DC-10Mb/s 0.5μm CMOS激光器驱动电路的实现

设计并实现了一种适用于DC-10Mb/s速率、兼容TTL和CMOS输入电平的激光器驱动电路.该电路通过片外电阻可以独立地设置激光器发送光脉冲的‘1’功率和‘0’功率,并以闭环方式实现稳定的‘1’,‘0’发送光功率.介绍了一种新颖的峰-峰值光功率检测的工作机制,并能得到稳定的峰-峰值光功率.整个电路采用CSMC 0.5μm混合信号CMOS工艺实现,芯片最大输出驱动电流为120mA,在不要求输入码型的情况下,发送光脉冲的消光比波动在-20- ＋80℃范围内小于0.6dB.     

丙丁烷TDLAS测量系统的吸收峰自动检测

基于丙丁烷在3.37μm处的基频吸收峰,使用相应中心波长的连续带间级联激光器和长光程吸收池,研制了基于波长调制技术的丙丁烷气体检测系统。为自动确定波长调制过程中的锯齿波中心值参数,基于电流与输出光频率的线性关系,通过均匀增加激光器驱动电流获得直接吸收光谱。使用基于洛伦兹线型的拟合算法确定吸收峰值对应电流,使锯齿波输出光以其为中心覆盖吸收峰。实验证明,以拟合结果31.94mA为中心值的锯齿波,在叠加频率为20 000Hz、幅值为0.03V的高频正弦调制波后,系统二次谐波峰值超过100mV。算法全过程不依赖标气和F-P标准具等精密光学器件,可适应实际生产条件下的系统自动定参。     

钨硅化物砷化镓Schottky接触的形成和特性

本文报道了钨硅化物-砷化镓Schottky接触的形成过程和电学特性.实验表明,WSi_x/GaAs Schottky接触具有优越的I-V特性,势垒高度保持在0.8V,理想性因子实际上保持在1,并具有高温稳定性.研究表明,除了硅化物的成份,表面处理工艺和硅化物淀积技术也将对Schottky接触的I-V特性和热稳定性产生强烈的影响.本文提出利用对GaAs衬底的溅射腐蚀和在淀积过程中加以负的衬底偏置能显著地改进金属层与衬底的粘附性.     

LED产业分析报告

分析了LED发光二极管的基本特点、应用领域和巨大的市场需求。调查了国内公司生产情况；对比了目前LED研发技术指标和需求的差距，通过获得的数据分析比较我国的优势和劣势，并提出该产业的发展前景和建议。     

增益饱和对半导体激光器调制特性的影响

本文用小信号分析法建立了半导体激光器调制的数学模拟，用这个模型研究了增益饱和对半导体激光器的功率调制，波长调制和ＣＰＲ值的影响。     

基于RGB-LED的高速双向可见光传输系统(英文)

In this paper,we propose and experimentally demonstrate a bi-directional indoor communication system based on visible light RGB-LED.Spectrally efficient modulation formats(QAM-OFDM),advanced digital signal processing,pre- and postequalization are adopted to compensate the severe frequency response of indoor channel.In this system,we utilize red-green-blue Light emitting diodes(LEDs),of which each color can be used to carry different signals.For downlink,the low frequencies of each color are used while for uplink,the high frequencies are used.The overall data rate of downlink and uplink are 1.15-Gb/s and 300-Mb/s.The bit error ratios(BERs) for all channels after0.7 m indoor delivery are below pre-forwarderror-correction(pre-FEC) threshold of3.8×l0~(-3) To the best of our knowledge,this is the highest data rate in bi-directional visible light communication system.     

Highly Customizable All Solution–Processed Polymer Light Emitting Diodes with Inkjet Printed Ag and Transfer Printed Conductive Polymer Electrodes

Inkjet and transfer printing processes are combined to easily form patterned poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films as top anodes of all solution–processed inverted polymer light emitting diodes (PLEDs) on rigid glass and flexible plastic substrates. An adhesive PEDOT:PSS ink is formulated and fully customizable patterns are obtained using the inkjet printing process. In order to transfer the patterned PEDOT:PSS films, adhesion properties at interfaces during multistep transfer printing processes are carefully adjusted. The transferred PEDOT:PSS film on the plastic substrates shows not only a sheet resistance of 260.6 Ω/□ and a transmittance of 92.1% at 550 nm wavelength but also excellent mechanical flexibility. The PLEDs with spin‐coated functional layers sandwiched between the transferred PEDOT:PSS top anodes and inkjet‐printed Ag bottom cathodes are fabricated. The fabricated PLEDs on the plastic substrates show a high current efficiency of 10.4 cd A^?1 and high mechanical stability. It is noted that because both Ag and PEDOT:PSS electrodes can be patterned with a high degree of freedom via the inkjet printing process, highly customizable PLEDs with various pattern sizes and shapes are demonstrated on the glass and plastic substrates. Finally, with all solution process, a 5 × 7 passive matrix PLED array is demonstrated.     

Littrow型光栅外腔半导体激光器的输出特性分析

在讨论光栅外腔半导体激光器理论的基础上.对影响Littrow型光栅外腔半导体激光器输出功率和线宽压窄的各种因素进行了数值模拟分析.研制了单纵模高质量激光输出的Littrow型光栅外腔半导体激光器,在工作电流为400 mA时,连续输出功率达到180 mW,线宽优于1 MHz.     

倒置型PLED的电致发光特性研究

提出一种以聚合物MEH PPV为发光材料,结构为Al/MEH PPV/CuPC/ITO的倒置型发光器件(I PLED)。对既是空穴传输层又是轰击缓冲层的CuPC厚度以及MEH PPV的浓度对器件性能影响的分析发现,在实验条件下,最佳的CuPC厚度约为3.5nm,最佳的MEH PPV浓度约为3‰;采用小分子染料红莫稀(Rubrene)对聚合物发光材料MEH PPV掺杂发现,器件的亮度从未掺杂的40 4cd·m2提高到掺杂后的207.7cd/m2,其发光峰从未掺杂的624nm蓝移到掺杂后的592nm,但其I V特性并没有明显的变化。     

小波降噪对TDLAS 干涉抑制的研究

基于多光程吸收池的可调谐半导体激光吸收光谱 (TDLAS) 系统在检测过程中容易出现噪声干扰, 影响着其 实际检测性能。针对这种干扰的特征进行分析, 提出利用小波降噪法来改善 TDLAS 系统的探测性能。首先依据理论 研究结果选择合适的小波函数和分解层数, 然后通过这种小波对叠加干扰的仿真信号进行滤波, 结果表明这种降噪技 术具有良好的去噪效果。最后利用小波降噪技术处理了实验采集的不同浓度气体的直接吸收光谱 (DAS) 和二次谐波 信号, 相比于原信号, 降噪后信号的信噪比从 0.4 增加到 259, 系统的检测限也达到 7×10−6, 表明小波降噪方法在气体 光谱检测中具有较高的应用价值。