红外半导体激光光镊的实验研究

激光光镊技术是一项在许多科学领域有广阔应用前景的技术。本文详细给出构建一台红外半导体激光光镊的设计思想及实例。由于采用了独特的对大功率多模红外激光选模整形和双透镜陷阱操纵技术等性能价格最优化选择 ,该系统易于构建 ,陷阱操作方便 ,其构建价格仅一般光镊的几十分之一 ,非常适合光镊技术的推广和一般实验室构建     

Pinhole density measurements of barriers deposited on low-k films

Evaluation of diffusion barrier integrity is an important issue in advanced interconnects. A diffusion barrier separating Cu from low-k must be as thin as possible and must not contain pinholes. We have developed a method for measuring pinhole density in diffusion barriers deposited on low-k materials. The method employs ellipsometric porosimetry for measuring diffusion of toluene in a porous low-k film beneath the barrier in question.     

Resonant-cavity-enhanced photodetectors and LEDs in the mid-infrared

In this paper we outline the use of resonant-cavity enhancement for increasing the exterior coupling efficiency of photodetectors and light-emitting diodes (LEDs) in the mid-infrared (MIR) spectral region. This method is potentially very important in the MIR because encapsulation is not presently feasible due to the lack of suitable materials. Among other potential applications, resonant-cavity-enhanced (RCE) photodetectors and LEDs could be particularly suitable for greenhouse gas detection because of their ‘pre-tunable’ spectrally narrowed resonantly enhanced peaks. We also present the optical characterization of an InAs RCE photodetector aimed at the detection of methane gas (λ≈3.3 μm), and an InAs/InAs_0.91Sb_0.09 resonant-cavity LED (RCLED) aimed at carbon dioxide gas (λ≈4.2 μm). The high peak responsivity of the RCE photodetector was 34.7 A/W at λ=3.14 μm, and the RCLED peaked at λ=3.96 μm. These are among the longest operating wavelengths for III–V RCE photodetectors and RCLEDs reported in the literature.     

固体激光器的灯泵浦和二极管泵浦方式比较

对固体激光器的灯泵浦和二极管泵浦方式进行了比较,详细分析了不同类型的固体激光器所适用的泵浦方式.指出二极管泵浦固体激光器是今后固体激光器的发展趋势.     

The design of molecules containing planar tetracoordinate carbon

A novel preference for planar tetracoordination was observed over the conventional tetrahedral arrangement in a new series of C₅H₂, C₅H₄, C₅H₄^1+/2+ and related compounds. The stability of these molecules is assessed with the ring-opening barriers, HOMO-LUMO gap, singlet-triplet energy differences and nucleus independent chemical shift values.     

10瓦级双包层光纤激光器

考虑到所用大功率激光二极管的光谱特性，对光纤激光器的基本法布里-珀罗腔型稍加改变，研制出激光二极管抽运的10w级双包层光纤激光器，获得最高功率为11．8w、波长1100mm的单模激光输出。     

光柱显示技术探讨

本文叙述自动化仪表用光柱显示技术的工作原理及器件结构，重点论述直流等离子体光柱，发光二极管光柱，真空荧光及液晶光柱器件的结构和驱动电路，还展望光柱显示的发展趋势。     

电子束装置运行稳定性的测量

 为了验证电子束装置的稳定性,分别对电流波形、电压波形进行了多次测量,对二极管放电时注入腔中电子均匀性进行了探测,最后改变二极管真空度测量了泵浦氩的荧光 谱的稳定性。     

自集成透镜InGaAsP／InPDHLED及其离子束铣技术

本文报道在国内首次采用离子束铣技术研制自集成透镜InGaAsP/InP DH LED的实验结果。采用烘烤正性光致抗蚀剂来形成球状掩膜适合于离子束铣,且重复性很好。为了获得光洁的刻蚀表面,刻蚀条件均已最优化。     

1.30μmDFB激光器组件的设计和制做及其工作原理

本文自行设计和制作了１．３０μｍＤＦＢ激光器组件的讨论了光隔离和光耦合原理。由于采用的激光器－光隔离器－光纤的一体化结构，大大增加了该组件的可用性。在实验中得到高达５５％的耦合效率。