's SVD method.     

Signal averaging in gas chromatography

Ensemble or signal averaging, and the use of the technique for the solution of some unique problems with minimum sample handling, have previously been reported. The capability of the technique has been evaluated with microbore gas chromatography for the fast handling of a large number of analyses: ca 20–30 replicate injections are easily attainable in a reasonable analysis time. The implementation of the signal averaging technique with other concentration techniques for improving detection limits is also demonstrated.