Evaluation of behaviour of linear monoamines CH3-(CH2)n−1-NH2 (n=1-6) in ion chromatography

This paper reports the results on a study of ion chromatography (IC) behaviour on strong cationic exchange column of CH₃-(CH₂)_n−1-NH₂ (n=1-6) type linear monoamines. The eluents were mixtures of HCl-NaCl, HNO₃-NaNO₃, HClO₄-NaClO₄, H₂SO₄-Na₂SO₄, HClO₄-NaClO₄-CH₃CN. Amines were revealed with an amperometric detector. The influence of different counter-ions on retention factors, k′, is discussed. Relationships between k′ and pE (E=sum of Na⁺ and H⁺ concentrations), and length of alkylic chain, and sensitivity coefficient S, are reported and discussed. The addition of acetonitrile (ACN) in the eluent was also taken into account. Suitable considerations are derived from these data. An example of monoamines separation is given.     

烟碱分子烙印聚合物的吸附特性

利用分子烙印技术，以烟碱为烙印分子，甲基丙烯酸(MAA)为功能单体，乙二醇二甲基丙烯酸酯(EDMA)为交联剂，合成了对烟碱具有特异性作用的分子烙印聚合物P(Nic)；通过平衡吸附实验，评价了其对烟碱的亲和力和选择性。与非烙印聚合物相比，P(Nic)对烟碱表现了很高的亲和力；Scatchard分析表明在P(Nic)中存在对烟碱有不同的亲和力的两类作用位点。通过与氨基吡啶类物质在P(Nic)上的吸附行为比较，表明P(Nic)对烟碱具有很好的选择性。本工作证明了用P(Nic)作为固相萃取(SPE)材料选择性地从烟草烟雾中提取烟碱的可能性。     

Decomposition of Toluene and Acetone in Packed Dielectric Barrier Discharge Reactors

The influences of TiO₂ catalytic material and glass pellet packing on the decomposition efficiency of toluene and acetone in air by dielectric barrier discharge (DBD) reactors were experimentally investigated in this study. The effects of both packing materials on the formation of byproducts such as CO and CO₂ were also evaluated. Experimental results indicate that the introduction of glass materials into the plasma zone of a wire-tube reactor would improve the decomposition efficiency of toluene and acetone compared to a nonpacked reactor. The apparent decomposition rate constant of a glass packed-bed reactor was 4.5–4.8 times greater than that of a nonpacked reactor. The results also indicate that the decomposition rate constant of toluene was approximately 2.6 times higher than that of acetone no matter which type reactor was utilized. The application of TiO₂ coated pellets in DBD reactors will enforce the hydrocarbon byproducts to further be oxidized to CO₂, notwithstanding, it will not significantly improve the performance of the reactors in the decomposition of toluene and acetone, and in the formation of CO. The results show that the best selectivity of CO₂ for acetone decomposition in a TiO₂ coated pellets packed-bed reactor was approximately 40% higher than that in a glass packed-bed reactor.     

Room temperature deposition of nanocrystalline cadmium peroxide thin film by electrochemical route

Nanocrystalline cadmium peroxide thin film has been electrodeposited on indium doped tin oxide glass substrate from aqueous solution at room temperature. The grain size of the nanocrystals of the film is estimated from XRD and is about 14 nm. The deposits are decomposed at 228 °C by formation of CdO, releasing plentiful heat at same time. The band-gap of the nanocrystalline CdO film made from decomposition of electrodeposited CdO₂ is around 2.4 eV.     

Preparation, characterization and properties studies of quinine-imprinted polymer in the aqueous phase

The uniform-sized spherical molecularly imprinted polymers were successfully prepared through molecular imprinting technology by two-step seed swelling and mini-emulsion polymerization in the aqueous condition using quinine as template molecules and methacrylic acid (MAA) as functional monomer. The polymers were characterized by IR spectra, thermal-weight analysis, scanning electron microscope and laser particle size analysis. The properties of imprinted polymers were investigated in different organic phases and aqueous media. In the organic media, results suggested that polar interactions (hydrogen bonding, ionic interactions) between acidic monomer/polymer and template molecules are mainly responsible for the binding and recognition; whereas in the aqueous medium, a considerable recognition effect was also obtained where the ionic (electrostatic) interaction and hydrophobic interaction play an important role. The experiments of binding different substrates indicated that the MIPs possessed an excellent rebinding ability and inherent selectivity to quinine. __________ Translated from Zhongshan Dcocue Xuebao/Acta Scientianum Natralium University Sunyatseni, 2005, 44(3)(in Chinese)     

On-channel base stacking in microchip capillary gel electrophoresis for high-sensitivity DNA fragment analysis

We evaluated a novel strategy for high-sensitivity DNA fragment analysis in a conventional glass double-T microfluidic chip. The microchip allows for a DNA on-channel concentration based on base stacking (BS) with a microchip capillary gel electrophoretic (MCGE) separation step in a poly(vinylpyrrolidone) (PVP) sieving matrix. Depending if low conductivity caused a neutralization reaction between the hydroxide ions and the run buffer component Tris+, the stacking of DNA fragments were processed in the microchip. Compared to a conventional MCGE separation with a normal electrokinetic injection, the peak heights of 50-2650-base pair (bp) DNA fragments on the MCGE-BS separation were increased 3.9-8.0-fold. When we applied the MCGE-BS method to the analysis of a clinical sample of bovine theileria after PCR reaction, the peak height intensity of the amplified 816-bp DNA fragment from the 18S rRNA of T. buffeli was enhanced 7.0-fold compared to that of the normal injection method.     

Sol-gel approach to in situ creation of high pH-resistant surface-bonded organic-inorganic hybrid zirconia coating for capillary microextraction (in-tube SPME)

A novel zirconia-based hybrid organic-inorganic sol-gel coating was developed for capillary microextraction (CME) (in-tube SPME). High degree of chemical inertness inherent in zirconia makes it very difficult to covalently bind a suitable organic ligand to its surface. In the present work, this problem was addressed from a sol-gel chemistry point of view. Principles of sol-gel chemistry were employed to chemically bind a hydroxy-terminated silicone polymer (polydimethyldiphenylsiloxane, PDMDPS) to a sol-gel zirconia network in the course of its evolution from a highly reactive alkoxide precursor undergoing controlled hydrolytic polycondensation reactions. A fused silica capillary was filled with a properly designed sol solution to allow for the sol-gel reactions to take place within the capillary for a predetermined period of time (typically 15-30 min). In the course of this process, a layer of the evolving hybrid organic-inorganic sol-gel polymer got chemically anchored to the silanol groups on the capillary inner walls via condensation reaction. At the end of this in-capillary residence time, the unbonded part of the sol solution was expelled from the capillary under helium pressure, leaving behind a chemically bonded sol-gel zirconia-PDMDPS coating on the inner walls. Polycyclic aromatic hydrocarbons, ketones, and aldehydes were efficiently extracted and preconcentrated from dilute aqueous samples using sol-gel zirconia-PDMDPS coated capillaries followed by thermal desorption and GC analysis of the extracted solutes. The newly developed sol-gel hybrid zirconia coatings demonstrated excellent pH stability, and retained the extraction characteristics intact even after continuous rinsing with a 0.1 M NaOH solution for 24 h. To our knowledge, this is the first report on the use of a sol-gel zirconia-based hybrid organic-inorganic coating as an extraction medium in solid phase microextraction (SPME).     

ROK101007蓝牙模块及其在无线火灾自动报警系统中的应用

ROK101007是Ericsson公司生产的一种实现蓝牙功能的中短距离通信模块.从应用的角度出发,将ROK101007作为通信模块集成到无线火灾自动报警系统中,对蓝牙技术在火灾报警中的应用进行了探讨和研究,并给出了火灾自动报警系统原理框图和ROK101007与单片机及上位机的接口电路,及相应的主要软件设计方法.     

LTCC基板制造工艺研究

低温共烧多层陶瓷（ＬＴＣＣ）基板是制造复杂微电子产品多芯片组件（ＭＣＭ）的重要部件。详细地讨论了ＬＴＣＣ基板制造工艺，介绍了多年研究之经验及国外的有关技术，还指出了目前工艺中存在的技术问题及在工艺水平上与国外的差距。采用目前工艺，可做出２０层布线、线宽及间距均为０．２０ｍｍ、８０ｍｍ×８０ｍｍ的多层共烧基板     

S-5N全固态重复频率脉冲发生器

 主要介绍S-5N的结构及测试实验结果。S-5N型全固态重复频率脉冲发生器是目前国际上同类源中峰值功率和平均功率均为最大的一台。随负载大小的变化，S-5N脉冲发生器的输出电压为400～600kV，输出电流2～3kA，输出脉冲半高宽40～50ns，单脉冲输出能量40～65J。 S-5N脉冲发生器在300Hz重复频率条件下可连续工作，500Hz重复频率条件下可连续工作3min，平均输出功率高达30kW。