高层印制线路板正面临的对位挑战

封装工业正在推动着印制线路板技术水平朝着半导体要求的方向发展。高密度印制线路板正广泛用于网络路由器、自动测试设备和服务器领域。高密度要求(>150 IO/cm~2)正成为客户的普通需求。为满足现有的高密度封装要求,由于线宽、线距和通孔孔径正接近传统制作极限,普遍的方法就是不断增加印制线路板的层数。这些特征正驱动着印制线路板在基材、图像转移、蚀刻、电镀、阻焊、测试流程和对位系统的变化。此文主要讲述了印制线路板特性的变化趋势和利用对位模式和雷利分布去预测满足高级对位要求的能力以及印制线路板各流程中有关对准度的控制要点。     

非线性编辑中特效图文素材的应用

Cool 3D是一款特效图文制作软件，适用于动画片段、3D文字、图形等制作场合。Cool 3D中制作的特效素材应用于非线性编辑中，可以丰富素材的表现形式，提高节目编辑制作的整体质量。     

Temperature factor effect on the structure of the separated flow within a supersonic gas stream

The effect of the temperature factor, that is, the ratio of the body temperature to the freestream stagnation temperature, on the structure of the separated flow formed in the presence of a concave corner in a supersonic stream is studied. The strong influence of the temperature factor on the separation zone length and the flow-generated aerodynamic characteristics is established. It is shown that for fairly large deflection angles this flow cannot be described by free interaction, or triple deck, theory.     

LB技术制备大面积超薄PMMA抗蚀层的研究

采用自行研制的ＬＢ自动提膜装置，制备出大面积（１０×８ｃｍ２）、高质量的ＰＭＭＡ超薄抗蚀剂膜，并将其用于高分辨率铬掩模版的研制。通过电子束曝光，湿法蚀刻，制作了分辨率优于０．５μｍ，特征线宽０．３８μｍ的４（１００ｍｍ）铬掩模版。     

Monitoring of CdTe atomic layer epitaxy using in-situ spectroscopic ellipsometry

Atomic layer epitaxy or ALE has proven to be useful for the growth of epitaxial layers of high uniformity, good quality, and well-controlled thickness. In this study, we have carried out in-situ monitoring during the atmospheric pressure ALE of CdTe on GaAs (100) substrates using spectroscopic ellipsometry (SE). The susceptor temperature, reactant partial pressures, as well as the flow and flush duration for each precursor are crucial process variables for ALE growth. Growth was carried out for 20–25 cycles under different sets of these process conditions during the experiment and in-situ SE was used to verify the presence of layer-by-layer growth, which enabled the quick determination of the process window. We observed ALE growth of CdTe at 300°C, supporting the explanation that the growth of CdTe occurs via a surface catalyzed decomposition of the Te precursor di-isopropyltelluride (DIPTe). Investigation of ALE mode growth behavior for different susceptor temperatures and DIPTe flush times indicated that the growth was limited by competition between desorption and reaction of the adsorbed DIPTe species on the Cd terminated surface.     

Asymptotic analysis and estimates of blow‐up time for the radial symmetric semilinear heat equation in the open‐spectrum case

We estimate the blow‐up time for the reaction diffusion equation u_t=Δu+ λf(u), for the radial symmetric case, where f is a positive, increasing and convex function growing fast enough at infinity. Here λ>λ^*, where λ^* is the ‘extremal’ (critical) value for λ, such that there exists an ‘extremal’ weak but not a classical steady‐state solution at λ=λ^* with ∥w(?, λ)∥_∞→∞ as 0<λ→λ^*?. Estimates of the blow‐up time are obtained by using comparison methods. Also an asymptotic analysis is applied when f(s)=e^s, for λ?λ^*?1, regarding the form of the solution during blow‐up and an asymptotic estimate of blow‐up time is obtained. Finally, some numerical results are also presented. Copyright © 2007 John Wiley & Sons, Ltd.     

Number albedo measurements from stratified layers of iron,concrete and aluminium

A layer of stratified combination composed of selected radiation shielding materials acquires better shielding property. Albedo is used in such measurements as an integral measure ofγ-ray scattering. The stratified slabs of alternating heterogeneous layers have been found to have a virtual homogeneous property with a definite effective atomic number. The angular distribution of back-scattered photons as well as the total number albedo values for iron, aluminium and concrete in stratified combination for 662 keV and 1250 keV photons are reported.     

InGaAs（P）分别限制应变单量子阱激光器的优化设计

针对较常用的ＩｎＧａＡｓ（Ｐ）分别限制应变单量子阱激光器，给出了为得到最大净增益的优化设计参数。对于激射波长为１．５５μｍ的无应变激光器，最佳的光限制层波长为１．２４μｍ，厚度为１００ｎｍ。当阱材料引入压缩应变后．由于价带的有效状态密度减小，量子阱激光器的微分增益变大，阱深的增大对增大线性增益的效果更加明显．所以最佳光限制层的波长将变短，为１．２０μｍ     

A procedure for measuring the flexibility of single wood-pulp fibres

A way of determining the flexibility of wood-pulp fibres is developed, which involves i) a precise measurement of the topology of single-fibres by using a confocal laser scanning microscope and ii) the measurement of the elastic modulus of the fibres by using a single-fibre fatigue cell. Reported in this paper are the initial results of tests carried out on black spruce fibres, which have been subjected to three different levels of mechanical refining energy, namely ∼1100, 2300, and 3500 kWh/t. It is found that the fibre flexibility rises significantly between the first and second energy levels, but it does not change to the same degree between the second and third ones. The described procedure of measuring the flexibility of fibres may be used to establish the appropriate refiner energy necessary for the production of a specific grade of paper. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 1, pp. 115–128, January–February, 2006.     

半线性方程组边界层解的存在性

本文利用隐函数定理讨论了含小参数的半线性椭圆方程组边界层解的存在性．