Characterization of the organization in shear layers via the Proper Orthogonal Decomposition

Experiments are performed in an incompressible plane turbulent mixing layer, using various hot wire rake configurations. From these experiments, the Proper Orthogonal Decomposition is applied for kernels where the space-time correlation tensor is evaluated over different spatial meshes and velocity components configurations. The resulting decompositions are then discussed in terms of characterization of the organization of the flow for various scalar or vectorial approaches of the POD. An incrtial range law is evidenced. The instantaneous contribution of the first modes of the POD to the organization of the flow is analyzed. A dynamical behavior for the organization of the flow is observed from the correlation between the first two modes contribution.     

Tetrabutylammonium Bromide Functionalized Ti3C2Tx MXene as Versatile Cathode Buffer Layer for Efficient and Stable Inverted Perovskite Solar Cells

2D Ti₃C₂T_x MXene, possessing facile preparation, high electrical conductivity, flexibility, and solution processability, shows good application potential for enhancing device performance of perovskite solar cells (PVSCs). In this study, tetrabutylammonium bromide functionalized Ti₃C₂T_x (TBAB-Ti₃C₂T_x) is developed as cathode buffer layer (CBL) to regulate the PCBM/Ag cathode interfacial property for the first time. By virtue of the charge transfer from TBAB to Ti₃C₂T_x demonstrated by electron paramagnetic resonance and density functional theory, the TBAB-Ti₃C₂T_x CBL with high electrical conductivity exhibits significantly reduced work function of 3.9 eV, which enables optimization of energy level alignment and enhancement of charge extraction. Moreover, the TBAB-Ti₃C₂T_x CBL can effectively inhibit the migration of iodine ions from perovskite layer to Ag cathode, which synergistically suppresses defect states and reduce charge recombination. Consequently, utilizing MAPbI₃ perovskite without post-treatment, the TBAB-Ti₃C₂T_x based device exhibits a dramatically improved power conversion efficiency of 21.65% with significantly improved operational stability, which is one of the best efficiencies reported for the devices based on MAPbI₃/PCBM with different CBLs. These results indicate that TBAB-Ti₃C₂T_x shall be a promising CBL for high-performance inverted PVSCs and inspire the further applications of quaternary ammonium functionalized MXenes in PVSCs.     

Mitigating Detrimental Effect of Self-Doping Near the Anode in Highly Efficient Organic Solar Cells

Poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) has been one of the most established hole transport layers (HTL) in organic solar cells (OSCs) for several decades. However, the presence of PSS⁻ ions is known to deteriorate device performance via a number of mechanisms including diffusion to the HTL-active layer interface and unwanted local chemical reactions. In this study, it is shown that PSS⁻ ions can also result in local p-doping in the high efficiency donor:non-fullerene acceptor blends – resulting in photocurrent loss. To address these issues, a facile and effective approach is reported to improve the OSC performance through a two-component hole transport layer (HTL) consisting of a self-assembled monolayer of 2PACz ([2-(9H-Carbazol-9-yl)ethyl]phosphonic acid) and PEDOT:PSS. The power conversion efficiency (PCE) of 17.1% using devices with PEDOT:PSS HTL improved to 17.7% when the PEDOT:PSS/2PACz two-component HTL is used. The improved performance is attributed to the overlaid 2PACz layer preventing the formation of an intermixed p-doped PSS⁻ ion rich region (≈5–10 nm) at the bulk heterojunction-HTL contact interface, resulting in decreased recombination losses and improved stability. Moreover, the 2PACz monolayer is also found to reduce electrical shunts that ultimately yield improved performance in large area devices with PCE enhanced from 12.3% to 13.3% in 1 cm² cells.     

Solid Solvation Assisted Electrical Doping Conserves High-Performance in 500 nm Active Layer Organic Solar Cells

Organic solar cells (OSCs) process fascinating solution-printing capability to achieve low-cost and large-scale manufacture. However, the rapid power conversion efficiency (PCE) decay with active layer thickness enlargement inhibits the implement of OSCs’ potential advantages. To overcome the bottlenecks of PCE decay in thick active layer OSCs, the electrical doping with componential selectivity in bulk heterojunction (BHJ) film is achieved by introducing a solid solvation additive. Benefiting from the higher exciton splitting efficiency together with the longer drift (L_dr) and diffusion (L_diff) lengths, an OSC with 100 nm BHJ film demonstrates a PCE increment from 16.44% to 18.24% with prolonged dark and illuminated storage stabilities. Applying the solid solvation assisted (SSA) doping method in the OSCs with 500 nm active layer, the PCE significantly increases by 31.9%, from the original value of 11.79% to 15.55%. It further improves to 15.84% in a ternary blend thick-film device, which is the record value to the best of our knowledge. Besides, the SSA doping narrows the PCE gap between the 0.04 and 1 cm² devices. All improvements demonstrate the great potential of SSA doping for OSC commercial manufacture, since it optimizes the photovoltaic performance under all practical conditions of long-term, thick-film, and large-area.     

基于太赫兹布拉格光纤的表面生物传感器

空心布拉格光纤在传感领域应用极为广泛。本文提出了一种基于带有缺陷层的太赫 兹(terahertz,THz)空心布拉格光纤的表面生物传感器,并对该传感器在太赫兹频段的细菌种类检测性能进行 分析。在太赫兹布拉格光纤中,高折射率光敏树脂层和低折射率空气层以纤芯为中心周期性 排列,在纤芯内壁沉积分析物引入缺陷模式。本文对提出的传感器性能进行了数值研究。仿 真结果表明,该传感器有很高的纤芯功率比,限制损耗在0.3 THz和0.45 TH z频 段有损耗峰,能得到可识别的特征频率,此特征频率用于细菌种类检测。当频率大于0.7 TH z时,该传感器可实现厚度无关的表面生物传感。本文所提出的基于太赫兹空心布拉格光纤 的 表面生物传感器可用于检测细菌种类,在微生物检测方面有很大的应用潜力。     

人工噪声辅助的多用户安全传输方法

针对传统人工噪声辅助的安全传输方法无法适用于发射天线数等于接收天线数的多用户(Multiuser, MU)多输入多输出(Multiple-Input Multiple-Output, MIMO)系统的问题,提出了一种人工噪声辅助的多用户安全传输新方法。通过合理设计人工噪声与预编码矩阵,该方法可在同时满足所有用户传输需求的基础上,显著提升发射天线数等于接收天线数的MU-MIMO系统的安全性。同时,针对提出的方法进行了检测算法与平均保密速率的推导与分析。理论分析与仿真结果表明,所提方法可有效提升无线通信系统的安全性,在信噪比为20 dB时,该方法较传统方法的平均保密速率提升达到120%。     

HPLC study of the binding of sulfinpyrazone to serum albumin

Summary A thin layer chromatographic method for a qualitative screening-test and a quantitative analysis of 2,4,6-TNT, biodegradation products, octogen and hexogen in ammunition wastes was developed using both polar and non-polar modified sorbents. For enrichment a solidphase extraction on LiChrolut® EN followed by removal with methanol/acetonitrile (11 v/v) was chosen. To imitate real samples, spiked tap water samples of known composition were used.     

Structure–retardation factor relationship of natural amino acids in two different mobile phases of RP-TLC

Abstract

Separation of amino acids (AAs) and their simple and inexpensive determination/identification is an interesting topic in biological and protein science, different food industries, and drug factories. Also, the presentation of the chromatographic behavior of compounds in a predictive model can be effective to estimate the structural/chemical properties of analyte and mobile phases. In this work for the first time, retardation factor (R_F) of 42 AAs in reversed-phase thin layer chromatography (RP-TLC) was modeled. Acetonitrile-sodium azide solution and 1,2 dioxane-sodium azide solution were two mobile phases which have been studied in this work. Results showed that the values of R_F are correlated with the structural properties of AAs and these properties had some similarities and differences in two noted mobile phases. For the TLC data in two mobile phases, five parametric linear models were suggested (R²_train = 0.93 and 0.97; R²_test = 0.93 and 0.99). The models were also evaluated with different statistical approaches. It was shown that increasing the sum of geometrical distances between N and O in AAs causes decreasing their R_F in RP-TLC using both mobile phases. Other structural effects of AAs on their separation in the desired RP-TLC system were also discussed.     

Thermal analysis and X-ray studies of chiral ferroelectric liquid crystalline materials and their binary mixtures

Summary Thermal properties of a homologous series of ferroelectric liquid crystals S-(-)-[4-(2-n-alkoxy-propionyloxy)]biphenyl-4'-[n-alkoxy-(3,5-dimethyl)]benzoate have been investigated by polarizing optical microscopy and differential scanning calorimetry. The mesophases were identified and confirmed by X-ray too. Three binary mixtures were prepared from the individual homologues. In one of the mixtures (Mix1), the ferroelectric SmC* phase has broadened and became enantiotropic. This mesophase remained monotropic in the other two mixtures (Mix2, Mix3). The chiral nematic N* phase did not appear in Mix1, but remained monotropic for the other two mixtures. Two molecular parameters, the layer spacing and the average intermolecular distance have been calculated from the X-ray results for the homologues and their mixtures. An intercalated tail-to-tail packing of molecules was found both in the single compounds and their mixtures resulting in the layer spacing about half of the molecular length of the single compounds.     

Accounting for the Adsorption of Anions When Interpreting the Mechanism of Electrodeposition of Metals from Complex Electrolytes: The Reaction Order by the Electrochemically Active Ion

The relationship between the current and the bulk concentration of complex ions during concurrent specific adsorption of an electrochemically active complex ion and a complexing ligand is considered. The effect of parameters that characterize adsorption of such ions and the structure of the electrical double layer on this relationship is analyzed.__________Translated from Elektrokhimiya, Vol. 41, No. 7, 2005, pp. 817–822.Original Russian Text Copyright © 2005 by Rogozhnikov.