Improvement charge injection in P-type polymer field-effect transistors with low-cost molybdenum electrodes through dodecanoic acid self assembled monolayer

Most of the merit of organic thin film transistors (OTFTs) is that they can be manufactured using cost effective processes. However, expensive gold (Au) electrodes have usually been used as a source/drain (S/D), due to their benign energy level matching, high air stability, and easy patternability. In this article, we report a simple method for improving the charge injection from a low cost molybdenum (Mo) electrode to organic semiconductors in OTFTs by incorporating a dodecanoic acid (DA)–based self-assembled monolayer (SAM). The OTFT performance is remarkably improved when compared to the devices with a pristine Au electrode. The hole carrier mobilities (hole μ_FET) were ～0.13 (rr-P3HT), ～0.55 (PC12TV12T) and ～0.72 (P2100) cm²/V·sec.     

碳原子的再分布对铂上高质量单层石墨烯生长的影响

二维材料石墨烯以其独特的性质显示出在众多领域的应用潜力。化学气相淀积(CVD)作为最有效的生长单层石墨烯的方法得以良好发展。但在CVD方法中,频繁出现的多层石墨烯“点”严重影响单层石墨烯的有效面积,进而限制了石墨烯在很多场景中的应用。本文通过引入一个新的阶段-再分布阶段,使得在分解阶段溶解在铂片中的碳原子重新分布,进而减少了多层石墨烯“点”的数目。单层石墨烯的平均面积增加到16000μm₂,较未引入再分布阶段的单层面积增大了八倍。最后,拉曼光谱仪的测试结果说明了新方法下生长的石墨烯的高质量特征。     

基于不同自组装单层的酞菁氧钒薄膜晶体管

研究了不同界面修饰层对酞菁氧钒(VOPc)薄膜晶体管性能的影响。通过AFM图谱分析不同界面修饰层上VOPc薄膜的生长行为,通过半导体参数测试仪测试分析不同界面上器件的电学特性。实验结果表明,十八烷基三氯硅烷(OTS-18)修饰后生长的VOPc薄膜,比正辛基三氯硅烷(OTS-8)和苯基三氯硅烷(PTS)修饰后的薄膜晶体尺寸更大、质量更优;基于OTS-18修饰的底栅顶接触型VOPc有机薄膜晶体管,在4种结构器件中具有最高的场效应迁移率(0.51cm2/V·s),相对于未修饰的器件迁移率提高了近40倍。较长的烷基链能够有效地隔绝VOPc分子和二氧化硅之间的相互作用,利于形成大晶粒尺寸、少缺陷的优质薄膜,获得高迁移率的TFT器件。绝缘层表面自组装单分子层的厚度对其上薄膜的生长行为和相应器件的性能影响极为明显,这一结论对有机半导体薄膜生长和器件制备具有指导意义。     

Molecular Recognition of Aromatic Nitro Compounds at Cyclodextrin Dithiocarbamate-modified Electrodes

Silver electrodes were modified by the adsorption of α-, β-, and γ-cyclodextrin dithiocarbamates (2α–γ) and characterized by reductive desorption experiments. Their molecular recognition properties were studied by cyclic voltammetry using three families of positional isomers of aromatic nitro compounds. Electrodes modified with 2α and 2β were selective for meta and para isomers while 2γ showed little selectivity. These observations are explained in terms of cavity sizes and guest structure. Computational studies suggest that the main reason for the observed selectivity is the different position of the NO² group in ortho and para isomers with respect to the CD cavity.     

Efficient Two-Step Synthesis of 11,11′-Dithiobis[1-(2-bromo-2-methylpropionyloxy)undecane], a Conventional Initiator for Grafting Polymer Brushes from Gold Surfaces via ATRP

11,11′-Dithiobis[1-(2-bromo-2-methylpropionyloxy)undecane], a conventional initiator for grafting polymers from gold surfaces, was synthesized in two steps from 11-mercapto-1-undecanol in 88–92% overall yield. Oxidative dimerization of 11-mercapto-1-undecanol with a catalytic amount of sodium iodide and 30% hydrogen peroxide in ethyl acetate proceeded in 96% yield. Esterification with 2-bromoisobutyryl bromide in dichloromethane was clean and almost quantitative (92% yield) with pyridine used as base, whereas triethylamine gave a messy reaction (64% yield). Alternatively, esterification with 2-bromo-2-methyl-propanoic acid in dichloromethane occurred readily under Steglich's conditions with N,N′-dicyclohexylcarbodiimide (DCC) and a catalytic amount of dimethylaminopyridine (DMAP; 88% yield).     

Self-constructed stable liquid crystal alignment in a monomer-liquid crystal mixture system

Here, we demonstrate excellent liquid crystal (LC) vertical alignment without using an alignment layer printing process by introducing octadecyltrichlorosilane (OTS) into the LC mixture. Further, we investigated the alignment mechanism by analysing the surfaces of the substrates. The optimum concentration of OTS was found to be about 0.03 wt%, which is 1/100 of that in the previously reported polyhedral oligomeric silsesquioxane (POSS)–LC system. Moreover, the OTS–LC system exhibited a more stable LC alignment compared with the POSS–LC system. These differences may arise from the different strengths of surface–dopant interactions; that is, the covalent bond in the OTS–LC system and the van der Waals interactions in the POSS–LC system. We also demonstrated that the method can be used in a capillary tube, which may serve as a new method facilitating the application of LCs with curved surfaces.     

Synthesis of novel O-alkylbenzochromeno-1,5-benzodiazepinones. Study of the N–H····N and CO····HN hydrogen bonding interactions with 2-aminopyridines

A series of novel 6-(O-alky)lbenzochromeno-1,5-benzodiazepin-2-ones 4a–c was prepared through the condensation between the [1]benzopyrano[4,3-c][1,5]benzodiazepin-7(8H)one 1 and a series of alkylalcohols. Scaffold 4 exhibited interesting hydrogen-bonding interaction with 2-aminopyridine derivatives. The so obtained self-assembled systems 5 were fully characterized by 1D/2D-NMR techniques and mass spectrometry. The hydrogen-bonding interaction was supported by IR and Raman spectroscopy and by ¹H NMR titration experiments, and was confirmed by an X-ray crystal structure analysis.     

自组装多肽探针在磁共振成像中的应用

磁共振成像(MRI)是一种强大的非侵入式生物医学诊断技术. 临床上, MRI需要借助造影剂来提高成像质量, 从而提高诊断的准确性. 由于具有优越的信号放大能力和生物相容性, 自组装多肽探针可负载特定的MRI分子, 通过酶促自组装过程实现肿瘤靶向和特异性富集, 增强肿瘤病灶区MRI信号, 从而进一步提高MRI的准确性和灵敏度. 本综述总结了近年来多肽自组装探针在不同MRI模式( ¹H MRI, ¹⁹F MRI和双自旋核MRI)下的最新进展, 并展望了这类新型探针在MRI领域的应用前景.     

反式钙钛矿电池超薄空穴传输层研究进展

空穴传输层(HTLs)厚度对反式钙钛矿太阳能电池(PSCs)性能具有重大影响,因其显著影响太阳光透过和HTLs的空穴传输性能。几个纳米至十几个纳米厚度的超薄HTLs在减少伴生吸收、电荷传输损失和材料消耗等方面具有明显优势。目前,有许多成熟的制备超薄无机HTLs的方法,并在反式和叠层PSCs中得到广泛研究与应用。最近,一些关于有机超薄HTLs的新型制备方法也展现出良好的性能并逐渐引起相关领域研究者关注。在此,本文主要总结反式PSCs中超薄HTLs的研究进展与应用,关注其未来发展的挑战和方向,为该领域进一步的研究提供参考。