Measurement of small-signal and large-signal responses of packaged laser modules at high temperature

In this paper, the pulsed injection method is extended to measure the chip temperature of various packaged laser modules, such as the DFB laser modules, the FP laser modules, and the EML laser modules. An optimal injection condition is obtained by investigating the dependence of the lasing wavelength on the width and period of the injection pulse in a relatively wide temperature range. The small-signal frequency responses and large-signal performances of packaged laser modules at different chip temperature are measured. The adiabatic small-signal modulation characteristics of packaged LD are first extracted. In the large-signal measurement, the effects of chip temperature, bias current and driving signal on the performances of the laser modules are discussed. It has been found that the large-signal performances of the EML modules depend on the different red-shift speeds of the DFB and EAM sections as chip temperature varying, and the optimal characteristics may be achieved at higher temperature.     

10W QCW operation of a proton implanted GaAlAs diode laser array

We report one thick layer of hard-baked photoresist mask.The laser array stripe pattern was defined by standard wet lithography.With this mask, a 10 W QCW(quasi-continuous wave) operation of a narrow proton implanted multiple stripe conventional single quantum well separate confinement heterostructure(SQW-SCH) GaAlAs diode laser array has been realized.These devices exhibit the lateral far-field radiation pattern of a phase-locked array of gain-guided semiconductor injection laser array. The twenty stripe laser array has a lateral far-field beam divergence full width at half maximum (FWHM) of less than 3°, and three twenty stripe laser array has a beam divergence in the plane of the junction of about 9°.     

POM晶体倍频相位匹配角的设计及应用

计算了新型有机晶体ＰＯＭ的倍频匹配角，并将ＰＯＭ作为倍频器件用于超短光脉冲的测量中。     

新型显示器件进展

介绍了有源（光发射）和无源（光反射）显示器件－气体－电子－荧光粉显示，冷阴极场致发射矩阵平板显示、电泳成像显示和电化学显示器件等的发展情况。     

超导／半导兼容材料的制作及性能分析

介绍了几种结构合理的超导／半导兼容材料的制作技术及其测试结果，重点讨论了超导体（ＹＢＣＯ）与半导体（Ｓｉ，ＣａＡｓ）间缓冲层的选取，并对这几种复合材料的性能作了较详细的分析。     

柯伐镀金盖板电化学腐蚀的剖析及其防腐措施

对半导体器件封装的气密性失效进行了研究。发现，柯伐镀金盖板遭致电化学腐蚀是导致气密性失效的主要原因。对电解液的形成和电化学腐蚀机理进行了深入的分析。提出了防止腐蚀，提高器件气密可靠性的思路和方法。     

智能结构系统中的光纤传感技术

智能结构系统具有类似人体运动控制功能，埋置在工程结构或材料中便能获得顺应环境变化的自判断性、自适应性、自诊断性、自修复性等诸多性能。这一神奇的科学技术具有重大科学意义和广阔的应用前景。利用特性优良的光纤传感器可以构成一种特殊的光纤智能结构系统。本文较深入介绍适合智能结构系统的光纤多点式和分布式传感技术的原理、结构和实施方法。     

电流控制LPE生长In_（1－x）Ga_xAs_yP_（1－Y）

用电流控制液相外延（ＣＣＬＰＥ）方法首次在（１００）ＩｎＰ衬底上成功地生长出Ｉｎ１－ｘＧａｘＡｓｙＰ１－ｙ（０．３０＜ｘ＜０．４７，０．７０＜ｙ＜０．９６）外延层，并对外延层特性进行了详细研究，提出在ＩｎＰ衬底上生长电外延层的机理，推导出生长动力学的理论模型，该模型与上述实验结果十分吻合。     

多目标多约束的集成电路统计优化策略

对于集成电路设计、生产过程中的多目标、多约束统计优化问题,本文提出了“合格率足够高”的优化宗旨,并从概率论的基本原理出发,结合集成电路的特点,导出了一种合格率的近似表述方法,提出的变权重Monte Carlo法编程简便,效率高。采用这些优化策略设计的集成电路合格率优化系统取得了比较好的结果。     

曝光数据流优化问题的蒙特卡罗算法

集成工艺中控制图形发生器产生掩模图形的数据流文件的数据排列顺序优化,是一个其结点数可达数千个之多的大规模旅行商问题(从镜头架的位置,即每个矩形的矩心为结点),常规算法早已不适用。本文采用多阶段蒙特卡罗算法并加以改进,补充了“分层优化模式”,邻接结点的预合并和在各个阶段末提取共同子路径并删去相关结点等一系列逐步缩小问题规模的措施,形成了一个实用的优化算法。相应的软件已成功地应用于薄膜磁头的数据流文件的优化。